ThomasNet Industrial Newsroom -

Amplifier has switchable high gain of 1,012 and 1,013 V/A.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 08 Oct 2008 07:39:36 -0500

Featuring low noise current of 0.18 fA/square root of Hz, Model LCA-2-10T allows measurement of currents in femto to pico Amp range. It comes in miniaturized, rugged aluminum housing that optimizes EMI shielding. Unit is suited for amplification of small currents close to DC generated by high impedance sources such as photodiodes, PMTs, ionization, and particle detectors. Applications include spectroscopy, photodiode amplification, A/D converters, and digital voltmeters.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Communication Systems and Equipment

Search for suppliers of: Current & Voltage Amplifiers | Low Noise Amplifiers

Differential Amplifiers can drive 14- and 16-bit ADCs.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 15 Aug 2008 07:28:59 -0500

Consuming less than 120 mW of power on single 3.3 V supply, single channel ADA4939-1 and dual channel ADA4939-2 differential amplifiers achieve 82 dB SFDR at 70 MHz. Operating over -40 to 105°C temperature range for both 3.3 and 5 V operation, units feature input voltage noise of 2.3 nV/rt Hz, -3 dB bandwidth of 1.4 GHz, and slew rate of 5,000 V/µS. Model ADA4939-2 can drive dual ADCs used in I/Q demodulation schemes, and offers low cross-talk of -80 dB at 100 MHz.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Differential Amplifiers | Low Noise Amplifiers

Modular Test Station tests traveling wave tubes.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 11 Aug 2008 07:46:09 -0500

Consisting of 19 in. rack with pre-installed distribution and control modules, Model PTT4100 tests low and medium power pulse/continuous wave TWTs used in communications and EW systems. Modular design allows user to configure system to exact requirements, and each self-contained module offers monitoring and display functions, BIT, and protection features. Anode, cathode, collector, focus electrode, and grid modules can be supplied according to customer requirements.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -
Test and Measuring Instruments

Search for suppliers of: Communications Testers | Traveling Wave Tubes

Low Noise Amplifiers offer optimal IP3 headroom.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 11 Aug 2008 07:45:23 -0500

Drawing 425 mA from 12 V supply, Models JCA02-4000, JCA24-4001, and JCA48-4000 feature frequency bands of 0.5-2, 2-4, and 4-8 GHz, respectively. Units offer noise figures under 2 dB up through C-Band, output P1dB levels of +24 dBm, and output IP3 headroom levels of 15 dB or greater above output P1dB compression point. In addition, LNAs deliver saturated output power levels approaching +27 dBm, I/O return loss of 11 dB min across operating bandwidth, and signal gain of 35 dB or more.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Low Noise Amplifiers

Broadband Amplifier covers 100 MHz to 6 GHz frequency range.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 04 Aug 2008 07:52:02 -0500

Housed in 1.25 x 1.25 x 0.59 in. aluminum enclosure with 3 SMA connectors, Model CRBAMP-100-6000 RedBox is low-noise general purpose connectorized amplifier featuring signal gain of 18 dB with output power of 17 dBm (P1dB). It also features typical noise figure of 3.5 dB with IP3 of +30 dBm. Suited for IF or RF buffer amplifiers, base stations, high-reliability applications, and general lab use, unit operates from single +5 V supply consuming only 60 mA.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: RF Amplifiers | Low Noise Amplifiers | Intermediate Frequency (IF) Amplifiers | Broadband Amplifiers

Amplifier suits cable set-top boxes and digital TV tuners.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 07 Jul 2008 07:38:28 -0500

Operating on single 5 V supply, CXE-1089Z GaAs pHEMT Low Noise Amplifier utilizes Darlington configuration and features active bias circuitry, which stabilizes bias current across changes in threshold voltage related to temperature and process variation. Unit features typical noise figure of 2.8 dB, CTB of -79 dBc, and CSO of -66 dBc at 110 channels. Housed in SOT-89 package, amplifier provides gain response of 13 dB ±0.4 dB over 50-1,000 MHz.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Low Noise Amplifiers

Programmable Gain Amplifier is optimized for DOCSIS 3.0.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 03 Jul 2008 07:29:58 -0500

Operating in 5-85 MHz frequency range, Model ARA2017 supports DOCSIS 3.0-specified signal levels of +64 dBmV while minimizing harmonic distortion and output noise levels. Linear amplifier features 33 dB of RF gain at minimum attenuation, and includes digitally controlled, multi-stage precision step attenuator that provides up to 58 dB of attenuation in 2 dB increments. Requiring single 5 V supply, device is offered in 28-pin 5 x 5 x 1 mm QFN package.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Linear Amplifiers | Low Noise Amplifiers | Programmable Amplifiers | RF Power Amplifiers

Solid State Ruggedized Amplifier features noise quieting.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 05 Jun 2008 07:36:21 -0500

Measuring 5.25 in. high and weighing less than 45 lb, SMIV ruggedized Solid State Amplifiers incorporate the latest in solid state technology. This unit operates from 400-1,000 MHz as standard at 200 W. Other frequency ranges and power levels are available, and these devices are designed for fixed and mobile applications.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: High Power Amplifiers | Microwave Amplifiers | Power Amplifiers | RF Amplifiers | RF Power Amplifiers | Solid State Amplifiers | Traveling Wave Tube Amplifiers

Dual-Mode VHF-to-UHF LNA is designed for portable systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 27 Mar 2008 07:53:12 -0500

Supplied in 6-pin CST package, TA4029CTC low noise amplifier (LNA) promotes performance optimization in portable systems equipped with built-in TV tuner. Pass-through mode allows strong signals to bypass LNA to prevent degradation of received signal quality, while LNA mode amplifies weak signals to improve reception sensitivity. Another feature, LNA shutdown capability, reduces power consumption by shutting down LNA in pass-through mode.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Integrated Circuits (IC) | Low Noise Amplifiers

Preamplifier has -0.06 dB attenuation factor.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 19 Mar 2008 07:37:45 -0500

Designed for NVH powertrain and vehicle underhood testing applications, Model HT426E01 high temperature preamplifier operates from ICP® sensor power, terminating with BNC connector and utilizing standard coaxial cables. With ability to operate to +120°C, it measures ½ in., and features noise characteristics of 4.9 µV based on A-weight scale. Common automotive applications include underhood measurements, near-field measurements on manifolds, and exhaust after treatment components.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Low Noise Amplifiers | Preamplifiers

Array Amplifier uses far field noise suppression technology.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 07 Mar 2008 07:36:27 -0500

Eliminating output frequency distortions and other audio artifacts, PowerWise LMV1088 dual-input microphone array amplifier delivers natural-sounding voice quality in mobile phones, 2-way radios, and powered headsets. Offered in 3.5 x 3.5 mm, 36-bump micro SMDxt package, it draws only 1 mA of supply current, and has power supply rejection ratio of 85 dB at 1 kHz with typical signal-to-noise ratio of 60 dB and less than 1% total harmonic distortion plus noise.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Analog Amplifiers | Low Noise Amplifiers

Tunable Low Noise Amplifiers achieve less than 1 dB.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 29 Feb 2008 07:48:59 -0500

Developed on LH3 0.5 µm pHEMT process and supplied in RoHS-compliant SOT-26 SMT plastic package, M/A-COM MAAL-007304 and MAAL-007306 have noise figures less than 1 dB across respective designed frequency ranges of up to 3 or 2 GHz. They employ monolithic, 2-stage, self-biased design and operate from one 3.0 V supply. Supplied in RoHS-compliant SC-70 SMT plastic package, MAAL-008550 employs single-stage self-biased design and achieves 0.75 dB noise figure up to 2.3 GHz.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Low Noise Amplifiers

LNA is suited for GPS, Galileo, and GLONASS applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 26 Nov 2007 07:42:38 -0500

Model MAX2659 low-noise amplifier achieves 20.5 dB gain and low noise figure of 0.8 dB while maximizing input-referred 1 dB compression point and third-order intercept point at -12 and -2 dBm, respectively. It operates from +1.6 to +3.3 V single supply, consumes 4 mA, and reduces supply current to less than 1 µA in shutdown mode. Available in 1.5 x 1.0 x 0.75 mm, leadless, 6-pin DFN package, unit is specified over -40 to +85°C temperature range.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Low Noise Amplifiers

Low Noise Amplifier has operating range of 5.0-9.0 GHz.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 26 Nov 2007 07:42:38 -0500

Featuring variable gain control of 0-5 V and 25-38 dB gain, M/A-COM MAAM-007095-A3GVSA 2-stage variable gain amplifier suits military, space radar, tactical communications systems, and commercial point-to-point radio applications. Matched to 50 W on both input and output, it has typical noise figure of 2 dB with 1 dB compression point of 17 dB. Amplifier utilizes 12-15 V power supply, and can be mounted in either connectorized or drop-in configuration.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Low Noise Amplifiers | Communications Amplifiers | Variable Gain Amplifiers

Precision Comparator comes with integrated 2.048 V reference.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 Nov 2007 07:41:35 -0500

Built on VIP50 BiCMOS process technology, Model LMP7300 features low-offset voltage of 300 µV, supply current of 10 µA, and supply voltage range of 2.7-12 V for use in 3.3, 5, and ±5 V applications. Low-power amplifier offers adjustable hysteresis and less than 5 µsec propagation delay to enable precise and high-accuracy signal detection. Available in 8-pin SOIC package, unit is suited for precision battery-operated systems.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Low Voltage Amplifiers | Low Noise Amplifiers | Integrated Circuits (IC)

Low Noise Amplifier suits military applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 02 Nov 2007 07:42:44 -0500

Featuring variable gain control of 0-5 V and 25-38 dB gain, 2-stage Model MAAM-007095-A3GVSA can be used as low noise amplifier, intermediate amplifier, or driver stage amplifier in communications as well as military and space radar applications. Typical noise figure is 2 dB with 1 dB compression point of 17 dB. Utilizing 12-15 V power supply, amplifier resides in hermitically sealed housing and can accommodate field-replaceable SMA or GPO connectors.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Variable Gain Amplifiers | Low Noise Amplifiers

Integrated Front End is optimized for Zigbee® modules.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 04 Oct 2007 07:58:33 -0500

Model RIF211 provides complete front end capability with power amplifier, low-noise amplifier, and antenna switch. It features power amplifier with current draw of 120 mA while transmitting at 20 dBm output. MMIC includes high gain very low noise LNA (LNA Gain = 15 dB, NF less than 1.0 dB), as well biasing circuitry in miniature 16-pin 3 x 3 x 0.5 mm QFN package. Module is fully matched internally to a 50 ohm output and input impedance.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Integrated Circuits (IC) | Power Amplifiers | Low Noise Amplifiers | Microwave Monolithic Integrated Circuit (MMIC) Amplifiers

Precision Op Amps feature low-noise design.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 21 Sep 2007 07:52:03 -0500

Built on VIP50 BiCMOS process, LMP7731 (single) and LMP7732 (dual) precision op amps provide input voltage noise of 2.9 nV/sqrt Hz with 1/f noise corner of 3 Hz. They also feature 0-10 Hz peak-to-peak noise voltage of 78 nVpp, ensuring accurate signal conditioning while minimizing distortion in low-frequency sensor applications. Bipolar input stages with input bias cancellation circuitry lowers input current to 1.5 nA. Technology supports DAQ systems of 16 bits or greater.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Operational Amplifiers | Low Noise Amplifiers

Power Amplifier has integrated boost converter.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 13 Sep 2007 07:45:37 -0500

Monolithic, filter-free, Class-D audio power amp (TPA2013D1) features integrated boost converter that provides adjustable constant output power up to 1.5 W in entire Li-Ion battery range of 2.3-4.8 V, making audio output power insensitive to battery voltage fluctuations. Exhibiting 85% overall efficiency, solution generates high output power from 1.8-5.5 V supply voltage without distorting audio. It provides max output power of 2.7 W across 4 W load or 2.2 W across 8 W load.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Low Noise Amplifiers | Power Amplifiers | Audio Frequency (AF) Amplifiers

Amplifier is modular and stackable.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 03 Jul 2007 07:39:19 -0500

Offering dual duplex operation, ClearGain DD1900 Ground-Mounted Amplifier (GMA) incorporates fixed-gain, low-noise amplifier and high-performance filters. Without need for tower climbs, GMA improves signal quality by boosting uplink (RX) signal of mobile system. Amplifying full 1,900 MHz band, it consists of amplification module and power distribution unit, providing full compatibility with all base stations.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Low Noise Amplifiers