ThomasNet Industrial Newsroom -

Multi-Reel Rewinder suits high-speed stamping processes.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 21 Jul 2005 09:03:45 -0500

To maximize unattended winding capacity, automatic Wyndamster 3210 incorporates 10-reel operation with side-by-side reel design. It coils any product strip up to 2.5 in. wide and accommodates reels up to 30 in. in dia. Operating at speeds up to 650 ipm, machine can function in overwind or underwind mode; complete conversion from one direction to other takes less than 1 min. Features include tangential feeder and paper interleaf with programmable tension control.

This story is related to the following:
Material Handling and Storage
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Rewinders | Winding Machinery

Core Slip Rewinding System provides constant coil tension.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 20 Sep 2004 08:20:04 -0500

Slip Tech system consists of core winding surface made entirely of bearings, which reduce friction between core surface and winding drum. This eliminates excess tension in individual rewound coils during build up, resulting in ability to maintain consistent coil tension because each strip is independently tensioned from core to finished coil OD. Product can also eliminate need for looping pits in some applications.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Material Handling and Storage
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Reeling & Coiling Machinery | Winding Machinery | Rewinders

Multi-Spindle Winder offer max line speed of 500 fpm.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 16 Jul 2004 07:41:13 -0500

Modular Model MS 104 runs either independently or series-coupled with other modules to control entire take-up line. Each module contains 20 moving parts, and all components are accessible from front or rear of unit. With standard tension of 8â�"32 oz, winder handles packages weighing up to 80 lb and measuring up to 18 in. diameter and 12 in. wide. Adjustable traverse assembly and lay on roller guides make system adaptable to spool or coil winding of flat materials.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Winding Machinery | Coil Winding Machinery | Spooling Machinery

Screen Winder/Wrapper produces up to 20 rolls/min.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 08 Jul 2004 07:33:12 -0500

Model ESW-48 rewinds and wraps aluminum wire screen and fiberglass insect window screening. Cut lengths of 7-25 ft are standard. Roll widths range from 24â�"48 in. with finished roll diameter up to 4.25 in. Integral wrapper automatically introduces wrapping film into extended tail of roll as it exits rolling head. Overwrap shrink-film rolls, up to 54 in. wide and 10 in. diameter, can be used. After wrapping, roll ends are automatically tucked and shrunk.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Packaging Products & Equipment

Search for suppliers of: Roll Wrapping Machinery | Winding Machinery

Modular Pay-Off handles fine and very fine wire.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 17 May 2004 07:46:42 -0500

Motorized Payoff utilizes low-stress, French Curve unwind path and accommodates fine wire materials from .006â�".050 in. diameter. It features snag detection sensor and shutdown signal output, controlled back tension for precise control of any downstream straightening process, as well as built-in loop control reservoir for up to 4 ft of pulled wire. Accommodating up to 60 lb of material, payoff can be spool or coil configured with standard OD of 24 in.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Pay-Offs & Pay-Outs

Winding System winds ferrous and non-ferrous metal strip.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Mar 2004 07:39:19 -0500

Model 620 features oscillating spindle that allows material to remain in fixed position while spool moves back and forth. Accurate traverse and pitch control from 1/8 to 1½ in. minimizes camber and results in solid, damage-free wind build. System is suited for secondary operations such as single strand rewind lines or converting pancake coils into traverse wound stock, as well as level winding product downstream from intermittent operation.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Winding Machinery

Winding System handles fine, delicate materials.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 Jan 2004 07:32:54 -0500

Featuring both spooler and pay off, table top Model RS100 can be operated from standing or sitting position. Control panel offers digital entry of winding parameters such as package width and material length. Stepper motor provides pitch control with digital readout in .0001 in. or 2.5 micron increments. Speed and tension are managed ultrasonically with non-contact loop detector. By regulating DC drive motors, system is capable of 600 fpm speeds on 6 in. core.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Winding Machinery

Winders suit film and sheet applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 08 Aug 2003 07:37:42 -0500

Suited for winding rolls up to 29 in. wide for narrow web production, Killion KXE winders are offered in single, dual, and multi-shaft versions with fixed or turret configurations. Options include cone or air shaft core location and collapsible mandrels. Supplied with cantilevered shaft, products operate as self-contained, compact units and may be used on any width line for line speeds up to 100 m/min.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Turret Winders | Film Winders | Winding Machinery

Winder incorporates Accu-Wind control system.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Oct 2002 08:39:27 -0500

Model MS 103-LD PMC, with dual spindle design, winds continuous lengths of difficult profile products. Both spindles operate through common dancer system to minimize change-over from full to empty spool. Accu-Wind manages machine functions/winding patterns, insuring precise placement of successive layers while maintaining tension and pitch controls. Line speed is rated to 500 FPM, package width and winding diameter is up to 16 in., and package weight is up to 60 lbs.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Winding Machinery | Winders

Strapping Winder offers modular flexibility.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 04 Feb 2002 07:42:32 -0500

Model MS120T runs either independently or series-coupled with other modules to wind as many strips as necessary. Each module contains 2 alternately driven spindles mounted in common steel frame. MS120T can handle packages 16 in. in diameter, and 12 in. wide, at up to 60 lb weight. Adjustable traverse assembly and guiding options make system adaptable to spool or coil winding of flat materials. Standard tension range is 2 to 8 lb. Maximum line speed is 500 FPM.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Winding Machinery | Winders

Winding Machine features modular design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 19 Dec 2001 07:45:19 -0500

Model MS 102 provides programmable control in dual spindle design. Multiple configurations of banks of up to 12 winding stations allow winding multiple strips simultaneously. Each module incorporates 2 individual speed, tension and control dancer systems. Computer control manages all machine functions and winding patterns. Unit features package width up to 21 in., winding diameter up to 16 in., package weight up to 60 lb, and line speed to 500 fpm.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Winding Machinery