ThomasNet Industrial Newsroom -

Current Amplifier measures in femto to pico Ampere range.

info@productnews.com (ThomasNet News) — Mon, 23 Nov 2009 08:30:05 -0500

FEMTO DDPCA-300 variable gain ultra low noise current amplifier has switchable gain from 104-1013 V/A. It features noise input of 0.4 fA/sq-rt Hz min, allowing measurement of currents in femto to pico Ampere range. Dynamic range is 240 dB. Product is available in miniaturized, rugged aluminum housing designed to optimize EMI shielding, and features adjustable voltage directly on amplifier input for DUT biasing, and remote interface.

This story is related to the following:
Electronic Components and Devices
Communication Systems and Equipment

Search for suppliers of: Variable Gain Amplifiers | Low Noise Amplifiers | DC Amplifiers

Marine GPS Antenna offers 5 times/sec position update rate.

info@productnews.com (ThomasNet News) — Wed, 11 Nov 2009 08:39:29 -0500

Optimized for sensitivity, accuracy, and rapid acquisition times, 5 Hz GS15 comes in 3 in. housing and is compatible with WAAS, EGNOS, and SBAS. Exact Course Over Ground (COG) feature, usable at any speed as well as in tight turns, offers users precise chart synchronization. Fully waterproof unit also includes 16-channel receiver that provides rapid signal acquisition and locking capability, promoting faster start position location and consistent position accuracy.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Marine Antennas | Global Positioning System (GPS) Antennas

Marine Satellite TV Antennas operate in all global markets.

info@productnews.com (ThomasNet News) — Wed, 11 Nov 2009 08:39:29 -0500

Featuring Intellian multi-band WorldView low noise block module, W-Series includes two commercial 3-axis stabilized satellite TV antennas, t110W and t130W, and two recreational 2-axis models, i6W and i9W. LNB module receives both circular polarized signals used in America and linear polarized signals that are standard elsewhere. In addition, antennas include Intellian's Wide Angle Search algorithm for fast signal acquisition, and Dynamic Beam Tilting signal locking technology.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Television Antennas | Satellite Antennas | Marine Antennas

Plenum Amplifier suits commercial/educational environments.

info@productnews.com (ThomasNet News) — Mon, 09 Nov 2009 08:39:43 -0500

Compact, 18 V, 45 W, plenum rated amplifier/mixer, model PlenumAmp PMA-245 accepts both RCA and 3.5 mm stereo inputs. With independent mixer volume controls for each source, unit is designed for use with data projectors. Built-in noise filtration circuitry ensures clear audio performance. Measuring 5.43 x 1.65 x 4.80 in., chassis features heat-sink to dissipate heat effectively.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices

Search for suppliers of: Low Noise Amplifiers | Video Amplifiers | Audio Amplifiers

Active GPS Antennas measure 50 x 30 x 5.45 mm.

info@productnews.com (ThomasNet News) — Fri, 30 Oct 2009 08:45:05 -0500

Combining pulse ceramic chip antenna with low noise amplifier (LNA), ovular W4000 series receives, amplifies, and filters GPS signals for telematics applications. It is designed for in-vehicle mounting and can be positioned on dashboard or window without concerns about orientation. Offered in 4 models with various connectors, antennas operate at 1,575.42 MHz and 3-5 V, with max gain of 1.5 dB isotropic and 28 dB with LNA having 1 dB noise figure.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Vehicle Tracking Antennas | Global Positioning System (GPS) Antennas | Antennas

Stubby GPS Antennas provide L1 band connectivity.

info@productnews.com (ThomasNet News) — Wed, 28 Oct 2009 08:34:11 -0500

Enclosed in miniature package, passive Model EPL 09-13 and active Model EPL 09-14 feature standard SMA coaxial connector interface and are suitable for handheld GPS receivers, handheld tactical radios with GPS capabilities, and sensors. Measuring 1.75 in., both units feature GPS L1 1575.42 MHz frequency, 50 W nominal impedance, and 3:1 max VSWR. Model EPL 09-13 provides -4 dBi ±1 dB gain, while Model EPL 09-14 has -3 dBi ±1 dB gain and 16 dB active gain.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Radio Antennas | Global Positioning System (GPS) Antennas

M2M Development Kit helps build satellite-enabled products.

info@productnews.com (ThomasNet News) — Wed, 14 Oct 2009 08:33:02 -0500

Operating on ORBCOMM low-earth orbit satellite network, Digi m10 JumpStart Kit enables M2M communications with global coverage capability, allowing companies to monitor and manage remote assets deployed in locations where cellular or other land-based communications are not available. Satellite modem is built on mixed signal ASIC and offers design integration through serial interface. It supports industrial temperature and operational shock/vibration specifications exceeding SAE J1455.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Satellite Components, Parts & Systems | Satellite Receivers | Satellite Communication Systems

Dual Frequency Smart Antennas feature optional radio modem.

info@productnews.com (ThomasNet News) — Tue, 06 Oct 2009 08:37:02 -0500

Capable of supporting RTK, SBAS, and OmniSTAR® HP/XP corrections, A220 and A221 deliver centimeter-level positioning accuracy for precise guidance, machine control, and survey applications. They provide multiple mounting options, and dual-serial, USB, CAN, and pulse output options for interfacing with various external devices. A220 features LED status indicators for power, GPS, and DGPS, while A221 additionally features built in menu system and 4-line LCD display.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Global Positioning System (GPS) Antennas | Satellite Antennas

DGPS Receiver suits GIS mapping and surveying applications.

info@productnews.com (ThomasNet News) — Tue, 06 Oct 2009 08:37:02 -0500

Designed to work with TDS Nomad(TM) handheld GIS data collection device, XF102 records raw GPS data for post-processed mapping or survey-grade positioning accuracy. Device includes rugged, maintenance-free smart antenna and Compact Flash adapter, and offers fast start-up and reacquisition times. Unit supports SBAS differential corrections and e-Dif® extended differential option, and if receiver temporarily loses differential signal, COAST(TM) technology maintains accuracy for up to 40 min.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Frequency Receivers | Satellite Receivers

Audio Op Amp delivers low noise and distortion.

info@productnews.com (ThomasNet News) — Mon, 21 Sep 2009 08:32:47 -0500

Housed in SO-8 package, Model OPA1612 achieves 1.1 nV √Hz noise density with ultra-low distortion of 0.000015% at 1 kHz. Rail-to-rail output swing to within 600 mV with 2 W load maximizes dynamic range. Featuring wide supply range of ±2.25 to ±18 V from 3.6 mA of supply current per channel, dual-channel, bipolar-input op amp is suited for professional audio and broadcast studio equipment, microphone pre-amplifiers, and A/V receivers.

This story is related to the following:
Electronic Components and Devices
Communication Systems and Equipment

Search for suppliers of: Application Specific Integrated Circuits (ASIC) | Operational Amplifiers | Low Noise Amplifiers | Audio Frequency (AF) Amplifiers

GPS Synchronized Time Reference has integrated antenna.

info@productnews.com (ThomasNet News) — Thu, 17 Sep 2009 08:29:05 -0500

Based on CW25 GPS timing receiver, CW47, GPS timing reference outputs E1 G.703 2.048 Mbps signal from outdoor mountable housing to provide reliable timing reference for mobile networks. It can also provide E1 G.703 2.048 MHz clock or T1 G.703 1.544 Mbps signal. Receiver can track satellites down to -155 dBm and autonomously acquire satellite signal levels as low as -143 dBm. Unit can be used for E1 synchronization, T1 synchronization, indoor timing, and remote site location applications.

This story is related to the following:
Transportation Industry Products Sponsored by: Terra Environmental Technologies, A Terra Industries Co. - Untitled
Communication Systems and Equipment

Search for suppliers of: Global Positioning Systems (GPS) | Satellite Receivers

Set-Top Box SoCs enable multi-room DVR throughout home.

info@productnews.com (ThomasNet News) — Tue, 15 Sep 2009 08:31:05 -0500

Equipped with Multimedia over Coax Alliance 1.1 core, Model BCM7342 acts as media center to enable service providers to offer multi-room DVR capabilities, while Model BCM7340 acts as thin media client, allowing multiple users to store, time shift, or access content from media servers or residential gateways for playback on STBs anywhere in home. Both satellite receivers feature dynamic power management controllers, capable of shutting down unused system components in real-time.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices
Computer Hardware and Peripherals

Search for suppliers of: Satellite Receivers | Integrated Video Circuits

GPS Timing Receiver targets WiMax applications.

info@productnews.com (ThomasNet News) — Fri, 11 Sep 2009 08:35:06 -0500

Designed for synchronization and timing in WiMax applications, surface mount TiMax Wi125 features programmable NCO oscillator that outputs synthesized frequency up to 30 MHz, which is steered by GPS receiver. Self-survey mode allows receiver to enter position hold mode, allowing accurate timing to be continued with only 1 satellite being tracked. Additional features include phase alignment of 1 PPS/10 MHz and GPS/UTC time/scale synchronization to 25 ns RMS.

This story is related to the following:
Communication Systems and Equipment
Transportation Industry Products Sponsored by: Terra Environmental Technologies, A Terra Industries Co. - Untitled

Search for suppliers of: Satellite Receivers | Global Positioning Systems (GPS)

GPS Receivers support asset and inventory tracking.

info@productnews.com (ThomasNet News) — Thu, 10 Sep 2009 08:30:09 -0500

Integrating Ekahau's location tracking software, FCC Certified NavTrac Wi-Fi-enabled GPS Devices can track location of assets and inventory in any environment. GPS solution delivers low signal strength GPS tracking data for outdoor and other GPS coverage areas, while Ekahau Positioning Engine and its algorithms calculate precise real-time location in indoor environments or campus settings where GPS visibility may be limited.

This story is related to the following:
Communication Systems and Equipment
Transportation Industry Products Sponsored by: Terra Environmental Technologies, A Terra Industries Co. - Untitled

Search for suppliers of: Satellite Receivers | Global Positioning Systems (GPS)

GPS Receiver Module utilizes AEC-Q compliant components.

info@productnews.com (ThomasNet News) — Wed, 26 Aug 2009 08:28:49 -0500

Based on SiRFstarIII chipset, Model A1088-A is completely shielded and designed for use with active antennas, reaching acquisition sensitivity of -145 dBm. In tracking mode, sensitivity goes down to -159 dBm and current draw is typically 32 mA at 3.3 V. Module includes additional low power modes where current draw can be reduced to 10 µA. Measuring 19 x 28 mm², module is specified for industrial temperature range of -40 to +85°C and is intended for automotive use.

This story is related to the following:
Communication Systems and Equipment
Transportation Industry Products Sponsored by: Terra Environmental Technologies, A Terra Industries Co. - Untitled

Search for suppliers of: Satellite Receivers | Global Positioning Systems (GPS)

Prepreg meets needs of satellite structure manufacturers.

info@productnews.com (ThomasNet News) — Fri, 21 Aug 2009 08:38:34 -0500

By utilizing 250°F cure temperature coupled with minimal moisture absorption, TC410 cyanate ester prepreg resin system addresses dimensional stability requirements in optical benches, reflectors, and satellite structures. Combination of properties reduces residual stresses in composite components, minimizing effects of thermocycling on these components in space. System achieves 0.35% neat resin absorption after 300+ days at 75% RH.

This story is related to the following:
Communication Systems and Equipment
Materials and Material Processing
Chemical Processing and Waste Management

Search for suppliers of: Nylon Resins | Satellite Components, Parts & Systems | Molding Resins | Resins | Prepregs

Amplifier suits automotive entry/tire pressure monitoring.

info@productnews.com (ThomasNet News) — Mon, 17 Aug 2009 08:30:08 -0500

Operating in 315 and 433 MHz bands, MAX2634 is designed for remote keyless entry and tire pressure monitoring applications. It consumes 2.5 mA of supply current and eshibits 1.25 dB noise. Logic-enabled shutdown reduces supply current to under 1 µA. Contained in 2.0 x 2.2 mm, 6-pin SC70 package, amplifier operates from 2.2-5.5 V supply and is specified over -40 to +125°C temperature range. MAX2634 is fully qualified to meet certification requirements of AEC-Q100 standard.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices

Search for suppliers of: Low Noise Amplifiers | Frequency Amplifiers

Dual Ultra-Low-Noise Amplifier features selectable gain.

info@productnews.com (ThomasNet News) — Tue, 11 Aug 2009 08:30:45 -0500

Available with active impedance matching, Model AD8432 is suited for high channel count communications and medical applications that require up to 200 MHz of bandwidth. Single-ended-input amplifier operates on single 5 V supply and provides differential output optimized to drive I/Q demodulators and phase shifters. Housed in 4 x 4 mm package, amplifier operates from -40 to +85°C and offers selectable gains of 4, 8, 12, or 16 via pin-strapping options.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Low Noise Amplifiers

HDTV Antennas feature marine-grade design.

info@productnews.com (ThomasNet News) — Thu, 09 Jul 2009 08:33:51 -0500

Able to receive signals from all DIRECTV satellites, d-Series single-dome antennas are suitable for small boats through large yachts, and can be installed on Bimini/buggy top frames or small hard/arch tops. Dual-band units incorporate wide range search algorithm to search, find, and hold satellite signals, and dynamic beam tilting technology to ensure clear, interruption-free program viewing. Featuring IPx6 rating, antennas operate in ±25° rolls and ±15° pitches at 45°/sec.

This story is related to the following:
Communication Systems and Equipment

Search for suppliers of: Television Antennas | Marine Antennas | Satellite Antennas

Multi-Satellite Gateway facilitates system expansion.

info@productnews.com (ThomasNet News) — Tue, 23 Jun 2009 08:27:41 -0500

Pre-wired to facilitate multi-satellite/multi-transponder expansion, HX Gateway performs network management and dynamic bandwidth assignment functions. System provides satellite broadband operators with software that offers TCP/IP acceleration processing with more than 10 Mbps throughput and end-to-end VLAN tagging for VLAN partition management. Based on IPoS standard, system can be readily configured to provide specified QoS for each link and has optimized bandwidth allocation scheme.

This story is related to the following:
Computer Hardware and Peripherals
Communication Systems and Equipment

Search for suppliers of: Gateways | Satellite Communication Systems | Satellite Communication Networks