ThomasNet Industrial Newsroom -

Modular Test Station tests traveling wave tubes.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 11 Aug 2008 07:46:09 -0500

Consisting of 19 in. rack with pre-installed distribution and control modules, Model PTT4100 tests low and medium power pulse/continuous wave TWTs used in communications and EW systems. Modular design allows user to configure system to exact requirements, and each self-contained module offers monitoring and display functions, BIT, and protection features. Anode, cathode, collector, focus electrode, and grid modules can be supplied according to customer requirements.

This story is related to the following:
Test and Measuring Instruments
Electronic Components and Devices Sponsored by: Lumera Corporation -
Communication Systems and Equipment

Search for suppliers of: Communications Testers | Traveling Wave Tubes

Power Amplifier features 6-18 GHz frequency range.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Aug 2008 08:07:44 -0500

Designed for defense electronics and homeland security industries, CHPA0618-1 ultra-broadband power amplifier incorporates GaAs MMIC technology into Spatium(TM) broadband spatial combining architecture. Unit has multiple element architecture that provides protection from single point failures and enables dispersive, 3D heat dissipation. Featuring 40 W typical saturated power, it includes soft-fail in event of device failure, with no warm-up or turn-on delay.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Microwave Monolithic Integrated Circuit (MMIC) Amplifiers | Broadband Amplifiers | Power Amplifiers

Broadband Amplifier covers 100 MHz to 6 GHz frequency range.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 04 Aug 2008 07:52:02 -0500

Housed in 1.25 x 1.25 x 0.59 in. aluminum enclosure with 3 SMA connectors, Model CRBAMP-100-6000 RedBox is low-noise general purpose connectorized amplifier featuring signal gain of 18 dB with output power of 17 dBm (P1dB). It also features typical noise figure of 3.5 dB with IP3 of +30 dBm. Suited for IF or RF buffer amplifiers, base stations, high-reliability applications, and general lab use, unit operates from single +5 V supply consuming only 60 mA.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: RF Amplifiers | Low Noise Amplifiers | Intermediate Frequency (IF) Amplifiers | Broadband Amplifiers

MMIC Amplifiers deliver 5 W and 25 W CW RF output power.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 26 Jun 2008 07:36:18 -0500

Integrating GaN RF transistor technology, 5 W distributed amplifier, Model CMPA0060005 operates from DC to 6 GHz, while 25 W reactively matched Model CMPA2560025 operates from 2.5-6 GHz. Both MMICs are suitable for variety of applications where high power over broad bandwidths is required. Pair of CMPA2560025s, driven by CMPA0060005 can provide over 40 dB gain with output power up to 50 W in 2.5-6 GHz band.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Communication Systems and Equipment

Search for suppliers of: Microwave Monolithic Integrated Circuits (MMIC) | Microwave Monolithic Integrated Circuit (MMIC) Amplifiers

Microwave Amplifier utilizes traveling wave tube technology.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 05 Jun 2008 07:36:21 -0500

Measuring 5.25 in. high and weighing 45 lb, SMC Ruggedized Microwave Amplifiers incorporate Traveling Wave Tube (TWT) technology and feature noise quieting as standard. Products are rated from 400 MHz to 1.0 GHz, 200 W, and suit outdoor mobile as well as fixed applications. Versions are also available in other frequency ranges to meet customer requirements.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: High Power Amplifiers | Microwave Amplifiers | Power Amplifiers | RF Amplifiers | RF Power Amplifiers | Solid State Amplifiers | Traveling Wave Tube Amplifiers

HBT Amplifier targets WLAN and WiMAX applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 25 Apr 2008 07:52:49 -0500

Featuring 4.9-5.9 GHz operating range, 2 W Model SZP-5026Z is optimized for use as either final or driver stage in WiMAX equipment. Single-stage, Class AB, InGaP Heterojunction Bipolar Transistor amplifier delivers error vector magnitude performance of 2.5% at 25.5 dBm output power. Operating from 3-5 V supply, device includes internally pre-matched input and output, integrated input power detector, and 1,000 V Class 1C ESD protection.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Microwave Amplifiers | Wireless Amplifiers | Bipolar Amplifiers

Integrated Front End is optimized for Zigbee® modules.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 04 Oct 2007 07:58:33 -0500

Model RIF211 provides complete front end capability with power amplifier, low-noise amplifier, and antenna switch. It features power amplifier with current draw of 120 mA while transmitting at 20 dBm output. MMIC includes high gain very low noise LNA (LNA Gain = 15 dB, NF less than 1.0 dB), as well biasing circuitry in miniature 16-pin 3 x 3 x 0.5 mm QFN package. Module is fully matched internally to a 50 ohm output and input impedance.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Communication Systems and Equipment

Search for suppliers of: Integrated Circuits (IC) | Power Amplifiers | Low Noise Amplifiers | Microwave Monolithic Integrated Circuit (MMIC) Amplifiers

Millimeter-Wave Amps provide broadband performance.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 31 Jul 2007 07:44:59 -0500

Available in 10 models covering 33-75 GHz bandwidths, LA Series features P1dB input powers as high as +11 dBm, noise figures as low as 7 dB, and gain options from 10-40 dB. Additional performance characteristics include input/output VSWR of 2.2:1 and gain flatness of ±3.0 dB. Suited for EW, ECM, and instrumentation applications, amps offer full range of packaging configurations and RF interface options, including 2.4 and 1.85 mm coaxial configurations.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Communication Systems and Equipment

Search for suppliers of: Broadband Amplifiers

TWT Amplifiers suit high output power applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Dec 2006 08:07:26 -0500

Providing RF power to test and measurement, industrial and university research and development, and service applications, Models 125T18G26 and 125T26G40 deliver 125 W CW power in frequency ranges of 18-26.5 GHz and 26.5-40 GHz respectively. Both TWTs include built-in IEEE-4888 (GPIB) interface, 0 dBm input, VSWR protection, gain control, RF output sample port, auto sleep, monitoring of TWT helix current, cathode voltage, baseplate temperature, and cabinet temperature.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Communication Systems and Equipment

Search for suppliers of: RF Amplifiers | Microwave Amplifiers | Traveling Wave Tube Amplifiers

Ultra-Low Noise Amplifiers cover microwave frequency bands.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 27 Nov 2006 07:46:48 -0500

Offered in 20+ models, ultra-low noise JCA Amplifiers can be employed in narrowband situations, such as GPS receiver, or in electronic surveillance system where several octaves of bandwidth may be necessary. Narrowband models can be optimized for sub 0.5 dB noise figures over 100-200 MHz sub-bands, and broadband multi-octave noise figure performance is rated under 1 dB max for C-Band frequencies and below. Design minimizes touch-and-tune time.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Communication Systems and Equipment

Search for suppliers of: Wideband Amplifiers | Narrow Band Amplifiers | Low Noise Amplifiers | Microwave Amplifiers

Power Amplifier suits 802.16 WiMAX Base Station applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 18 Oct 2006 07:50:18 -0500

Model ZPA3436-5W amplifier operates over 3.4-3.6 GHz band with typical gain of 46 dB and 37 dBm OFDM output power for 64 QAM, 3/4 Coding, 3.5 MHz channel bandwidth, and 256 carriers. Biased at 28 V, high linearity power amplifier achieves EVM performance of 2% at 37 dBm linear output power, and draws 3.5 A dc current. Design is lead free and SMA connectorized package measures 9 x 4 x 1.5 in. without external heat sink.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Communication Systems and Equipment

Search for suppliers of: High Power Amplifiers

TWT Amplifier operates in 4.2-18 GHz frequency band.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 13 Oct 2006 07:39:22 -0500

Delivering 40 W of power, Model 40T4G18 Traveling Wave Tube Amplifier (TWT) is designed for applications where low harmonic content is required in sub-band ranges and where wide instantaneous bandwidth, high gain, and moderate power output are required. Features include built-in IEEE-4888 (GPIB) interface, 0 dBm input, VSWR protection, gain control, RF output sample port, auto sleep, plus monitoring of TWT helix current.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Communication Systems and Equipment

Search for suppliers of: Power Amplifiers | RF Amplifiers | Traveling Wave Tube Amplifiers

Power Amplifiers are designed for 0.8-18 GHz frequency range.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 06 Oct 2006 07:46:10 -0500

Hybrid traveling wave tube (TWT) amplifier Model 35ST1G18 delivers 35 W minimum at amplifier output connector with low harmonics, while Model 50ST1G18 provides 50 W minimum. Both solid state amplifiers are are 100% VSWR tolerant include built-in IEEE-4888 interface, 0 dBm input, gain control, RF output sample port, plus monitoring of TWT helix current, cathode voltage, collector voltage, heater current, heater voltage, baseplate temperature, and cabinet temperature.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Communication Systems and Equipment

Search for suppliers of: High Power Amplifiers | Hybrid Amplifiers | RF Power Amplifiers | Traveling Wave Tube Amplifiers | Broadband Amplifiers | Microwave Amplifiers

Wideband Amplifiers are designed for microwave applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 21 Aug 2006 07:51:10 -0500

Providing alternative to distributed amplifiers for applications requiring frequencies extending through X and Ku bands, SUF series E-Mode pHEMT wideband amplifiers operate directly off single +3.3 or +5.0 V supply voltage, and employ 50 <font face='Symbol'>W</font> broadband match. MMIC Darlington amplifiers include 5 models, SUF-1000 to SUF 5000, offering from DC-20 GHz to 0.10-10 GHz and 10-19 dB of gain.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Microwave Monolithic Integrated Circuit (MMIC) Amplifiers | Wideband Amplifiers

TWTAs suit microwave testing applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 03 Aug 2006 08:32:25 -0500

Custom Traveling Wave Tube Amplifiers (TWTAs) fit in standard 19 in. rack and deliver up to 1,000 W power. Amplifier line includes Model 511, which delivers 1,000 W/2.5-7.5 GHz, Model 512 with 500 W/7.5-18 GHz, and Model 513 with 1,000 W/1-2.5 GHz.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Communication Systems and Equipment

Search for suppliers of: Traveling Wave Tube Amplifiers

TWT Amplifiers are offered in three 1,500 W models.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Jul 2005 07:58:01 -0500

Traveling wave tube (TWT) amps provide RF power for various applications in test and measurement, research and development, and service applications. With modular construction, self-contained, forced air-cooled broadband TWT amps are equipped with front panel digital displays that show forward and reflected output. Models 1500T1G3A, 1500T2G8A, and 1500T8G18 cover respective frequency ranges of 1-2.5, 2.5-7.5, and 7.5-18 GHz.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Traveling Wave Tube Amplifiers

Dual Band TWT Microwave Amp simulates 600 V/m radar pulse.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 25 Oct 2004 07:43:01 -0500

Model 750TP1G3/200T provides RF power to simulate 600 V/m radar pulse requirement of GM 3097 and Ford ES-XW7T-1A278-AC automotive specifications. It can also provide 200 W CW power to satisfy requirements of both standards to achieve 70 V/m over 1-2 GHz frequency range. This 750/500 W pulse amplifier, suited for pulse applications at low to moderate duty factors, covers 1.15-1.45 and 2.7-3.1 GHz frequency ranges.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Microwave Amplifiers | Traveling Wave Tube Amplifiers

Current-Feedback Amplifier suits wireless communications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 16 Jan 2004 07:55:40 -0500

Housed in SO-8 and SOT23-6 packages, OPA695 IF amplifier is capable of single supply, +5 to +12 V operation. At G = +8, unit offers 4,300 V/µsec slew rate and greater than 450 MHz bandwidth. At G = +2, it offers 1.4 GHz bandwidth with 2,500 V/µ sec slew rate. Unit, specified over commercial and industrial temperature ranges, has 12.9 mA supply current and optional disable control pin and suits applications from video signal processing to wireless communications.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Current & Voltage Amplifiers | Intermediate Frequency (IF) Amplifiers

Traveling Wave Tube Amplifiers deliver up to 300 W.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 02 Jul 2003 07:35:22 -0500

Model 300T2G8, ranging from 2.5-7.5 GHz, provides 300 W minimum at amplifier output connector. Model 250T1G3, ranging from 1-2.5 GHz, and Model 250T8G18, ranging from 7.5-18 GHz, each deliver 250 W. All are self-contained, forced air-cooled broadband TWTAs suitable for applications that require instantaneous bandwidth and high gain. They provide power needed to ensure desired 200 V/m level for EMC testing. Modular design allows access for repair and maintenance.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Traveling Wave Tube Amplifiers

Microwave Amplifier provides low harmonic content.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 12 Nov 2002 09:08:07 -0500

Model 10ST1G18 broadband hybrid solid state and traveling wave tube microwave amplifier delivers 10 W minimum at amplifier output connector. Instantaneous frequency range is from 0.8-18 GHz in 4 sub-bands. Self-contained, air-cooled unit has built-in IEEE-488 interface, 0 dBm input, gain control, RF output sample port, and VSWR protection for TWT. It provides monitoring of TWT helix current, heater voltage, baseplate temperature, and cabinet temperature.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Microwave Amplifiers | Broadband Amplifiers