ThomasNet Industrial Newsroom -

Instrument provides photovoltaic cell measurements.

info@productnews.com (ThomasNet News) — Thu, 22 Oct 2009 08:41:09 -0500

With novel detector geometry that splits beam, Oriel IQE-200(TM) permits simultaneous measurements of external quantum efficiency and internal quantum efficiency of solar cells, detectors, or any photon-to-charge converting devices. Instrument combines light source, monochromator, advanced sensor technology, electronics, and software. Oriel QE Commander(TM) software, pre-loaded on PC, controls all components and accessories, providing simultaneous, real-time readout of EQE and IQE.

This story is related to the following:
Optics and Photonics
Test and Measuring Instruments
Green & Clean

Search for suppliers of: Beamsplitters | Solar Simulators | Measuring Instruments

Dichroic Beamsplitters suit image-splitting applications.

info@productnews.com (ThomasNet News) — Fri, 05 Jun 2009 08:33:39 -0500

Targeted for high-speed and simultaneous multi-color imaging techniques, hard-coated dichroic beamsplitters can handle both transmitted and reflected light when separating beams of light by wavelength for simultaneous capture of multiple images. Filters are available in 25 x 36 mm rectangular size to fit most microscopes. Anti-reflection coating on backside provides transmission typically exceeding 95% average and minimizes artifacts from multiple reflections.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Dichroic Filters | Beamsplitters

Beam Splitter/Combiner operates at either 1,310 or 1,550 nm.

info@productnews.com (ThomasNet News) — Fri, 12 Sep 2008 07:36:27 -0500

Nanofabricated directly on thin glass substrates using proprietary processes, polarizing beam splitter/combiners offer extinction ratio of transmission channel greater than 30 dB and reflection channel greater than 25 dB. They can be produced on BK7, SBL7, or similar substrates with thicknesses ranging from 0.2-1.6 mm and sizes from 0.5 x 0.5 to 15 x 15 mm. Featuring operating range of -40 to 80°C, units are suited for telecom and scientific equipment such as Raman amplifiers.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Combiners | Beamsplitters

Polarizing Cube Beamsplitters feature 500:1 extinction ratio.

info@productnews.com (ThomasNet News) — Tue, 24 Jun 2008 07:35:49 -0500

TECHSPEC® Broadband Polarizing Cube Beamsplitters split randomly polarized beams into 2 orthogonal, linearly polarized components. Suited for variety of broadband applications, they offer transmission of greater than 90% for P-polarized light and 90° angle of reflection for S-polarized light across entire wavelength range. Beamsplitters are available in sizes of 5, 10, 20, and 25 mm in both VIS (420-680 nm) and NIR (700-1100 nm) versions.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Beamsplitter Cubes

Beamsplitter offers polarization control.

info@productnews.com (ThomasNet News) — Fri, 08 Feb 2008 07:55:48 -0500

Optimized for Second Harmonic Generation microscopy, Short-Wave-Pass Dichroic Beamsplitter suits multiphoton fluorescence imaging using femtosecond NIR laser. Filter has low group delay dispersion for minimized pulse broadening to allow deep sample penetration; 100 fs laser pulse broadens by less than 1% after reflection off filter. With controlled polarization dependence, unit maintains linear polarization for reflected laser light and transmitted signal light.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Dichroic Filters

Beamsplitters suit space-constrained applications.

info@productnews.com (ThomasNet News) — Wed, 29 Aug 2007 07:42:27 -0500

Featuring multilayer anti-reflection coating to minimize back reflections, TECHSPEC(TM) Elliptical Plate Beamsplitters are available in 1.0 mm thick model for ultra-tight spaces or 3.0 mm thick version with surface accuracy of ¼ wave. When beamsplitters are oriented at 45° in optical path, they create circular aperture equal to diameter of minor axis.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Beamsplitters

Laser Dichroic Filters operate at 45 degrees.

info@productnews.com (ThomasNet News) — Wed, 13 Jun 2007 07:31:43 -0500

Made with Ion Beam Sputtering, RazorEdge® Dichroic(TM) Beamsplitters reflect standard laser wavelength incident at 45° while passing broad band of longer Raman-shifted wavelengths. Units guarantee transition from laser line to passband in less than 1% of laser wavelength, regardless of polarization. With dense, hard dielectric optical coating, filters offer high damage threshold and permanent performance, even in harsh, humid environments.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Dichroic Filters

Variable Attenuator/Beamsplitter can be mounted on any post.

info@productnews.com (ThomasNet News) — Wed, 22 Nov 2006 07:43:58 -0500

Designed to work with lasers at variety of wavelengths, Variable Attenuator/Beamsplitter can be used as beamsplitter in holography and precision interferometry applications and as attenuator for general laboratory applications. It divides incident polarized light beam into 2 beams by 90° and intensity ratio of beams can be continuously varied by rotating input half-wave plate. Polarizing beamsplitting cube is built in with 532, 632.8, 800, and 1,064 nm wavelength options.

This story is related to the following:
Controls and Controllers
Electronic Components and Devices
Optics and Photonics

Search for suppliers of: Laser Beam Delivery Systems | Variable Attenuators

Cube Beamsplitters suit 532 or 1064 nm Nd:YAG lasers.

info@productnews.com (ThomasNet News) — Tue, 09 May 2006 08:08:02 -0500

TECH SPEC(TM) High-Energy Polarizing Cube Beamsplitters handle laser-power densities up to 5 J/cm² and use multilayer dielectric film technology to minimize reflection and absorption losses. Units offer extinction ratio of > 500:1. Precision fused silica substrate and optical contact bonding prevents need for adhesive between prisms and improves parallelism of incoming and exiting beams. V-coat AR coating at design wavelength eliminates energy loss.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Laser Accessories

Variable Attenuator and Beam Splitter mounts on CCD camera.

info@productnews.com (ThomasNet News) — Tue, 18 Jan 2005 07:51:27 -0500

Designed for BeamStar FX Beam Profiler CCD cameras, variable attenuator option provides control over 4 orders of magnitude between 350â�"1100 nm wavelengths and suits pulsed lasers. BeamStar FX series beam splitters include UV grade fused silica wedge beam splitter that fits onto camera and another splitter that stands alone on its own adjustable stand. Each splitter reduces laser beam intensity by approximately 20 times.

This story is related to the following:
Controls and Controllers
Optics and Photonics

Search for suppliers of: Beamsplitters

Beamsplitters feature multi-layer, anti-reflection coating.

info@productnews.com (ThomasNet News) — Thu, 05 Jun 2003 07:41:30 -0500

Elliptical-shaped Plate Beamsplitters fit into circular apertures when oriented or mounted at 45°. They have 50% transmission/50% reflection ratio and are offered for visible spectrum and near-infrared in variety of sizes. Surface accuracy of ¼ wave reduces scatter and makes them suitable for imaging applications requiring diffuse axial or in-line illumination sources.

This story is related to the following:
Optics and Photonics

External Beam Splitter can control up to 6 workstations.

info@productnews.com (ThomasNet News) — Wed, 31 Jul 2002 08:09:06 -0500

FS Series External Beam Splitter is suited for use with company's line of pulsed Nd:YAG welding lasers. It splits one laser output into two or three balanced energy-shared outputs and allows one time-shared laser welder to operate up to six workstations. CDRH compliant, beam splitter includes safety interlocks and direct I/O interfacing of individual process shutters (with open/close confirmation signals) on each output.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Beamsplitters

Confocal Microscope is programmable.

info@productnews.com (ThomasNet News) — Wed, 17 Apr 2002 07:43:54 -0500

TCS SP2 AOBS (Acousto-Optical Beam Splitter) adapts from single- to multi-chromatic characteristics of any type providing spectral imaging and measurement environment for multi-fluorescent samples. Compared with conventional beam splitter equipped confocals, TCS SP2 AOBS provides automatic adjustment to selected laser lines, greater transparency, sharper wavelength selection, rapid wavelength switching, and precision for FRET measurements.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Microscopes | Beamsplitters | Fluorescence Microscopes