ThomasNet Industrial Newsroom -

CCD-Based Laser Beam Profiler delivers 12-bit resolution.

info@productnews.com (ThomasNet News) — Fri, 25 Sep 2009 08:36:16 -0500

Operating under BeamProfiler Software in MS Windows®, USBeamPro CCD provides NIST-traceable measurements of ISO Standard laser beam profile parameters - laser beam diameter, centroid, power/energy - for CW, pulsed, and single-shot lasers. USB 2.0 interface facilitates use and promotes portability, while ½ in. format 1,360 x 1,024 array with 4.65 µm square pixels offers total imaging area of 6.32 x 4.76 mm. Camera dimensions (70 x 95 x 33 mm) aid placement into typical optical paths.

This story is related to the following:
Machinery and Machining Tools
Optics and Photonics

Search for suppliers of: Beam Profilers

Portable Beam Profiler works with high-power CO2 lasers.

info@productnews.com (ThomasNet News) — Tue, 21 Apr 2009 08:27:21 -0500

Designed to verify performance and reduce changeover time for industrial parts manufacturers, ModeCheck(TM) enables quantitative measurement and viewing of high-power CW and pulsed lasers in 8-30 µm range with intensities up to 30 W/cm². Industrial solution measures key characteristics of laser beam profile in real-time and stores mode images for later recall and comparison. Over time, user will be able to measure laser degradation and predict and schedule downtime for maintenance.

This story is related to the following:
Machinery and Machining Tools
Optics and Photonics

Search for suppliers of: Beam Profilers

Laser Beam Profiling Cameras cover UV and IR spectral range.

info@productnews.com (ThomasNet News) — Fri, 12 Dec 2008 07:40:42 -0500

Operating over 190-355 nm spectral range, LaserCam-HR-UV records beam characteristics at third (355 nm), fourth (266 nm), and fifth (213 nm) harmonics of Nd:YAG lasers, as well as output of most excimer lasers. LaserCam-HR-InGaAs measures infrared laser beams from 900-1,700 nm, and is compatible with eye safe military lasers, telecom sources, and Nd:YAG fundamental. Both units are powered through single BeamView(TM)-USB 2.0 cable connection.

This story is related to the following:
Machinery and Machining Tools
Optics and Photonics

Search for suppliers of: Beam Profilers

Laser Beam Profiler offers Hi-Res, 3.1 fps frame rates.

info@productnews.com (ThomasNet News) — Mon, 28 Jul 2008 07:52:28 -0500

Supplied with LBA beam analysis software, USB L11058 Large Format Beam Profiling Camera has 4,008 x 2,672 pixel format that allows profiling of UV laser beams up to 24 x 36 mm without requiring reduction optics. It measures CW laser beams over 190-1,100 nm spectral range and has wide dynamic range of 59 dB. While global shutter allows simultaneous integration of entire pixel array, integrated USB 2.0 digital interface allows data transfer to laptop/desktop PCs.

This story is related to the following:
Machinery and Machining Tools
Optics and Photonics

Search for suppliers of: Beam Profilers

Beam Propagation Analyzer measures 10 x 7 x 17 in.

info@productnews.com (ThomasNet News) — Fri, 27 Jul 2007 08:05:40 -0500

Model M2-200S Beam Propagation Analyzer features UV operation between 250-370 nm, visible operation from 400-700 nm, and NIR operations from 650-1,100 nm (1,064 nm YAG) and 1,000-1,800 nm (1,064 nm YAG plus telecom). All measurements and translations as well as incremental beam attenuation are automatically controlled by M2-200S software. ISO compliant unit comes in M2x, M2y, Ky, Ky, BPPy, BPPy, width at waist Wy, Wy, and waist location at Zy, Zy.

This story is related to the following:
Machinery and Machining Tools
Optics and Photonics
Test and Measuring Instruments

Search for suppliers of: Image Analyzers | Laser Beam Analyzers | Beam Profilers

Beam Profilers use software to report measurements.

info@productnews.com (ThomasNet News) — Thu, 25 Aug 2005 09:42:12 -0500

BeamStar FX Beam Profiler Systems include camera, filters, plug-and-play PC card, and version 1.10 software. Users can align Major/Minor axes instead of X and Y for beam shapes not aligned to X and Y. With Point-to-Point Distance Measurement, users can right click mouse and move, then right click again to measure distance between any 2 points. Additional features include M² measurement capabilities, 2D Gaussian Fit, and Region of Interest capabilities.

This story is related to the following:
Machinery and Machining Tools
Optics and Photonics

Search for suppliers of: Beam Profilers

Camera System comes with attenuators and beam splitter.

info@productnews.com (ThomasNet News) — Tue, 18 Jan 2005 07:51:22 -0500

BeamStar FX Beam Profiler CCD Camera is available with variable attenuator option that provides control over 4 orders of magnitude from 350â�"1,100 nm wavelengths. Attenuation is variable from microwatts to watts. Beam splitters include UV grade fused silica wedge beam splitter that fits onto camera and another splitter that stands alone on adjustable stand. Latter allows camera operation up to 2 W, while former allows operation up to 40 W.

This story is related to the following:
Machinery and Machining Tools
Optics and Photonics
Vision Systems

Search for suppliers of: CCD Cameras | Beam Profilers

Laser Beam Profilers use FireWire® cameras.

info@productnews.com (ThomasNet News) — Thu, 09 Dec 2004 07:45:21 -0500

LBA-FW profilers utilize 12- or 14-bit digital FireWire cameras that connect directly to laptop computers without frame grabber card, providing portable beam analysis instrument. Megapixel CCD and pyroelectric cameras are provided to cover spectral range from UV to far IR. Multiple FireWire cameras can operate on one FireWire bus, enabling multiple, simultaneous laser beam profilers. Cameras capture CW and pulsed lasers beams.

This story is related to the following:
Machinery and Machining Tools
Optics and Photonics

Search for suppliers of: Beam Profilers

CCD Laser Beam Profilers have firewire interface.

info@productnews.com (ThomasNet News) — Thu, 06 May 2004 07:42:46 -0500

Digital BeamStar FX Series works with laptop or desktop PCs to provide everything necessary for beam profiles of pulsed and CW lasers from µW to W. System consists of camera, filters, laptop or PC card, and software. Trigger input lets BeamStar FX 33 and FX 50 synchronize with trigger output from pulsed laser. Series features automatic gain and exposure adjustment as well as automatic photodiode synchronization with pulsed lasers.

This story is related to the following:
Machinery and Machining Tools
Optics and Photonics

Search for suppliers of: Beam Profilers

Laser Beam Profiler allows users to adjust laser at will.

info@productnews.com (ThomasNet News) — Thu, 10 Jul 2003 07:46:07 -0500

Designed to measure beam profile and power of pulsed industrial Nd:YAG and Diode industrial lasers, BA100 displays laser beam intensity profile in real time. Instrument makes measurements at full or near full power levels (1,000 W max) and is useful for looking at focal spots. Beam profile can be shown in 3D form and rotated to different angles and elevations. Unit handles pulse energies to 30 Joules and has beam area of 25.6 x 19.2 mm with 5.7° field of view.

This story is related to the following:
Machinery and Machining Tools
Optics and Photonics

Search for suppliers of: Beam Profilers

Laser Beam Profiler works with laptop or desktop PC.

info@productnews.com (ThomasNet News) — Mon, 09 Jun 2003 07:44:11 -0500

Self-contained BeamStar FX 66 provides measures CW and Pulsed lasers using laptop or desktop personal computer. Connected to PC via one Firewire interface card, product offers software with manual or automatic gain and shutter control adjustments. Laser beam focal point, vertical and horizontal spectral profiles, and beam statistics are displayed on screen. It has aperture of 9.7 x 7.68 nm, 1280 x 1024 pixels, and provides dynamic measurement range of 53 dB.

This story is related to the following:
Machinery and Machining Tools
Optics and Photonics

Search for suppliers of: Beam Profilers

Profiler utilizes Windows-based operating software.

info@productnews.com (ThomasNet News) — Mon, 17 Dec 2001 08:04:42 -0500

WinCamD 3-dimensional beam intensity profiler features 4.65 µm square pixel size and 14-bit analog-to-digital converter that gives it greater than 16,000 levels of intensity resolution. WinCamD includes pass/fail settings for beam width, relative power, Gaussian and top hat fit, and data logging. It can be used for pulsed (as low as 1 Hz) or continuous-wave beams. Use of variable electronic shutter provides dynamic range of 60,000:1.

This story is related to the following:
Machinery and Machining Tools
Optics and Photonics

Search for suppliers of: Beam Profilers