ThomasNet Industrial Newsroom -

Damping Hinges are adaptable for numerous applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 11 Aug 2008 07:46:09 -0500

Targeting laptop computer, medical, aerospace, automotive, and other industries, Aluminum Damping Hinges can be used on applications where lid or panel needs to close with slow motion action. Corrosion resistant hinges allow for customization by adjusting length and diameter of shaft, making them adaptable to any size and weight application. Life cycles can exceed 35,000 uses, and spring can be added for quick release.

This story is related to the following:
Transportation Industry Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Mounting and Attaching Products

Search for suppliers of: Friction Hinges | Laptop Computer Hinges | Automotive Hinges | Aircraft Hinges | Corrosion Resistant Hinges | Aluminum Hinges

Steel Cube creates structures in laser-based applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 07 Aug 2008 07:46:41 -0500

Constructed of all-stainless steel, PS-Q Pedestal Post Cube lets researchers mount PS Series Pedestal and Extension posts at 90° angle and create stable, multidimensional structures. Cubes are stacked and aligned onto posts using PS-Q-A thread adaptor that fits into either of 2 counterbores on cube. Thread adaptor enables cube to be rotated to same orientation as any of cubes below it while also providing threaded hole on top of cube for further stacking of posts or other cubes.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Mounting and Attaching Products

Search for suppliers of: Laser Accessories | Pedestals

Aluminum Continuous Hinges are corrosion resistant.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 28 Jul 2008 08:03:07 -0500

AL Series aluminum hinges are made of 3003 Series alloy and come in various widths in .040, .050 and .060 in. leaf thicknesses with .50 in. knuckles. Soft properties of alloy make it suitable for hinges being machined or put through secondary processes.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Continuous Hinges | Aluminum Hinges | Hinges | Corrosion Resistant Hinges

Accelerometer Magnet Bases offer high pull strength.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 25 Jul 2008 08:47:29 -0500

Featuring 7/8 in. diameter, 2-pole Model B12 provides 20 lb of force, while 2-pole Model B13, measuring 1 in. in diameter, delivers 35 lb of force. Units are suited for walk-around data collection since attaching base allows vibration sensor to be moved from point to point. Bases have ¼-28 tapped hole that can accommodate variety of threaded stud adapter sizes such as M6, M8, 3/8, and 10-32 for compatibility with most industrial accelerometers.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Magnetic Bases

Clevis Hanger suspends mechanical piping systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 25 Jul 2008 08:47:27 -0500

Available in 6 carbon steel models, Figure 1U Ultra Clevis Hanager features snap-open/snap-close design and accommodates pipe sizes ranging from ½-4 in. Clevis bottom locks in place to prevent swinging while it supports pipe's weight when hanger is in open position. Flared edges facilitate installation for all pipe types and protect CPVC pipe from abrasion.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Mounting and Attaching Products

Search for suppliers of: Clevises | Pipe Hangers

Isolator Mounting Bases isolate sensors up to 1,500 V.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 23 Jul 2008 08:49:34 -0500

Measuring 1 in. across flats with 0.82 mounting pad, Models SF21 and SF22 accommodate up to medium diameter accelerometers and small diameter side-exit accelerometers. Models SF23 and SF24 are both 1 1/8 in. across flats with 0.94 in. mounting pad that can accommodate large diameter top-exit sensors. All have ¼-28 integral stud on accelerometer side, and are used to prevent voltage spikes from reaching sensor by electrically isolating it from case of machine.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices Sponsored by: Lumera Corporation -
Mounting and Attaching Products

Search for suppliers of: Isolators | Electric Signal Isolators | Bases

Mold Base is available in 70 sizes.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 Jul 2008 07:44:02 -0500

D-M-E Edge is full-featured mold base line with 70 sizes available. Full range of features include No. 3 EZ machine steel; guided ejection; 4 pry bar slots and lift holes installed; relocated return pins; vented leader pins; and 3-piece housing.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Mold Bases

Cable Support System features blue and red J hooks.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Jul 2008 07:41:42 -0500

With blue and red color options, J-PRO(TM) Cable Support System lets users segregate and identify cable bundles for specific applications such as data, security, fire alarm, or other applications that require designated pathway. It also prevents cables from coming in contact with metal and provides complete bend radius control to help ensure cable performance.

This story is related to the following:
Mounting and Attaching Products
Material Handling and Storage

Search for suppliers of: Cable Hooks | Jack Hooks | Cable Clamps

Duct Hangers give large fabric duct inflated appearance.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 11 Jul 2008 07:37:43 -0500

Designed for larger fabric ductwork diameters in open architecture ceilings, 4x2 Suspension System(TM) simulates aesthetic inflated appearance even when heating/cooling air handlers are idle. Dual tension cables support duct clasps at 11 and 1 o'clock positions, while sculpted aluminum brackets support 10 and 2 o'clock positions with D-ring clips. Hanger system supports 50-60 in. dia DuctSox®, and factory-sewn D-clasps snap into ends of bracket to accelerate installation.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Hangers | Industrial Hangers

Heavy Tool Tether holds tools weighing up to 15 lb.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Jun 2008 07:42:44 -0500

Designed to both utilize and protect heavy tools, Gear Keeper Personal Heavy Tool Tether(TM) features ½ in. super coil and two 500 kg load-bearing carabiners. Unit is suitable for use in all kinds of weather and rough environments. Enclosed in nylon webbing for added strength, coil has retracted length of 21 in. and can extend up to 42 in. Low-profile coil system minimizes possibility of entanglement.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Coiled Tethers

Spun Pin Hinges are available in aluminum.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 04 Jun 2008 07:40:39 -0500

Suited for service in institutional, marine, and OEM applications, square aluminum butt hinges have non-removable stainless steel pin spun on both ends with no holes and no finish. Heavy-duty products, built to ANSI standards, can be designed using Guden standard templates or end-user-supplied specifications. They comply with RoHS regulations and can be used on doors, furniture, lockers, shipping cases, trunks, and more.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Truck Hinges | Special Hinges | Pivot Hinges | Marine Hinges | Locker Hinges | Door Hinges | Custom Hinges | Butt Hinges | Aluminum Hinges | Institutional Hinges | Heavy Duty Hinges

Rubber Push-In Style Bumpers protect through holes.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 29 May 2008 07:40:25 -0500

Available in sizes to handle .118-.500 in. mounting hole diameters, Rubber Push-In Bumpers can be used on panel thicknesses from .098-.188 in. and come in range of different shapes to suit varying application requirements. Products are constructed of black SBR and fit snugly into mounting holes so that air or water cannot pass through. Operating temperature range is -40 to +221°F, and additional applications include use as feet.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Rubber Bumpers | Rubber Feet

Pegboard mounts vertically or horizontally.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 14 May 2008 07:48:36 -0500

Available in 3 standard sizes of 32 x 24, 24 x 24, and 24 x 8 in., Peg-Panel(TM) can be purchased in 100% molded plastic panel format for DIYers, or as finished peg-panel display. Unit features blank header for graphic placement and accepts all standard pegboard hardware. Measuring 1/8 in. thick, panel has ¼ in. diameter holes, 1 in. on center. Moisture-resistant board is virtually maintenance-free and will not chip, warp, break, rust, or absorb dirt or grease.

This story is related to the following:
Mounting and Attaching Products
Display and Presentation Equipment

Search for suppliers of: Pegboard | Display Components

Leg Leveling Foot stabilizes appliances on uneven surfaces.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 May 2008 07:33:33 -0500

LLF Series allows manual leveling by turning foot under weight of appliance, with maximum load per foot of 56.2 lb. Part is co-molded with 2 engineered thermoplastic materials: Polypropylene base for durable contact with floor and Thermoplastic Elastomer foot providing vibration control and noise isolation. It also includes RoHS-compliant 18-8/A2 SS hardware which meets/exceeds ASTM, DIN, and ANSI/ASME standards.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Plastic Feet | Machine Levelers

Concealed Hinges attach to doors with 25 mm return flange.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Apr 2008 07:44:23 -0500

Installed by welding, mechanical attachment, or both, concealed heavy-duty hinges feature hinge pin that slides for door removal, but remains attached to enclosure using acetal circlip. They are available in mild steel version, with door part phosphatized for corrosion protection while also providing surface for powder coating. For outdoor applications in corrosive environments, on NEMA 4X or GR 487 boxes, stainless steel version is available.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Steel Hinges | Stainless Steel Hinges | Door Hinges | Concealed Hinges | Heavy Duty Hinges | Enclosure Hinges

Continuous Hinge Series meets military specifications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Apr 2008 07:54:53 -0500

Supplied with holes and cut to length as required, MS35000 series stainless steel piano hinges can serve marine, military, and shipboard applications. They are available in stock lengths or can be supplied to end-user requirements. Able to survive harsh environment and outdoor exposure, these RoHS-compliant hinges can be customized for any design engineering project. Also available is US Navy locker hardware manufactured to BuShips drawing number S-3200-860055.

This story is related to the following:
Mounting and Attaching Products
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Continuous Hinges | Piano Hinges | Stainless Steel Hinges

Aluminum Profile has satin anodized finish for 3/4 in. panels.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 26 Mar 2008 07:45:54 -0500

Suited for shelving, wall panels, and countertop trim, bull nose profile #6003 provides decorative edge treatment for ¾ in. thick panels, enhancing panel appearance and reducing wear and tear to any panel edge. It is available in standard 96 in. length, and can also be supplied cut to custom sizes. Designed to address display and fixture requirements, profile can be used with variety of panel types including MDF, particleboard, plywood, rigid plastic foam, and others.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Aluminum Profiles

Hinge Interlock Switches safeguard hazards.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 26 Mar 2008 07:45:49 -0500

Used in place of standard hinges on swinging guards, gates, or doors, SI-HG63 Series Hinge Safety Interlock Switches offer 2 NC safety contacts and one NO auxiliary contact. NC safety contacts, when activated, interrupt electrical circuit and send stop signal to machine control. Rated IEC IP67, switches withstand harsh plant environments and have safety switching point adjustable ±1.5° throughout full 0-270° range of motion. Each hinge can support axial and radial load of 1,200 N.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mounting and Attaching Products

Search for suppliers of: Interlock Safety Switches | Hinges

Hanger/Restrainer eases sprinkler pipe installation.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 11 Feb 2008 07:41:52 -0500

Designed for plastic fire sprinkler pipe, Figure 29 CPVC Hanger and Restrainer eliminates need for wood block extension and allows retrofit attachment of hanger to sprinkler pipe. Product attaches to wood structures with two No. 10 x 1 screws and provides double offset 1½ x 1½ in. from mounting surface. Available for ¾ in. and 1 in. pipe sizes, Figure 29 meets and exceeds requirements for NFPA 13, 13R, and 13D.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Pipe Hangers

Concealed, Removable Hinges promotes access versatility.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Feb 2008 07:44:45 -0500

Corrosion-resistant F6 hinges feature concealed mounting and enable tool-free door removal to facilitate access to interior of equipment or enclosures. All-metal designs promote strength and durability for enclosures and industrial equipment, and concealed hinge installation protects against vandalism. Available in zinc-plated steel, 300-series stainless steel, and engineered plastic materials in sizes from 0.87-5.91 in. long, hinges are available with dual hinge points for stability.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Concealed Hinges | Spring Hinges