ThomasNet Industrial Newsroom -

TV Wall Mount offers 360° adjustment capability.

info@productnews.com (ThomasNet News) — Mon, 14 Sep 2009 08:32:09 -0500

Accommodating flat-panel TVs from 12-40 in. and up to 25 kg, Telehook TH-1040-VFM offers full range of movement via 3 pivot points, including ball joint for infinite TV adjustment for any viewing angle up to 40°. Even after screen has been installed, it is possible to change position from landscape to portrait mode with 360° adjustment capability. Simple Tension adjustment feature lets users make viewing angle tweaks with just 1 turn to fix or loosen tension.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Wall Mounts | Television Set Mounts

Steel Leveling Sets come with spherical washers.

info@productnews.com (ThomasNet News) — Wed, 09 Sep 2009 08:35:58 -0500

Offered in metric sizes, RoHS compliant series GN 350.2 sets are made of zinc-plated, blue passivated steel for leveling, adjusting, and linking operations. They consist of threaded upper sleeve and tapped lower sleeve and have spherical washer for precise installation of 2 non-parallel planes at required gradient up to -4°. Fine thread allows stepless setting and locking using DIN 1810A hook spanner wrench, while anti-rotation disk serves as height limiter for maximum height.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Machine Levelers | Leveling Mounts

Plate helps offload non-flowing material from trailers.

info@productnews.com (ThomasNet News) — Thu, 03 Sep 2009 08:37:50 -0500

Constructed of wear-resistant aluminum, Titan Kicker Plate(TM) expedites offloading of non-flowing or compressed material out of trailers, while keeping drivers out of back of trailer. Unit is hinged at top of rear of trailer and kicks compressed bulk material away from walls as it is being offloaded. Plate changes flow of material from falling backward to falling forward, ensuring material is unloaded cleanly and with minimal operator clean-up.

This story is related to the following:
Architectural and Civil Engineering Products
Mounting and Attaching Products

Search for suppliers of: Kick Plates | Aluminum Plates

Camera Mount attaches anywhere using single suction cup.

info@productnews.com (ThomasNet News) — Thu, 06 Aug 2009 08:28:41 -0500

Fat Gecko Mini attaches on almost any surface and features universal ¼ x 20 in. tripod mounting screw to accommodate any standard camera or camcorder weighing up to 4 lb. Removable single suction cup mount features adjustable knuckle and 3 in. extender allowing for 360° tilt, turn, and rotation. Featuring ruggedized lightweight construction, mount is resistant to salt/fresh water, snow, dirt, sand, and mud.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Camera Mounts

Tool Arm helps maneuver payloads under 10 lb.

info@productnews.com (ThomasNet News) — Fri, 31 Jul 2009 08:29:38 -0500

Model zeroG² simplifies maneuvering of tools, parts, and materials by giving operator freedom of motion. Avoiding harmful effects of fatigue caused by handling tools or other objects for long periods of time, or in awkward positions, it enables workers to operate with efficiency and control and with minimal risk of injury. It is suited for use with industrial tools such as right angle drills, palm sanders, small rivet guns, and grinders.

This story is related to the following:
Mounting and Attaching Products
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!

Search for suppliers of: Tooling Mounting Systems | Parts Handling Equipment | Ergonomic Products | Mounts

Fan/Fixture Mount Kits feature heavy-duty design.

info@productnews.com (ThomasNet News) — Mon, 27 Jul 2009 08:30:20 -0500

Part of CADDY® line, single-brace Model 512HDFM35 can support up to 35 lb for fans and 50 lb for fixtures, while double-brace Model 512HDFM70 can support up to 70 lb for fans and 90 lb for fixtures. Kits include 2 Fixture Mount Stabilizer Clips and CADDY® SPEED LINK universal support system, which meets requirements of NEC®. Measuring 2 1/8 in., electrical box is pre-mounted in center of brace and features open knockouts. Installed box position is fully adjustable over 16 in.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Mounting and Attaching Products

Search for suppliers of: Fastening Systems | Mounts | Braces

I-Beam Mounting Kit aids safe hose reel installation.

info@productnews.com (ThomasNet News) — Fri, 24 Jul 2009 08:30:05 -0500

Offered as alternative to drilling and welding when securing Series 94000 Hose Reels to I-Beams, Model 85654 facilitates reel location and subsequently reduces installation time. Design allows for perpendicular or parallel mounting to beams and provides performance equal to that of direct fastening. Kit includes I-Beam mounting plate, (2) clamp assemblies, (4) 3/8-16 cup point screws, (4) 3/8-16 jam nuts, (8) 3/8-16 hex cap screws, (8) 3/8" lock washers, and (8) 3/8" hex nuts.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Mounting and Attaching Products

Search for suppliers of: Reel Handling Equipment & Accessories | Mounts | Mountings

C-Mount Camera Coupler provides oversized clear aperture.

info@productnews.com (ThomasNet News) — Wed, 22 Jul 2009 08:30:29 -0500

Intended for microscopes with standard 38 mm ISO photoport, CC-1X provides clear aperture of more than 20 mm that allows use of larger CCD arrays in scientific and industrial imaging cameras. It permits use of video CCD cameras to capture images during research and development, failure analysis, scientific investigation, as well as other microscopy applications. With magnification factor of 1.0X, coupler helps increase field-of-view and light transmission of microscope image to camera.

This story is related to the following:
Optics and Photonics
Mounting and Attaching Products

Search for suppliers of: Microscope Accessories | Camera Mounts

Spring Suspension Mounts target HVAC applications.

info@productnews.com (ThomasNet News) — Fri, 19 Jun 2009 08:27:52 -0500

Designed to isolate suspended products weighing 22-705 lb, V11Z71MKSH Series includes 11 mounts constructed with zinc-plated steel housing. Spring is painted hard drawn steel, and lower plate is neoprene. By having rubber on both ends of coil spring, units can minimize vibrations for wide range of frequencies. Mounts are best suited for hanging fans, distribution pipes, and ducts from ceilings.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Anti-Vibration Mountings | Active Vibration Isolators | Suspension Mounts

Flat Panel TV Mount features discreet design.

info@productnews.com (ThomasNet News) — Wed, 10 Jun 2009 13:53:04 -0500

Constructed with recyclable plastic and minimal steel parts, omnimount enables users to hang flat panel TV in 3 steps. It includes everything needed for installation and accommodates 13-42 in. flat panel TVs that weigh up to 40 lb if mounted on drywall or up to 80 lb if mounted into single stud or masonry. Four wall brackets work with any and all hole patterns on flat panel TVs, and Lift n' Lock(TM) technology aids in attaching flat panel TV to mount and securing it to wall.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Television Set Mounts

Mirror Mount is designed for research and OEM applications.

info@productnews.com (ThomasNet News) — Wed, 03 Jun 2009 08:28:57 -0500

Maintaining standard 1 in. optical axis height, compact V100-CP CenterPoint(TM) mirror mount holds mirror directly above and inline with mounting hole. Clear quadrant mount is English or Metric mounting compatible and can be rotated to steer reflected beam over 270°. In high-density layouts, product can be positioned on adjacent table mounting holes which are only 1 in. apart. Device is utilized in assemblies that require periscopes, delay lines, and polarizer inverters.

This story is related to the following:
Mounting and Attaching Products
Optics and Photonics

Search for suppliers of: Laser Mounts | Optical Mounts

Leveling Mounts adjust to uneven surfaces.

info@productnews.com (ThomasNet News) — Mon, 11 May 2009 08:32:05 -0500

Metric leveling mounts in MVAYNAM and MVAYNFM Series feature rubber foot that swivels 15° to all sides of centerline to adjust to uneven surfaces. Units include jam nut in leveling assembly and antislip isolator pads varying in diameter from 40-80 mm, manufactured from fiberglass-reinforced Polyamide. Mount height ranges from 93-180 mm. Units are suited for use in leveling machine tools and in linear motion and rotary table positioning.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Leveling Mounts

Machinery Mount can adapt to wide variety of equipment.

info@productnews.com (ThomasNet News) — Mon, 20 Apr 2009 08:29:51 -0500

Designed for mounting Laser Microgage Receiver on roll or shaft surface for checking height, profile, or parallelism to other nearby shafts and rolls, Roll Mount has 2 parallel mounting bars that are fully adjustable inwards or outwards to accommodate shafts or roll surfaces of different diameters. Supported on stainless steel post, receiver can be adjusted up or down for placement on many machines, while pair of locking collars allows receiver to be turned on post at fixed height.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Machinery Mounts

Mounting Systems affix black lights to any flat surface.

info@productnews.com (ThomasNet News) — Thu, 19 Mar 2009 08:32:57 -0500

Modular Black Light Mounting Systems include Part No. 623365 Wet Bench Mount, for attaching Magnaflux Black Light to bench unit, modular Part No. 623367 Ceiling Mount to fix light to ceiling of inspection booth or other flat surface, and Part No. 623366 Flat Surface Mount. Mounts can permanently hold black light at specific location to simplify repeatable inspections, and they can be repositioned and adjusted to any angle. Hardware is included, and extensions available.

This story is related to the following:
Test and Measuring Instruments
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mounting and Attaching Products

Search for suppliers of: Inspection Lights | Black Lights | Mountings | Wall Mounts

Tripod Accessory lends to flexible camera use.

info@productnews.com (ThomasNet News) — Thu, 19 Mar 2009 08:32:56 -0500

While providing support on almost any surface, Gorillapod(TM) SLR-ZOOM Ball Head lets users tilt cameras up to 90° and rotate them up to 360°. Aluminum housing and all-metal ball promote durability and smooth movement, and product can be locked into place via indexed adjustment knob. It supports up to 6.6 lb and works with Gorillapod SLR-ZOOM model as well as other tripods. Quick-release bubble level clip can remain attached to camera for instant setup, ensuring level photos.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Camera Tripods | Camera Mounts

Linear Bushings facilitate manual positioning.

info@productnews.com (ThomasNet News) — Wed, 11 Feb 2009 08:28:26 -0500

Available in range of sizes and in single or double versions, LHBBC16 Pillow Block Linear Bushings with Clamp Levers feature slit collar inside that works as clamp and is tightened around shaft as clamp lever rotates. With eco-friendly, self-lubricating design, LHBB-MX16 Pillow Block Linear Bushings extend maintenance intervals making them suited for machines and equipment in difficult-to-reach environments.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Mounting and Attaching Products

Search for suppliers of: Self-Lubricating Bushings | Bushings | Pillow Block Mounts

Mounting Brackets accommodate replacement ladle cups.

info@productnews.com (ThomasNet News) — Tue, 10 Feb 2009 08:32:28 -0500

Featuring universal design that facilitates mounting and tightening, Hanger Brackets are suited for use on Buhler Die Casting machines. Without requiring ladle or hanging bracket modifications, reusable bolt-on design also facilitates cup replacement on left-/right-side applications. They accommodate all Replacement Versa Ladle Cups, in multiple sizes, with capacities from .44-33.70 lb. Brackets are constructed of ¼ in.-thick, ductile iron with contours that promote smooth pouring.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Bracket Hangers | Mounting Brackets | Machinery Mounts

Mounting Plates provide assembly of slides and tables.

info@productnews.com (ThomasNet News) — Wed, 04 Feb 2009 08:33:34 -0500

Provided with through holes on 25, 50, or 100 mm grid, Right Angle Mounting Plates can be used in conjunction with Techno Slides to build XY or XYZ positioning systems. All mounting surfaces are milled flat to 0.05 mm while they are perpendicular to 0.1 mm. Available in 5 sizes with wall thicknesses from 12-15 mm, plates are made of die-cast aluminum, offering thermal conductivity and corrosion resistance. Four sizes can also be fit with optional cover plate.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Mounting and Attaching Products

Search for suppliers of: Mounts | Aluminum Plates | Positioning Slides

Universal Mounting System affixes VPI switch to valve.

info@productnews.com (ThomasNet News) — Fri, 05 Sep 2008 12:16:31 -0500

Made from 316 stainless steel, SMART VPI safely and securely fixes valve position indicator switches onto handwheel-operated valves. Mounting bracket attaches directly onto valve stem without affecting valve itself. Switchbox for valve mounts onto bracket with DIN/ISO configurations; out of the way and not interfering with valve operation, it remains securely fixed in place with protected switches and wiring. Mounting system fits any existing valve and switchbox.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Mounts | Mountings | Mounts | Mountings | Mounts | Mountings

Nylon Base Leveling Mounts swivel 15° and will not separate.

info@productnews.com (ThomasNet News) — Fri, 18 Jul 2008 07:29:28 -0500

Offered in steel and stainless steel, with or without lag holes, tapped-type NY-LEV® nylon base machinery mounts meet leveling and height adjustment needs. They are constructed with tapped socket and swivel 15° in all directions. Due to hex bar stock manufacturing process, hex acts as stop when moving socket beyond its 15° swivel point and ensures socket will not separate from nylon base. Products also feature glass-filled nylon plastic base and non-skid elastomer rubber pad.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Mounting and Attaching Products

Search for suppliers of: Machinery Mounts | Leveling Mounts | Machine Levers