ThomasNet News� -

Single Support Pipe Stands provide seismic and wind restraint.

info@productnews.com (ThomasNet News�) — Mon, 17 Sep 2012 08:33:35 -0400

Stabilizing run of gas or liquid service piping by hard-clamping it to adjustable steel mounting plate, Model KSPS stands meet IBC/OBC/NBCC building code requirements and can used inside structure or on rooftop. Stands are fabricated from engineered steel tube welded to steel base plate that can be welded, bolted, or anchored to building structure. Adjustable, rigid frame maintains pipe at proper height and alignment. Three configurations support and restrain pipe from 1 ¼–5 in.

This story is related to the following:
Mounting and Attaching Products
Material Handling and Storage Sponsored by: Dalmec Inc - The Source for Manipulators and Moving Technologies

Search for suppliers of: Seismic Earthquake Bracing | Pipe Supports | Pipe Stands

Earthquake Restraint System secures optical tables.

info@productnews.com (ThomasNet News�) — Mon, 14 May 2012 08:33:19 -0400

Rated for seismic forces generated by maximum of 2,000 lb of combined table and payload weight, Model ERS2010 restricts motion of pneumatically isolated optical table tops during seismic activity. Minimum of 3 restraints is required to prevent possible tipping, and system does not affect optical table performance. Available in several standard and custom heights, system is certified and in compliance with 2009 International Building Code (IBC) and 2010 California Building Code (CBC).

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Seismic Restraints | Seismic Earthquake Bracing

Battery Isolators eliminate multiple battery drain.

info@productnews.com (ThomasNet News�) — Fri, 11 Feb 2011 08:29:35 -0400

Battery isolators ensure that when vehicles and equipment have 2 batteries, one for starting engine and another for powering accessories, latter does not drain power from former. Suited for transportation and off-road vehicle and equipment applications, products act as check valve between multiple batteries that are set up parallel with each other. No matter how drained accessory battery becomes, isolator ensures there is always enough power to start engine.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Battery Isolators

USB Isolator shields host PC and connected devices from surges.

info@productnews.com (ThomasNet News�) — Tue, 19 Oct 2010 08:33:51 -0400

Inserted in-line with USB connection, industrial-rated USB-Isolator provides 1,500 Vac/2,100 Vdc isolation for USB 2.0 or 1.1 connections from computers to USB devices. Unit protects against over-voltage conditions caused by electrical surges and transient voltage spikes up to 8 kV. LED indicates that power is being received and will blink if connected device tries to draw more than 120 mA. Housed in 1 x 2.5 x 2 in. package, isolator also includes common mode filtering and short circuit protection.

This story is related to the following:
Mounting and Attaching Products
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Line Isolators | Surge Protectors | Transient Voltage Surge Protectors | Voltage Surge Protectors

Alternator Power Distribution System targets marine engines.

info@productnews.com (ThomasNet News�) — Mon, 04 Oct 2010 08:32:18 -0400

ProIsoCharge zero-volt-loss battery isolator digitally controls power distribution of boat's engine alternator while protecting integrity of main engine start battery. Able to charge up to 3 battery banks from single alternator, it allows boaters to charge batteries and use alternator's output to power onboard marine electronics while cruising. Status display features warning LEDs that illustrate high and low alternator output, over-voltage protection, and high voltage conditions.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mounting and Attaching Products

Search for suppliers of: Power Distribution Systems | Battery Isolators | Battery Chargers

Mechanical Clamp is intended for seismic bracing.

info@productnews.com (ThomasNet News�) — Wed, 13 May 2009 08:27:41 -0400

Fast Clamp attachment offers 12 in. of overall adjustment, allowing rough-in style installation and eliminating cut length guess work. Fast Attach yoke design facilitates installation to multiple hanger rod sizes, reducing inventory needs for any particular job. While Figure 985 fits trapeze-style hangers or single pipe hangers and comes in 3/8-5/8 in. and ¾-7/8 in. hanger rod sizes, Figure 986 is offered in standard ½ in. rod size and designed to be upper or structural attachment.

This story is related to the following:
Material Handling and Storage Sponsored by: Dalmec Inc - The Source for Manipulators and Moving Technologies
Mounting and Attaching Products

Search for suppliers of: Adjustable Clamps | Clamps | Seismic Earthquake Bracing | Braces

Sway Braces feature one-size-fits-all design.

info@productnews.com (ThomasNet News�) — Thu, 30 Apr 2009 08:38:42 -0400

Compliant with NFPA® 13 standards, CADDY® range of products are suited for use with service pipe up to 10 in. and facilitate quick installation. They feature long-lasting, corrosion-resistant finish. Structural attachments include bar joist adaptor, I-Beam adaptor, and universal structural attachment/multi attachment. Sway braces are available in lateral or longitudinal and lateral versions.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Sway Braces | Seismic Earthquake Bracing

Battery Isolator reduces charging system workload.

info@productnews.com (ThomasNet News�) — Fri, 16 Jan 2009 08:38:23 -0400

Smart Battery Isolator 48525/48530 prevents loads on auxiliary battery from draining starting battery, regardless of alternator type. Available in 85 and 200 A versions, product reduces charging system workload by not connecting to auxiliary battery until primary battery is charged to 13.2 V. This minimizes strain on charging components, and no diode efficiency losses occur during use. Product also allows bi-directional charging from alternator or other power chargers/converters.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Battery Isolators

Isolators prevent accessories from draining car battery.

info@productnews.com (ThomasNet News�) — Fri, 10 Oct 2008 07:39:17 -0400

Battery isolators are suited for those who have high-power accessories that require use of second battery in their vehicle. They let user charge 2 batteries simultaneously and keep starting battery isolated during times when power is being used (without running engine) to ensure accessories do not drain start battery. Working on negative ground alternators, products are rated from 12-48 V and can only be used with batteries that have same voltage level.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Battery Isolators

Pharmaceutical Isolators offer built-in microbial protection.

info@productnews.com (ThomasNet News�) — Fri, 01 Aug 2008 07:51:29 -0400

Compliant with USP 797 criteria, Esco Pharmacy Isolators, Negative Pressure Models provide safe and clean environment for compounding of hazardous, sterile drug preparations including antineoplastics and cytotoxics. They include ULPA filters and ISOCIDE(TM) antimicrobial coating on all powder coated surfaces that eliminates surface bacteria. Other features include digital airflow and pressure displays, and stainless steel interiors with coved corners.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Pharmaceutical Integrator Isolators | Pharmaceutical Isolators & Barriers

High-Voltage Isolators are rated up to 15 kV at 80 mm.

info@productnews.com (ThomasNet News�) — Wed, 07 Nov 2007 07:47:59 -0400

Using plastic optical fiber, OPI1270 Series provides power electronics engineers with means to isolate high voltage I/O circuits over distances from 0.71-3.15 in. These RoHS-compliant axial fiber optic isolators are constructed using visible red (645 nm) LED emitter and phototransistor detector in separate opaque molded plastic modules, linked by shrouded and flexible optical cable that shields optical signal from dust and other contaminations.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Fiber Optic Isolators

Optically Coupled Isolators offer up to 6 kVdc isolation.

info@productnews.com (ThomasNet News�) — Wed, 09 May 2007 07:40:28 -0400

Comprised of IR emitting diode coupled to NPN silicon phototransistor or photodarlington, OPI7000 Series features reversed emitter and collector pin-out that enables direct pin-for-pin replacement of lower isolation voltage 4-pin dual in-line optocouplers mounted on existing PCBs. LED peak wavelength is 890 nm for the OPI7002/OPI7010 devices and 890 or 935 nm for OPI7320/OPI7340. Respectively listed CTR values are 20%, 100%, 200%, and 400%.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Fiber Optic Isolators

Bearing Isolator fits any idler type.

info@productnews.com (ThomasNet News�) — Wed, 25 Oct 2006 07:50:19 -0400

Suited for use in bulk solid applications, Belt Conveyor Idler/Roller Bearing Isolator features non-contacting, non-sparking bronze labyrinth type seal, which provides safe bearing protection that never wears out and requires only negligible amount of energy to operate. Custom-engineered to suit individual applications, isolator conforms to existing clearances, housings, and bearing patterns.

This story is related to the following:
Material Handling and Storage Sponsored by: Dalmec Inc - The Source for Manipulators and Moving Technologies
Mounting and Attaching Products

Search for suppliers of: Materials Handling Machinery | Mine Conveyors | Bearing Isolators

Storage Rack System protects against earthquake forces.

info@productnews.com (ThomasNet News�) — Thu, 30 Mar 2006 07:14:15 -0400

Tested up to full 200% of AC156 seismic qualification with little or no merchandise shedding or rack damage, Seismic Storage System reduces effects of violent ground forces created during earthquake. Base isolated pallet rack storage system is positioned between columns of upright frames and anchored to floor, allowing rack's upright frames to travel during seismic event. It will not obstruct or impede daily operations and can be moved during warehouse reconfiguration.

This story is related to the following:
Material Handling and Storage Sponsored by: Dalmec Inc - The Source for Manipulators and Moving Technologies
Mounting and Attaching Products

Search for suppliers of: Storage Racks | Pallet Racks | Pallet Stacking Frames | Seismic Base Isolation Devices

Barrier Isolater handles hazardous pharmaceutical compounds.

info@productnews.com (ThomasNet News�) — Mon, 26 Dec 2005 06:45:16 -0400

Available as 5 ft wide, 2-glove position unit, ChemoSHIELD® Model CS500 offers contained, negative-pressure work area suitable for potentially harmful chemotherapy agents or IV admixtures. Its unidirectional HEPA-filtered airflow of better than ISO Class 5 air cleanliness conditions within chamber prevents migration of hazardous contaminants. Ergonomic design has slanted viewscreen angled at 10° with top hinge to allow full opening for loading of pharmacy equipment.

This story is related to the following:
Material Handling and Storage Sponsored by: Dalmec Inc - The Source for Manipulators and Moving Technologies
Mounting and Attaching Products
Laboratory and Research Supplies and Equipment

Search for suppliers of: Pharmaceutical Integrator Isolators | Barrier, Containment, Controlled Atmosphere, Isolation, Laboratory, Cleanroom Glove Boxes

Barrier Isolator assists with USP<797> compliance.

info@productnews.com (ThomasNet News�) — Mon, 25 Jul 2005 08:08:51 -0400

Featuring contained, positive-pressure work area, SterilSHIELD® Model SS500 is designed for aseptic compounding of non-hazardous drugs. It creates HEPA-filtered unidirectional airflow of better than ISO Class 5 air cleanliness conditions within chamber. Measuring 5 ft wide, unit has 2-glove positions and ergonomic design with slanted viewscreen, top hinge, and oval gloveports. With touchpad membrane control, microprocessor controller enables operation without relays or switches.

This story is related to the following:
Material Handling and Storage Sponsored by: Dalmec Inc - The Source for Manipulators and Moving Technologies
Mounting and Attaching Products
Laboratory and Research Supplies and Equipment

Search for suppliers of: Barrier, Containment, Controlled Atmosphere, Isolation, Laboratory, Cleanroom Glove Boxes | Pharmaceutical Integrator Isolators

Seismic Retrofit Bracket braces trapeze installations.

info@productnews.com (ThomasNet News�) — Tue, 04 Nov 2003 08:35:37 -0400

Model B650 is a California OSHPD-approved bracket, which allows installers to brace and support existing trapeze supports and single pipe hangers. It is comprised of bracket, key, and support plate, can be adjusted to fit angle of support. Unit is available for 3/8, 1/2, 5/8, and 3/4 in. all threaded rod. Finishes include zinc-plated, Dura-green, HDG, and SS4.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Seismic Earthquake Bracing

Bearing Isolators help prevent unscheduled downtime.

info@productnews.com (ThomasNet News�) — Thu, 22 May 2003 07:48:32 -0400

VBXX-MTâ"¢ protects machine tools from coolant, chips, humidity, and heat that can cause spindle malfunction and unscheduled downtime. Based on VBX technology, unit combines non-contacting labyrinth seals with reverse interface that avoids direct impingement of coolant and chips. Technology also eliminates humidity ingress when spindle is at rest, while contact technology positively seals at shutdown, but operates without contact while running.

This story is related to the following:
Mounting and Attaching Products

Bearing Isolators protect against contamination.

info@productnews.com (ThomasNet News�) — Fri, 23 Aug 2002 07:50:53 -0400

Inpro/Seal® VBXâ"¢ Bearing Isolators eliminate moisture, dirt, and abrasives that contaminate bearing environments, protecting motors from failure. Isolators are available for new and rebuilt premium efficiency severe-duty electric motors.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Bearing Isolators

Isolators protect bearings from environment.

info@productnews.com (ThomasNet News�) — Thu, 23 May 2002 09:59:52 -0400

VBXX-Dâ"¢ Series Isolators consist of rotor and stator, and are designed to keep bearings uncontaminated and properly lubricated. They are suitable for use in rotating equipment, including motors, machine tool spindles, gear boxes, blowers, turbines, fans, and pumps. Once installed, users obtain non-contacting labyrinth sealing technology for improved uptime.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Bearing Isolators