ThomasNet Industrial Newsroom -

Bump Adapters fit any BGA device on 0.40 mm pitch board.

info@productnews.com (ThomasNet News) — Thu, 19 Nov 2009 08:33:12 -0500

Fine Pitch Bump Adapters allow use of higher pitch devices on boards with pitches down to 0.40 mm. While tops have landing pads that can be designed to accept any device on any pitch and settle into fine pitch footprints, bottom has raised connection pads up to 0.010 in. that facilitate mounting of adapter to target board. Adapters, which can operate up to 221°F (FR4) and 266°F (lead-free), can be manufactured for RoHS compliance.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Socket Adapters

BGA Socket Adapter accepts Samsung MCP memory device.

info@productnews.com (ThomasNet News) — Tue, 20 Oct 2009 08:41:17 -0500

Consisting of solder balls on bottom side and round pads on topside, Model SF-BGA199B-B-05 accommodates 0.65 mm pitch, 12 x 16 mm body, 18 x 22 array Samsung MCP KMYFE0C0CM-D300 memory ICs. If target circuit board already exists or mounting holes cannot be drilled into target board, then BGA SMT adapter can be used with Ironwood GHz socket. Constructed with high temperature FR-4, adapter assures match with target PCB's CTE and prevents failures that may occur with CTE mismatch.

This story is related to the following:
Mounting and Attaching Products
Electronic Components and Devices

Search for suppliers of: Socket Adapters | Ball Grid Array (BGA) Sockets

BGA Adapters connect 0.50 mm devices to 1.00 mm boards.

info@productnews.com (ThomasNet News) — Fri, 16 Oct 2009 08:40:24 -0500

Designed to adapt smaller pitch devices to larger footprints, Switch-A-Pitch Adapters eliminate need for laser-drilled microvias on motherboards while enabling use of standard line and trace spacing down to 0.003 in. Adapters have tops with BGA landing pads on 0.50 mm pitch and bottoms fitted with BGA balls on 1.00 mm pitch. Operating up to 221°F for FR4 or up to 266°F for lead-free, adapters feature non-solder mask defined pads finished with electroless nickel immersion gold.

This story is related to the following:
Mounting and Attaching Products
Electronic Components and Devices

Search for suppliers of: Socket Adapters | Ball Grid Array (BGA) Sockets | Printed Circuit Board (PCB) Connectors | Adapters

Chip Size BGA Adapter suits automotive applications.

info@productnews.com (ThomasNet News) — Fri, 02 Oct 2009 08:29:24 -0500

Constructed with Torlon 5530 material, SFS-BGA104A-52 allows 0.5 mm pitch, 8 x 8 mm body, and 15 x 15 array BGA devices to be socketed and operate without compromising performance. Giga-snaP(TM) BGA SMT adapter pair consists of SFS-BGA104A-52 female sockets with machined pins and sleeve spring that matches male pin LSS-BGA104A-51. Required force per pin of 40 g facilitates plugging/removal, and physical connection length of 2.8 mm promotes high-frequency signal transmission.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Socket Adapters

Adapter allows prototyping of BGA ICs.

info@productnews.com (ThomasNet News) — Thu, 27 Aug 2009 08:40:06 -0500

Constructed with gold plated solder-tail machined pins, PA-BGA117C-P-S-01 prototyping adapter interfaces 117 position 0.075 in. pitch BGA SMT land pattern to 0.100 in. center pin grid array. Clam-shell spring pin ZIF socket, SS-BGA117C-01 can be used with adapter for access to address and data lines. Socket operates at bandwidths up to 10 GHz with less than 1 dB of insertion loss, and can handle up to 100 W with custom heat sink. Self inductance of contactor is typically 0.62 nH/pin.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Socket Adapters

Adapters provide smaller pitch pads for larger pitch boards.

info@productnews.com (ThomasNet News) — Fri, 17 Jul 2009 08:32:22 -0500

Facilitating high density interconnect (HDI) construction, BGA Switch-A-Pitch Adapters allow tighter pitch devices to be placed on existing larger pitch designs. Series includes models with tops where BGA landing pads are on 0.40 mm pitch and adapter bottoms are populated with BGA balls on 1.27 mm pitch. Measuring 0.062 in. thick, design eliminates need for laser-drilled microvias on motherboards; standard line and trace spacing down to 0.003 in. can be used.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Socket Adapters

Bump Adapters connect 0.4 mm ICs to 0.5 mm pitch PCBs.

info@productnews.com (ThomasNet News) — Wed, 17 Jun 2009 08:30:07 -0500

Offering standard pin 1-to-pin 1 routing connection scheme, which can be customized to accommodate any connection requirement, Fine Pitch Bump Adapters enable use of any SMT IC device on pitch of 0.4 mm or higher to 0.5 mm pitch PCBs designed for TSSOP and QFP packages. Adapter boards are fabricated from 0.032 in. thick FR4 or Rogers 370 HR, with ½ oz copper traces on both sides. Operating temperature is up to 221°F for FR4 versions and 226°F for lead-free version.

This story is related to the following:
Computer Hardware and Peripherals
Electronic Components and Devices
Mounting and Attaching Products

Search for suppliers of: Adapter Boards | Printed Circuit Board (PCB) Connectors | Socket Adapters | Integrated Circuit Connectors

BGA SMT Adapters are available in many different pin counts.

info@productnews.com (ThomasNet News) — Mon, 08 Jun 2009 08:30:33 -0500

Giga-snaP(TM) BGA SMT adapter pair consists of SF-BGA316C-B-62F female sockets with machined pins epoxy over-molded into assembly that matches male pin LS-BGA316C-61. Soldered to PCB using standard soldering methods without warping, SF-BGA316C-B-62F allows 0.8 mm pitch, 17 x 17 mm body, 20 x 20 array Analog Device ADSP-BF539/ADSP-BF539F ICs to be socketed and operate in demanding automotive applications. Both adapters are constructed with high temperature FR-4 bodies.

This story is related to the following:
Electronic Components and Devices
Mounting and Attaching Products

Search for suppliers of: Ball Grid Array (BGA) Sockets | Socket Adapters | Integrated Circuit Connectors | Printed Circuit Board (PCB) Connectors

Adapters connect small pitch devices to large pitch boards.

info@productnews.com (ThomasNet News) — Fri, 03 Apr 2009 08:38:17 -0500

Offered in panelized form, as adapter only, or with mounted devices, Switch-A-Pitch Adapters have tops where BGA landing pads are on 0.5 mm, and bottoms with BGA balls on 1.27 mm pitch. Units are 0.062 in. thick FR4 or Rogers 370 HR, with ½ oz copper traces on both sides. Non-solder mask defined pads are finished with electroless nickel immersion gold and have solder spheres of 63/37 lead/tin or of lead-free SAC305 alloy. Devices operate up to 221°F for FR4 or 226°F for lead-free.

This story is related to the following:
Mounting and Attaching Products
Electronic Components and Devices

Search for suppliers of: Socket Adapters | Printed Circuit Board (PCB) Connectors

Fixed-Prong Wall Adapters are ENERGY STAR® EPS 2.0-compliant.

info@productnews.com (ThomasNet News) — Thu, 02 Apr 2009 08:40:31 -0500

Delivering 12 Vdc output, PSA12A-120-R and PSA12E-120-R 12 W wall-mount adapters are designed for use in USA and Europe respectively. They are double insulated, Class B EMI compliant, and have no-load power consumption of less than 0.3 W. Protected against over-voltage and short-circuit, products can operate in temperature range of 0-40°C and can tolerate up to 90% humidity. Applications include wireless communications, networking, portable equipment, and peripherals.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mounting and Attaching Products
Green & Clean

Search for suppliers of: AC/DC Wall Plug-In Adapters | Socket Adapters | International Electric Adapters

Bottom Loading Adaptor targets high-flow applications.

info@productnews.com (ThomasNet News) — Mon, 02 Feb 2009 08:34:56 -0500

Available in openable and non-openable versions, 891 Series API Adaptors conform to API RP-1004, ADR, and EN13083 specifications. Units include poppet seal that can be replaced without removing adaptor from tank, flat bottom design for minimal product retention, stainless steel internals, and Viton® GFLT seals. Adaptors are compatible with diesel, biodiesel, gasoline, ethanol, and methanol.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Tank Adapters

Adapter accelerates multi-point round rod system assembly.

info@productnews.com (ThomasNet News) — Fri, 16 Jan 2009 08:38:24 -0500

Assembly method for attaching round rods to latch in multiple-point locking applications eliminates need for screws and tools. Round rod slides into polyamide adapter and remains in place, and resulting assembly is clipped onto grooved stud of 2- or 3-point cam. Rattle-free solution accelerates assembly, and end-users can cut standard-length round rods to custom lengths. Once attached to rod, adapter will not loosen, separate from rod, or come off.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Mounting and Attaching Products

Search for suppliers of: Cabinet Latches | Latches | Adjustable Adapters

Shaft Adapters eliminate need for special shafting.

info@productnews.com (ThomasNet News) — Mon, 15 Sep 2008 07:40:58 -0500

Including Series S52FCY with 21 inch and S52FCYM with 27 metric sizes, Shaft Reducers and Extenders incorporate Fairloc® fastening system, which consists of 2 slots that are machined into hub, one radially the other angularly, to create transverse wedge that remains attached to solid portion of hub on one side. Adapter's female end fits 14 shaft diameters ranging from .1200-.4998 in. (3-12 mm), while male side consists of shafts ranging in diameter from .1247-.4997 in. (3-12 mm).

This story is related to the following:
Mounting and Attaching Products
Mechanical Power Transmission

Search for suppliers of: Metric Adapters | Shaft Size Adapters

Lock Adapter aids hollow shaft drive installation/removal.

info@productnews.com (ThomasNet News) — Mon, 15 Sep 2008 07:40:55 -0500

Smart Lock Set facilitates installation and removal of hollow shaft drives, even after extended periods of service time. It is comprised of indestructible shrink disc, cylindrical adapter and support bushing, hollow shaft, and cover. Adapter bushing enables use of universally available bore diameters and hollow shaft dimensions. This enables gearbox hollow shaft to cover wider range of solid shaft diameters.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Adjustable Adapters

Multimedia Terminal Adapter suits multi-dwelling units.

info@productnews.com (ThomasNet News) — Tue, 19 Aug 2008 07:42:54 -0500

Featuring modular, embedded design, SURFboard® M-eMTA provides multi-line IP voice and high-speed data services for multi-dwelling units in one device. Platform enables simultaneous use of both phone line and computer, and support for services such as caller ID, call waiting, and call forwarding. Scalable system features interchangeable modules, allowing any combination of 2- or 4-line modules per unit, granting cable operators up to 48 lines within one unit.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Terminal Adapters

Socket turns power outlet into network connection.

info@productnews.com (ThomasNet News) — Thu, 13 Mar 2008 07:35:35 -0500

With speeds up to 200 Mbps, PlugLink® AV 9667 iSocket turns every power outlet into Ethernet network connection, while retaining use of power outlet. Filtered pass-through prevents network performance degradation from noisy devices on electrical wiring. Equipped with 128-bit AES encryption, PlugLink supports audio, media presentations, photos, video, and VoIP as well as multiple streams of HDTV, making it suited for connecting to DVRs, set-top boxes, or IPTV applications.

This story is related to the following:
Computer Hardware and Peripherals
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mounting and Attaching Products

Search for suppliers of: Voice & Data Electronic Outlets | Socket Adapters | Ethernet Networking Accessories

Analog Terminal Adapter enables faxing over IP network.

info@productnews.com (ThomasNet News) — Mon, 25 Feb 2008 07:51:09 -0500

With SAGEM FAX ATA 101S, companies can extend life of analog fax machines while transitioning to converged IP networks. Unit offers seamless, plug-and-play integration and is compliant with iPBX gateways and Unified Communications platforms, supporting such standards as SIP, T.38, and G.711. Measuring 6 x 4 x 1 in., adapter enables remote upgrades and guarantees integrity of incoming and outgoing fax transmissions.

This story is related to the following:
Communication Systems and Equipment
Mounting and Attaching Products

Search for suppliers of: Terminal Adapters | Communication Adapters

DOCSIS 3.0 EMTA offers data speeds up to 160 Mbps.

info@productnews.com (ThomasNet News) — Fri, 18 Jan 2008 07:31:05 -0500

Touchstone® TM702 Embedded Multimedia Terminal Adapter (EMTA) provides converged voice and data service. It bundles 2 lines of carrier grade VoIP telephone service with DOCSIS 3.0 bonded channel ultra high-speed capability. Variety of battery, non-battery, and region-specific configurations, such as DOCSIS, Euro-DOCSIS, and Japanese annex standards, are offered by device.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Terminal Adapters

Drive Adapters replace IDE/SATA HDDs with CF media.

info@productnews.com (ThomasNet News) — Wed, 25 Apr 2007 07:46:29 -0500

Offered in 3 versions, CF Hard Drive Adapters enable Compact Flash (CFI/II) media or Micro Drive to be used as direct replacement for 2.5 in. IDE or SATA hard drives (HDDs) in notebook, desktop, or industrial PCs. SATA version has single CF slot, while IDE and embedded 44-pin IDE-CF adapters offer choice of 1 or 2 slots. Once installed, CF card appears as ordinary hard drive to system BIOS and operating system. It can also be configured as boot device.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Adapters | Terminal Adapters

Phone Adapter enables full-motion, 3-way videoconferencing.

info@productnews.com (ThomasNet News) — Fri, 20 Apr 2007 08:07:04 -0500

To turn regular home phone into full-motion videophone, Packet8 Video Terminal Adapter features built-in 5 in. color LCD and 180° rotating CCD camera that delivers video at up to 30 fps along with delay-free audio. SIP-compliant broadband phone adapter uses H.264 video and features icon-based GUI. Weighing 1.5 lb, 8 ½ x 5 ½ x 1.38 in. free-standing device folds completely flat and includes built-in router and USB port, external RJ11 FXS port, and 2 Ethernet interfaces.

This story is related to the following:
Communication Systems and Equipment
Mounting and Attaching Products

Search for suppliers of: Communication Equipment | Terminal Adapters | Communication Adapters | Video Conferencing Systems | Tele-Video Conferencing Products