ThomasNet Industrial Newsroom -

Multi-Extrusion Gaskets provide EMI shielding.

info@productnews.com (ThomasNet News) — Wed, 18 Nov 2009 08:41:38 -0500

Extruded in various sizes and profiles, EMI Gemini(TM) Gaskets combine thin, electrically conductive filler elastomer gasket layer and inner, non-conductive silicone coated core gasket. Products provide EMI protection with minimized deflection while sealing against environmental influences such as moisture and dust. Gaskets are suited for military, medical, and commercial applications requiring application-specific shielding.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Extruded Silicone Gaskets | Extruded Gaskets | EMI/RFI Shielding Gaskets

Sanitary Gasket delivers optimal sealing performance.

info@productnews.com (ThomasNet News) — Tue, 20 Oct 2009 08:41:12 -0500

Made from 100% expanded PTFE, GORE(TM) STA-PURE(TM) Sanitary Gasket meets ASME BPE equipment seal standards and passes ASME BPE intrusion categories I and II after 500 SIP cycles. It can be used universally and integrated into various systems, allowing standardized operations. Combining dimensional stability with chemical inertness of PTFE, gasket suits critical bioprocess systems in various applications.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Expanded PTFE Gaskets

Removable Liquid Gasket seals frequently serviced flanges.

info@productnews.com (ThomasNet News) — Tue, 25 Aug 2009 08:27:38 -0500

Designed to seal close-fitting flanges against same temperatures, pressures, and chemicals as traditional liquid gaskets, Loctite® 5203(TM) removes without machining or chemicals. Red anaerobic gasketing material ranges in viscosity from 50,000-100,000 cP and fills gaps to 0.010 in. without primer or 0.020 in. with primer. Designed to withstand operating temperatures from -65 to 300°F, gasket fully cures in 15 min to 6 hr and is suited for use in engines, pumps, and compressors.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Mounting and Attaching Products

Search for suppliers of: Flange Sealants | Gasketing | Anaerobic Adhesives

Sealing Gasket is designed for D-shaped chassis connectors.

info@productnews.com (ThomasNet News) — Thu, 25 Jun 2009 08:28:47 -0500

Providing dust and water resistant assembly for D-Shaped chassis connectors, SCDP gasket is designed for use with opticalCON DUO and QUAD fiber connectors and/or any Neutrik product using standard D-style cutout, including water resistant USB/FireWire and HDMI feedthroughs. Gasket is available in 6 different colors including black (SCDP-0), red (SCDP-2), yellow (SCDP-4), green (SCDP-5), blue (SCDP-6), and white (SCDP-9).

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Gasket Assemblies | Industrial Gaskets

Sealing Gasket is available in sizes ranging from 1-8 in.

info@productnews.com (ThomasNet News) — Wed, 24 Jun 2009 08:28:13 -0500

Designed for low-temperature performance applications, patent pending Flush Gap(TM) gasket features triple sealing ribs on each gasket seal face. It contains center rib which fits flush over gap between pipe ends and closes off gasket cavity, allowing for reduction of buildup of moisture and ice which can cause leakage under freezing conditions. When combined with Gruvlok Xtreme(TM) lubricant, Flush Gap(TM) provides gasket seal for grooved couplings in extreme temperature applications.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Pipe Gaskets | Self-Sealing Gaskets

Setting Blocks/Separator Pads are made of recycled rubber.

info@productnews.com (ThomasNet News) — Tue, 16 Jun 2009 08:29:13 -0500

Available in either EPDM or neoprene commercial-grade rubber, eco-friendly Separator Pads and Setting Blocks are made from blend of finely-ground tire rubber and plastics. They are certified as stain-resistant, offer low specific gravity and weather resistance, and can be recycled. Self-sticking protective pads and blocks target window, door, shipping, and construction industries. Products are also offered in adhesive-backed versions coated with acrylic PSA that is non-marring.

This story is related to the following:
Mechanical Components and Assemblies
Mounting and Attaching Products
Green & Clean

Search for suppliers of: Rubber Pads | Protective Pads | Setting Blocks

Conductive Tapes meet shielding and adhesive needs.

info@productnews.com (ThomasNet News) — Tue, 16 Jun 2009 08:29:07 -0500

Offered in foil, film, laminates, and high-temperature versions, conductive tapes can be applied to EMI/RFI shielding and printed circuit board applications. PCB tapes are available in kapton, silicone, and acrylic adhesives for finger planting and wave solder uses. Designed for low- and high-temperature work, electric and electrical insulation tapes are available in range of gauges with various adhesive types and are die cut for accelerated application.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Mounting and Attaching Products
Materials and Material Processing

Search for suppliers of: Silicone Tapes | Kapton Tapes | High Temperature Tapes | Foil Tapes | Film Tapes | EMI/RFI Shielding Tapes | Electrical Tapes | Conductive Tapes | Circuit Board Tapes | Tapes

Form-In-Place Gaskets promote productivity, reliability.

info@productnews.com (ThomasNet News) — Thu, 22 Jan 2009 08:29:56 -0500

Featuring heat and humidity resistance as well as compression set characteristics that lend to reliability and longevity, EMI SENTRY(TM) products consist of 4 silicone-based pastes for dispensing onto substrate. Room temperature-cure products include SNK55-RXP (silicone with silver/copper) and SNL60-RXP (silicone with silver/aluminum), while oven-cure products include SNK60-HXP (silicone with silver/copper) and SNL70-HXP (silicone with silver/aluminum).

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Silicone Gaskets | Formed-In-Place Gaskets

Setting Blocks add protection to window production.

info@productnews.com (ThomasNet News) — Fri, 02 Jan 2009 08:40:43 -0500

Offered in commercial-grade silicone, neoprene, or EPDM, Press-On Setting Blocks are installed inside window sash, between sash and insulated glass unit, to deliver protection to insulated glass from impact of sash opening and closing. Blocks stop glass from cracking, while maintaining integrity of glazing bead. Standard roll sizes are 50-100 ft long in thicknesses from 1/16 to ¼ in. Silicone blocks are lab tested to perform in temperature range of -80 to 450°F.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Setting Blocks

Anti-Stick Agent accelerates gasket removal.

info@productnews.com (ThomasNet News) — Tue, 28 Oct 2008 07:33:32 -0500

Fused to surface of gasket material, Flange Free(TM) reduces time and effort required to remove gaskets from flanged joints after extended service. Inorganic coating does not contain chemicals that can cause gaskets to crack or otherwise degrade. Treatment reduces potential for residual particles to adversely affect performance of replacement gaskets or break loose, contaminate piping systems, and impair operation of downstream equipment.

This story is related to the following:
Paints and Coatings
Materials and Material Processing
Mounting and Attaching Products

Search for suppliers of: Anti-Stick Coatings | Stickiness Control Agents | Adhesive Backed Gaskets

EMI Shielding Gasket is made of soft molded elastomer.

info@productnews.com (ThomasNet News) — Wed, 22 Oct 2008 08:05:30 -0500

Consisting of silver plated copper particles dispersed within silicone elastomer, CHO-SEAL® 1270 offers shielding effectiveness greater than 70 dB from 100 MHz through 10 GHz. With 35 ±5 Shore A hardness and 9% compression set, product suits applications such as handheld electronics, test equipment, navigation devices, ruggedized computers and routers. Available forms include compression molded sheets, die-cut parts and custom molded shapes with thickness range of 0.010-0.125 in.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Molded Gaskets | Conductive Gaskets | Custom Gaskets | Die Cut Gaskets | EMI/RFI Shielding Gaskets

Gasket Material suits tack-free surface applications.

info@productnews.com (ThomasNet News) — Thu, 02 Oct 2008 07:33:24 -0500

With high adhesion to plastics, Light Weld® GA-140 soft gasket material provides barrier to prevent absorption or penetration of air, dust, moisture, liquids, and gaseous substances. UV/Visible light-curable form-in-place and cure-in-place gasket is used for sealing fuel cells, appliance housings, and electronic assemblies. Low out-gassing unit can be dispensed into intricate and complex configurations with benefit of in-line curing, and its viscosity allows for varying bead heights.

This story is related to the following:
Mounting and Attaching Products
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Gasket Material | Gasket Sealants

Cabinet Enclosure Line provides design flexibility.

info@productnews.com (ThomasNet News) — Wed, 27 Aug 2008 07:33:51 -0500

Outdoor enclosure line is offered in 19, 23, and 24 in. widths, 24, 30, 36, and 42 in. depths, and 12U-44 U heights. For NEMA 4 designs, EDMP gasketing for waterproofing and dust/particle protection is employed, which is resistant to UV, ozone, weathering, seawater, compression set and abrasion and has temperature range of -40 to 120°C and is tested to UL 508. Heavy-duty aluminum frame can be incorporated with integrated gasketing, corner castings, multi-point locking system, and windstops.

This story is related to the following:
Electronic Components and Devices
Mounting and Attaching Products

Search for suppliers of: Enclosure Gaskets | Aluminum Outdoor Enclosures | Custom Electronic Enclosures

Gasketing Material produces moisture-resistant seals.

info@productnews.com (ThomasNet News) — Tue, 19 Aug 2008 07:42:45 -0500

Offered as one-part resin that requires no mixing, Ultra Light-Weld® GA-111 can be dispensed into intricate and complex configurations and cures within seconds. In-line curing capability promotes production speed, and viscosity allows for varying bead heights. This UV/Visible light-curable, form-in-place (FIP), soft gasket material adheres to metals while providing barrier to prevent absorption or penetration of air, dust, moisture, liquids, and gaseous substances.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Formed-In-Place Gaskets | Gasket Material

Gasketing Resin offers high adhesion to metals.

info@productnews.com (ThomasNet News) — Fri, 13 Jun 2008 07:45:21 -0500

Providing barrier to prevent absorption or penetration of air, dust, moisture, liquids, and gaseous substances, Ultra Light-Weld® GA-111 suits applications requiring low compression set, tack-free surface, and reliable sealing. UV/Visible light-curable form-in-place gasket can be dispensed into intricate and complex configurations with help of in-line curing. With viscosity that allows for varying bead heights, low out-gassing product cures completely in seconds.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Formed-In-Place Gaskets

Silicone Gaskets and Seals offer fire/toxicity protection.

info@productnews.com (ThomasNet News) — Fri, 21 Mar 2008 07:38:46 -0500

Interstate Cellular Silicone Gaskets and Seals are custom fabricated from open- and closed-cell substrates to match sealing, cushioning, vibration isolation, and insulation requirements. Designed to operate from -67° to +400°F, they are resistant to most chemicals and solvents and are available in closure forces from very soft to extremely firm. Products feature UL 94-0 HF-1 approvals and meet ASTM specifications for flame spread, smoke density, and low toxic gas emissions.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Mounting and Attaching Products

Search for suppliers of: Silicone Seals | Chemical Resistant Seals | Silicone Gaskets | Flame Resistant Gaskets | Chemical Resistant Gaskets

PTFE Gasketing exhibits strength, dimensional stability.

info@productnews.com (ThomasNet News) — Tue, 04 Mar 2008 07:41:23 -0500

Made from 100% expanded PTFE, GORE(TM) GR sheet gasketing withstands creep relaxation and promotes performance at elevated operating temperatures. Sheet integrity helps prevent fractures that can occur due to improper gasket loading in circumstances such as extreme flange deviation and misaligned flanges. Able to be used in most types of sealing applications, product is impervious to chemicals, suitable for use from -450 to +600°F, and withstands pressures to 3,000 psig.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: PTFE Gaskets

Gasketing Material minimizes VOC emissions.

info@productnews.com (ThomasNet News) — Thu, 15 Nov 2007 07:49:14 -0500

Suited for severe chemical service applications, Style 3575 Sage GYLON® Material provides optimized load retention and sealability, as well as minimized permeability, helping plants reduce emissions from hazardous solvents and chemicals. Able to withstand temperatures from -450 to +500°F, material is suited for applications ranging from standard raised face flange assemblies operating at constant temperature to process equipment subject to heavy thermal cycling.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Chemical Resistant Gaskets | Flange Gaskets | Gasketing

Gaskets suit critical service applications.

info@productnews.com (ThomasNet News) — Thu, 15 Nov 2007 07:49:14 -0500

Rated Best in Class for sealability, load retention, adhesion, and fire safety, Extreme Grade Gaskets are designed to maximize safety and environmental compliance. Anti-stick coating prevents gasket from sticking to flanges, minimizing flange damage and downtime. Able to withstand temperatures ranging from -40 to +650°F, gaskets are suited for water, steam, aliphatic hydrocarbons, oils, and gasolines.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Handhole Gaskets | Pump Gaskets

Gasket creates its own load for optimal reliability.

info@productnews.com (ThomasNet News) — Tue, 17 Jul 2007 07:48:53 -0500

Self-loading general service gasketing material, Multi-Swell(TM), creates its own load when it comes into contact with oil or water. Suited for MRO applications, product seals flanges in less than perfect conditions and minimizes maintenance. Environmentally friendly gasket performs equally in oil or water, does not degrade in contact with oils, and adapts to all types of flange designs. It also serves to prevent leakage and weeping during load loss.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Gasket Material | Gaskets | Self-Sealing Gaskets