ThomasNet Industrial Newsroom -

Tube Fittings aids in fluid handling applications.

info@productnews.com (ThomasNet News) — Tue, 27 Oct 2009 08:38:06 -0500

Featuring precise hose barbs and thread forms to ensure a secure fit, FitQuik(TM) Connectors are available in black and white nylon and animal-free, natural polypropylene. Fitting styles include luers, tube-to-tube, thread-to-tube, blood pressure fittings, and are offered with NPT and 10-32 threads.

This story is related to the following:
Mounting and Attaching Products
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Luer Fittings | Nylon Fittings | Tube To Tube Fittings | Medical Tube Fittings | Tube & Tubing Connectors | Barbed Fittings | Polypropylene Fittings | Quick Connect Fittings | Quick Disconnect Fittings

BGA Socket Adapter accepts Samsung MCP memory device.

info@productnews.com (ThomasNet News) — Tue, 20 Oct 2009 08:41:17 -0500

Consisting of solder balls on bottom side and round pads on topside, Model SF-BGA199B-B-05 accommodates 0.65 mm pitch, 12 x 16 mm body, 18 x 22 array Samsung MCP KMYFE0C0CM-D300 memory ICs. If target circuit board already exists or mounting holes cannot be drilled into target board, then BGA SMT adapter can be used with Ironwood GHz socket. Constructed with high temperature FR-4, adapter assures match with target PCB's CTE and prevents failures that may occur with CTE mismatch.

This story is related to the following:
Mounting and Attaching Products
Electronic Components and Devices

Search for suppliers of: Socket Adapters | Ball Grid Array (BGA) Sockets

Sanitary Gasket delivers optimal sealing performance.

info@productnews.com (ThomasNet News) — Tue, 20 Oct 2009 08:41:12 -0500

Made from 100% expanded PTFE, GORE(TM) STA-PURE(TM) Sanitary Gasket meets ASME BPE equipment seal standards and passes ASME BPE intrusion categories I and II after 500 SIP cycles. It can be used universally and integrated into various systems, allowing standardized operations. Combining dimensional stability with chemical inertness of PTFE, gasket suits critical bioprocess systems in various applications.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Expanded PTFE Gaskets

Steel Bellows Couplings offer nominal torques from 24-120 Nm.

info@productnews.com (ThomasNet News) — Fri, 16 Oct 2009 08:40:35 -0500

Available in 3 sizes, backlash-free primeflex Couplings can be plugged in and dismantled safely without risk, and can be mounted onto shafts via clamping or shrink disk connections. Torque is transmitted via frictional locking or via frictional and positive locking. Misalignment capability compensates for axial, radial, and angular shaft misalignments, while internal mechanism with integrated stop prevents damage that can occur with excess mounting pressure.

This story is related to the following:
Mechanical Power Transmission
Mounting and Attaching Products

Search for suppliers of: Zero Backlash Couplings | Bellows Couplings

BGA Adapters connect 0.50 mm devices to 1.00 mm boards.

info@productnews.com (ThomasNet News) — Fri, 16 Oct 2009 08:40:24 -0500

Designed to adapt smaller pitch devices to larger footprints, Switch-A-Pitch Adapters eliminate need for laser-drilled microvias on motherboards while enabling use of standard line and trace spacing down to 0.003 in. Adapters have tops with BGA landing pads on 0.50 mm pitch and bottoms fitted with BGA balls on 1.00 mm pitch. Operating up to 221°F for FR4 or up to 266°F for lead-free, adapters feature non-solder mask defined pads finished with electroless nickel immersion gold.

This story is related to the following:
Mounting and Attaching Products
Electronic Components and Devices

Search for suppliers of: Socket Adapters | Ball Grid Array (BGA) Sockets | Printed Circuit Board (PCB) Connectors | Adapters

Load Port meets wafer isolation and fab requirements.

info@productnews.com (ThomasNet News) — Mon, 12 Oct 2009 08:39:42 -0500

Automatic Door Opener(TM) delivers operational speed, cleanliness, reliability, and integration flexibility for loading/unloading SEMI standard 300 mm FOUPs. With MCBF over 650,000 cycles and calculated MTBF over 20,000 hr, system delivers better than Class 1 particle performance when integrated in Class 100 or better environment. It requires no periodic lubrication or re-alignment and utilizes DSP controlled electro-mechanical/pneumatic closed-loop servos for repeatable motion.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Mounting and Attaching Products

Search for suppliers of: Wafer Processing Systems | Wafer Handling Tools

Chip Size BGA Adapter suits automotive applications.

info@productnews.com (ThomasNet News) — Fri, 02 Oct 2009 08:29:24 -0500

Constructed with Torlon 5530 material, SFS-BGA104A-52 allows 0.5 mm pitch, 8 x 8 mm body, and 15 x 15 array BGA devices to be socketed and operate without compromising performance. Giga-snaP(TM) BGA SMT adapter pair consists of SFS-BGA104A-52 female sockets with machined pins and sleeve spring that matches male pin LSS-BGA104A-51. Required force per pin of 40 g facilitates plugging/removal, and physical connection length of 2.8 mm promotes high-frequency signal transmission.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Socket Adapters

Splicing Irons/Kits enable in-field expansion joint repair.

info@productnews.com (ThomasNet News) — Fri, 25 Sep 2009 08:36:19 -0500

Splicing irons, used for making emergency in-field repairs of non-metallic expansion joints, are available individually or as part of professional splicing kit. Latter includes splicing iron (P38), stapler, staples, spray adhesive, PFA splice film, spare fuses, splice rubbing block, scissors, and instruction manual. For protection and portability, all items are stored in watertight, dust-tight, foam-lined Pelican case.

This story is related to the following:
Mounting and Attaching Products
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Materials and Material Processing

Search for suppliers of: Non-Metallic Expansion Joints | Expansion Joints | Splicing Tools | Splicing Tapes | Rubber Splice | Splicing Kits

Adapter allows prototyping of BGA ICs.

info@productnews.com (ThomasNet News) — Thu, 27 Aug 2009 08:40:06 -0500

Constructed with gold plated solder-tail machined pins, PA-BGA117C-P-S-01 prototyping adapter interfaces 117 position 0.075 in. pitch BGA SMT land pattern to 0.100 in. center pin grid array. Clam-shell spring pin ZIF socket, SS-BGA117C-01 can be used with adapter for access to address and data lines. Socket operates at bandwidths up to 10 GHz with less than 1 dB of insertion loss, and can handle up to 100 W with custom heat sink. Self inductance of contactor is typically 0.62 nH/pin.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Socket Adapters

Removable Liquid Gasket seals frequently serviced flanges.

info@productnews.com (ThomasNet News) — Tue, 25 Aug 2009 08:27:38 -0500

Designed to seal close-fitting flanges against same temperatures, pressures, and chemicals as traditional liquid gaskets, Loctite® 5203(TM) removes without machining or chemicals. Red anaerobic gasketing material ranges in viscosity from 50,000-100,000 cP and fills gaps to 0.010 in. without primer or 0.020 in. with primer. Designed to withstand operating temperatures from -65 to 300°F, gasket fully cures in 15 min to 6 hr and is suited for use in engines, pumps, and compressors.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Mounting and Attaching Products

Search for suppliers of: Flange Sealants | Gasketing | Anaerobic Adhesives

O-Rings resist corrosion match application requirements.

info@productnews.com (ThomasNet News) — Thu, 20 Aug 2009 08:30:00 -0500

Made from perfluoroelastomer, Viton®, neoprene, nitrile, EPDM, solid and cellular urethane or silicone, and santoprene, custom fabricated O-rings can be spliced, vulcanized, and supplied in sizes from 1/32 - 48 in. I.D. with 1/16 - ¼ in. cross sections, depending upon material and construction. They are available in hardness from supersoft to 90 Durometer. Applications include wide range of pumps, valves, compressors, and devices used in medical instruments.

This story is related to the following:
Mounting and Attaching Products
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Custom O-Rings

Expansion Joints feature non-metallic design.

info@productnews.com (ThomasNet News) — Wed, 29 Jul 2009 08:32:50 -0500

Suited for applications where system temperature does not exceed 400°F, Series 400 may be constructed of 2 plies of FKM fluoroelastomer and 1 or 2 plies of reinforcing material such as corrosion-resistant wire mesh or fiberglass cloth. Fluoroelastomer and reinforcing material are calendared and vulcanized to form rugged unit that is impervious to flue gases and resistant to acids. All joints are available in flanged designs, which feature continuous molded corner.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Non-Metallic Expansion Joints | Ducting Expansion Joints

Expansion Joint Repair Kit installs during operation.

info@productnews.com (ThomasNet News) — Thu, 23 Jul 2009 08:35:59 -0500

Expansion joint repair kit includes non-permeable bolster that covers damaged area to minimize leakage in or out. Bolster is secured with adjustable, high-tension straps, which can be secured to exposed bolt threads or frame itself without welding or removing any hardware. Patch seals damaged expansion joint until belt can be replaced, and repair kit can be installed in minimal time without shutting unit down. Various kit components may be reused.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Expansion Joints | Repair Kits

Adapters provide smaller pitch pads for larger pitch boards.

info@productnews.com (ThomasNet News) — Fri, 17 Jul 2009 08:32:22 -0500

Facilitating high density interconnect (HDI) construction, BGA Switch-A-Pitch Adapters allow tighter pitch devices to be placed on existing larger pitch designs. Series includes models with tops where BGA landing pads are on 0.40 mm pitch and adapter bottoms are populated with BGA balls on 1.27 mm pitch. Measuring 0.062 in. thick, design eliminates need for laser-drilled microvias on motherboards; standard line and trace spacing down to 0.003 in. can be used.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Socket Adapters

Custom O-Ring Kits suit hydraulic fittings and adapters.

info@productnews.com (ThomasNet News) — Thu, 09 Jul 2009 12:43:39 -0500

Specifically designed to provide O-rings for popular hose fittings and adapters, ORK-C4 Kits consist of carrying case, 4 separate product boxes with PIRTEK branding, and description of contents in each box. O-rings are suitable for S.A.E. flanges, flat face O.R.F.S., and O-ring boss male fittings.

This story is related to the following:
Mounting and Attaching Products
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Custom O-Rings

Elastomers exhibit explosive decompression resistance.

info@productnews.com (ThomasNet News) — Tue, 07 Jul 2009 08:33:55 -0500

Developed for oil and gas applications, XploR(TM) range of explosive decompression resistant materials includes compounds in HNBR, FKM, and Isolast® Perfluoroelastomer (FFKM), each of which demonstrates explosive decompression resistance. Materials in XploR(TM) range satisfy NORSOK M-710 sour service and Rapid Gas Decompression test conditions. They are available in standard international o-ring sizes and cross sections, along with custom-engineered solutions and seal designed profiles.

This story is related to the following:
Materials and Material Processing
Mounting and Attaching Products
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Perfluoroelastomers | Perfluoroelastomer O-Rings | Custom O-Rings | Perfluoroelastomer Seals | O-Ring Seals

Sealing Gasket is designed for D-shaped chassis connectors.

info@productnews.com (ThomasNet News) — Thu, 25 Jun 2009 08:28:47 -0500

Providing dust and water resistant assembly for D-Shaped chassis connectors, SCDP gasket is designed for use with opticalCON DUO and QUAD fiber connectors and/or any Neutrik product using standard D-style cutout, including water resistant USB/FireWire and HDMI feedthroughs. Gasket is available in 6 different colors including black (SCDP-0), red (SCDP-2), yellow (SCDP-4), green (SCDP-5), blue (SCDP-6), and white (SCDP-9).

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Gasket Assemblies | Industrial Gaskets

Sealing Gasket is available in sizes ranging from 1-8 in.

info@productnews.com (ThomasNet News) — Wed, 24 Jun 2009 08:28:13 -0500

Designed for low-temperature performance applications, patent pending Flush Gap(TM) gasket features triple sealing ribs on each gasket seal face. It contains center rib which fits flush over gap between pipe ends and closes off gasket cavity, allowing for reduction of buildup of moisture and ice which can cause leakage under freezing conditions. When combined with Gruvlok Xtreme(TM) lubricant, Flush Gap(TM) provides gasket seal for grooved couplings in extreme temperature applications.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Pipe Gaskets | Self-Sealing Gaskets

Bump Adapters connect 0.4 mm ICs to 0.5 mm pitch PCBs.

info@productnews.com (ThomasNet News) — Wed, 17 Jun 2009 08:30:07 -0500

Offering standard pin 1-to-pin 1 routing connection scheme, which can be customized to accommodate any connection requirement, Fine Pitch Bump Adapters enable use of any SMT IC device on pitch of 0.4 mm or higher to 0.5 mm pitch PCBs designed for TSSOP and QFP packages. Adapter boards are fabricated from 0.032 in. thick FR4 or Rogers 370 HR, with ½ oz copper traces on both sides. Operating temperature is up to 221°F for FR4 versions and 226°F for lead-free version.

This story is related to the following:
Computer Hardware and Peripherals
Electronic Components and Devices
Mounting and Attaching Products

Search for suppliers of: Adapter Boards | Printed Circuit Board (PCB) Connectors | Socket Adapters | Integrated Circuit Connectors

Setting Blocks/Separator Pads are made of recycled rubber.

info@productnews.com (ThomasNet News) — Tue, 16 Jun 2009 08:29:13 -0500

Available in either EPDM or neoprene commercial-grade rubber, eco-friendly Separator Pads and Setting Blocks are made from blend of finely-ground tire rubber and plastics. They are certified as stain-resistant, offer low specific gravity and weather resistance, and can be recycled. Self-sticking protective pads and blocks target window, door, shipping, and construction industries. Products are also offered in adhesive-backed versions coated with acrylic PSA that is non-marring.

This story is related to the following:
Mechanical Components and Assemblies
Mounting and Attaching Products
Green & Clean

Search for suppliers of: Rubber Pads | Protective Pads | Setting Blocks