ThomasNet Industrial Newsroom - Mounting & Attaching Products

Enclosure Extension Brackets require no assembly.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 23 Jul 2008 08:49:34 -0500

Attached to face of enclosure, netSELECT® Extension Brackets extend cabinet door out 2 in. and enable enclosures to accommodate networking and A/V equipment installations that require heat dissipation. Welded units are designed with louvers on top and bottom panels as well as multiple knock-outs for cable entry/exit and to accommodate WiFi antenna attachment. Designed to hold variously sized components, brackets can be used with 14 or 18 in. high enclosures.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Electronic Equipment Brackets

Isolator Mounting Bases isolate sensors up to 1,500 V.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 23 Jul 2008 08:49:34 -0500

Measuring 1 in. across flats with 0.82 mounting pad, Models SF21 and SF22 accommodate up to medium diameter accelerometers and small diameter side-exit accelerometers. Models SF23 and SF24 are both 1 1/8 in. across flats with 0.94 in. mounting pad that can accommodate large diameter top-exit sensors. All have ¼-28 integral stud on accelerometer side, and are used to prevent voltage spikes from reaching sensor by electrically isolating it from case of machine.

This story is related to the following:
Mounting and Attaching Products
Electronic Components and Devices
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Bases | Electric Signal Isolators | Isolators

Components provide sound damping and vibration resistance.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 Jul 2008 07:44:03 -0500

Suited for building of machinery and equipment, Urethane, Rubber, and Sponge Components come in round and metal plate-mounted versions as well as configurable block versions. Urethane and rubber bumpers feature round tips, and come in choice of solid or through-hole designs. With diameters, lengths, and through-hole sizes configurable in 1 mm increments, hundreds of sizes and shapes are available. Urethane blocks mounted on metal plates are offered in flat, V-shaped, and corrugated designs.

This story is related to the following:
Materials and Material Processing
Material Handling and Storage
Mounting and Attaching Products

Search for suppliers of: Damping Compounds | Vibration Dampeners | Machinery Vibration Absorbers

Mold Base is available in 70 sizes.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 Jul 2008 07:44:02 -0500

D-M-E Edge is full-featured mold base line with 70 sizes available. Full range of features include No. 3 EZ machine steel; guided ejection; 4 pry bar slots and lift holes installed; relocated return pins; vented leader pins; and 3-piece housing.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Mold Bases

Nylon Base Leveling Mounts swivel 15° and will not separate.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Jul 2008 07:29:28 -0500

Offered in steel and stainless steel, with or without lag holes, tapped-type NY-LEV® nylon base machinery mounts meet leveling and height adjustment needs. They are constructed with tapped socket and swivel 15° in all directions. Due to hex bar stock manufacturing process, hex acts as stop when moving socket beyond its 15° swivel point and ensures socket will not separate from nylon base. Products also feature glass-filled nylon plastic base and non-skid elastomer rubber pad.

This story is related to the following:
Mounting and Attaching Products
Material Handling and Storage

Search for suppliers of: Machinery Mounts | Leveling Mounts | Machine Levers

Cable Support System features blue and red J hooks.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Jul 2008 07:41:42 -0500

With blue and red color options, J-PRO(TM) Cable Support System lets users segregate and identify cable bundles for specific applications such as data, security, fire alarm, or other applications that require designated pathway. It also prevents cables from coming in contact with metal and provides complete bend radius control to help ensure cable performance.

This story is related to the following:
Mounting and Attaching Products
Material Handling and Storage

Search for suppliers of: Cable Hooks | Jack Hooks | Cable Clamps

Duct Hangers give large fabric duct inflated appearance.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 11 Jul 2008 07:37:43 -0500

Designed for larger fabric ductwork diameters in open architecture ceilings, 4x2 Suspension System(TM) simulates aesthetic inflated appearance even when heating/cooling air handlers are idle. Dual tension cables support duct clasps at 11 and 1 o'clock positions, while sculpted aluminum brackets support 10 and 2 o'clock positions with D-ring clips. Hanger system supports 50-60 in. dia DuctSox®, and factory-sewn D-clasps snap into ends of bracket to accelerate installation.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Hangers | Industrial Hangers

Heavy Tool Tether holds tools weighing up to 15 lb.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Jun 2008 07:42:44 -0500

Designed to both utilize and protect heavy tools, Gear Keeper Personal Heavy Tool Tether(TM) features ½ in. super coil and two 500 kg load-bearing carabiners. Unit is suitable for use in all kinds of weather and rough environments. Enclosed in nylon webbing for added strength, coil has retracted length of 21 in. and can extend up to 42 in. Low-profile coil system minimizes possibility of entanglement.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Coiled Tethers

Interlocking Shims conform to irregular shapes.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 23 Jun 2008 07:39:34 -0500

Usable in variety of shimming applications, Wedgies(TM) feature interlocking surfaces that allow them to be stacked so they can conform to irregular shapes and still maintain their lateral and vertical stability. Rigid polypropylene version is used to plumb or stabilize heavier objects while flexible vinyl version conforms to, protects, and cushions delicate underlying surfaces. Both styles are stable and will not shrink or swell with changes in moisture.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Plastic Shims | Adjustable Shims | Tapered Shims

Direct-Drive Rotary Systems suit various machining jobs.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 18 Jun 2008 08:00:08 -0500

Super-Precision® DD100/DD200/DD300 models incorporate frameless rare-earth permanent magnet torque motor, with no mechanical gearing, that wraps around spindle to eliminate need for separate motor extension. A ±.077 arc/sec resolution, ± 2.19 arc/sec accuracy encoder is mounted directly on spindle to provide accurate positioning. Direct-drive design eliminates backlash, enabling repeatability of ±2 arc/sec, and drawbar actuator lets products accept multiple workholding devices.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Positioning Systems

Harness and Lanyard resist grease, paint, and dirt.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 18 Jun 2008 07:43:51 -0500

Designed to meet requirements of AS/NZS 1891:2007 standard, Delta(TM) Resist Harness and EZ Stop® Resist Shock Absorbing Lanyard feature extruded polyurethane coating that protects against grease, oil, paint, dirt, and grime. Webbing deflects debris, cleans up in seconds, and extends service life. Utilizing RFID, i-Safe(TM) intelligent safety system is built into every harness and lanyard to track inspections, control inventory, and manage information.

This story is related to the following:
Safety and Security Equipment
Mounting and Attaching Products

Search for suppliers of: Linemen's Full Body Fall Protection Safety Harness | Shock Absorbing Lanyards | Lanyards

Analog Audio Video Wall Plate uses single Cat-5 cable.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 16 Jun 2008 07:42:57 -0500

Including Models AT-VGA-SR, AT-COMP-SR, AT-COMPAD-SR, and AT-AV-SR, Powerless Analog Audio Video Wall Plate Cat-5 Extenders utilize Cat-5 cables to extend analog audio and video signals up to 300 m, and do not require any power source. Available in Component, Component with Digital Audio (S/PDIF), Composite with Analog Audio, Analog Audio, and VGA, wall plates facilitate A/V installations in commercial, industrial, and residential buildings.

This story is related to the following:
Test and Measuring Instruments
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mounting and Attaching Products

Search for suppliers of: Cable Extenders | Category 5 Connectors | Wallplates

Gasketing Resin offers high adhesion to metals.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 13 Jun 2008 07:45:21 -0500

Providing barrier to prevent absorption or penetration of air, dust, moisture, liquids, and gaseous substances, Ultra Light-Weld® GA-111 suits applications requiring low compression set, tack-free surface, and reliable sealing. UV/Visible light-curable form-in-place gasket can be dispensed into intricate and complex configurations with help of in-line curing. With viscosity that allows for varying bead heights, low out-gassing product cures completely in seconds.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Formed-In-Place Gaskets

Compression Lug facilitates field installation.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 11 Jun 2008 07:21:58 -0500

Offered in 4 sizes (3.6-10.3) and 7 ampacity options (70-350 A), RoHS-compliant SurLok provides secure connection that ensures voltage and amperage levels are maintained throughout duration of application. Pin head locks into place once mated to RADSOK connector, and plastic housing snaps over connector to act as protective cover. Any U-indent/clamshell or 4-indenter crimp tool can be used to perform crimp termination on wire.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mounting and Attaching Products

Search for suppliers of: Locking Connectors | Compression Connectors

Bare Wires exhibit corrosion resistance.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 04 Jun 2008 07:40:51 -0500

Designed for welding nickel-copper alloys (ASTM B127, B163, B164, and B165), Arcos 816 (ERNiCu-7) electrode can be used for welding in salt, seawater, and reducing acids environments. Dissimilar welding applications include joining nickel-copper and copper-nickel alloys to Nickel 200. Developed for GTAW/GMAW overlay of nickel-chromium alloy onto carbon and stainless steel and for cast repair, Arcos 72 (ERNiCr-4) offers resistance to high temperature and fuel-ash corrosion.

This story is related to the following:
Welding Equipment and Supplies
Mounting and Attaching Products
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Welding Electrodes | Corrosion Resistant Wire | Bare Electric Wire | Welding Wire

Spun Pin Hinges are available in aluminum.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 04 Jun 2008 07:40:39 -0500

Suited for service in institutional, marine, and OEM applications, square aluminum butt hinges have non-removable stainless steel pin spun on both ends with no holes and no finish. Heavy-duty products, built to ANSI standards, can be designed using Guden standard templates or end-user-supplied specifications. They comply with RoHS regulations and can be used on doors, furniture, lockers, shipping cases, trunks, and more.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Truck Hinges | Special Hinges | Pivot Hinges | Marine Hinges | Locker Hinges | Door Hinges | Custom Hinges | Butt Hinges | Aluminum Hinges | Institutional Hinges | Heavy Duty Hinges

NEMA 12 Cabinet Coolers fit in tight spaces.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 29 May 2008 07:41:17 -0500

Side Mount Kits make mounting of a NEMA 12 Cabinet Cooler possible when electrical enclosure has limited space on top or side. Cabinet Cooler converts compressed air to 20°F without refrigerants or CFCs and circulates air through enclosure to eliminate high temperature malfunction. Cooling capacities up to 5,600 BTU/hr are available. Side Mount Kits maintain NEMA 12 rating of large and small electrical enclosures and models for use on NEMA 4 and 4X enclosures are also available.

This story is related to the following:
HVAC
Mounting and Attaching Products

Search for suppliers of: Cabinet Coolers | Machinery Mounts

Rubber Push-In Style Bumpers protect through holes.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 29 May 2008 07:40:25 -0500

Available in sizes to handle .118-.500 in. mounting hole diameters, Rubber Push-In Bumpers can be used on panel thicknesses from .098-.188 in. and come in range of different shapes to suit varying application requirements. Products are constructed of black SBR and fit snugly into mounting holes so that air or water cannot pass through. Operating temperature range is -40 to +221°F, and additional applications include use as feet.

This story is related to the following:
Mounting and Attaching Products

Search for suppliers of: Rubber Bumpers | Rubber Feet

Fall Protection Products withstand dirty environments.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 29 May 2008 07:39:59 -0500

Designed to meet OSHA, ANSI Z359-2007, and CSA Standards, Miller Revolution(TM) Harnesses and Miller® Shock-Absorbing Lanyards feature vinyl coating on webbing to protect against liquids that could compromise performance. Harnesses include rotary PivotLink(TM) connection, tongue buckle leg straps, 2 pull-free lanyard rings, and clip-on web finials. Rated to 310 lb, lanyards feature SofStop® shock absorber pack with woven inner core that expands up to 42 in. to safely reduce fall arrest forces.

This story is related to the following:
Mounting and Attaching Products
Safety and Security Equipment

Search for suppliers of: Linemen's Full Body Fall Protection Safety Harness | Shock Absorbing Lanyards | Fall Arrest Systems | Fall Protection Devices

Connectors suit factory automation and industrial controls.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 21 May 2008 07:43:10 -0500

Featuring insulation displacement technology to eliminate cable stripping and tinning, Mini-Clamp II Connectors have integrated guiding and alignment feature built into cover, which provides positioning of individual wires. Polarizing tabs help provide proper mating, while latching features help provide secure connection. Connectors are available in 3- and 4-pin wiremount configurations, in 2 socket styles, and plug version, as well as boardmount socket configurations.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mounting and Attaching Products

Search for suppliers of: Insulation Displacement Connectors | Clamp Type Connectors