ThomasNet Industrial Newsroom -

Timing Belt Drives come in inch and metric versions.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 11 Jul 2008 07:37:50 -0500

Comprised of 162 pulleys, QPMAT10 (metric) and QPEAT10 (inch) Series are made from 2024-T4 or 2024-T351 Aluminum Alloy or AISI 1045 Steel. All series offer double flange and flangeless types, with and without set screws for fastening to shafts. They are designed to fit inch shafts from .3750-.7500 in. and metric shafts from 8-16 mm. Made from nylon covered fiberglass reinforced neoprene, series of 22 AT10 timing belts are stocked in pitch lengths from 500-4,030 mm with 50-403 teeth.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Timing Belt Drives

Timing Pulleys feature configurable hub assortment.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 24 Apr 2008 07:36:47 -0500

Available in wide variety of materials/sizes, including high-torque versions, timing pulleys suit virtually any shaft hole and flange requirement. Dimensions for shaft hole and overall hub diameter are configurable in increments of 1 mm, while hub shoulder height is configurable in increments of 0.5 mm. Offered in several aluminum grades with clear anodize, electroless nickel plating, or hard anodized surface treatment, 1045 carbon steel and low carbon steel versions are also available.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Aluminum Pulleys | Timing Belt Pulleys

Timing Belt Drives accommodate narrow belts.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Jan 2008 07:31:35 -0500

Self-guiding Conidrive(TM) timing belt drives feature N10 belt and pulley system which has offset conical projection profile on bearing surface. With symmetrical cone geometry and balanced tension member arrangement, drives minimize noise and vibration plus offer homogenous distribution of forces in belt. Nondirectional 10 mm pitch belts have same meshing performance in both directions of belt travel. They are manufactured with polyurethane and are reinforced with steel tensile cords.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Timing Belt Drives

Stopper Blocks and Brackets suit machine and assembly builds.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 12 Oct 2007 07:47:10 -0500

Featuring compact counterbore design for flush fitting in tight spaces, compact-style stopper blocks offer configurable heights from 3-20 mm in 1 mm increments. Products are available in 304 low-carbon steel with black oxide or electroless nickel plating as well as 304 stainless steel. Also available, compact stopper brackets come in hex or bolt styles and are are likewise offered in low-carbon steel with black oxide or EN plating as well as 304 stainless steel.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Brackets | Steel Blocks

Timing Belt Drives have self-guiding design.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 08 May 2007 07:45:56 -0500

Conidrive(TM) self-guiding timing belt drives feature N10 belt and pulley system, which offers offset conical projection profile on bearing surface to ensure positive fit. Made from polyurethane and reinforced with steel tensile cords, nondirectional 10 mm pitch belts come in double- and triple-row configurations and feature polygon-free construction. Conidrive pulleys come in 1-, 2- and 3-row types, featuring nonchordal action. They incorporate Fairloc® integral nonmarring shaft hubs.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Timing Belt Drives

Timing Belt Drives features speeds up to 5 m/s.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 Sep 2006 08:30:55 -0500

Available in various motor and carriage configurations, Blue Line 1, Blue Line 3, ZF 1, ZF 2, and ZF 3 Series Slides suit wide variety of automation applications. All use HTD timing belt, have home position switches accurate to less than 0.1 mm, and repeatability of travel less than 0.2 mm. Timing belt features deep curvilinear profile for positive non-slip operation, compared with conventional trapezoidal tooth profile.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Timing Belt Drives

Timing Belt Pulleys feature integral hub fastening design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 23 Aug 2006 07:47:10 -0500

Made of clear anodized aluminum alloy, 3mm Pitch HTD® Series A 6D23 (inch) and Series A 6D23M (metric) are available in 10-44 grooves with bore sizes from .125-.250 in. and 3-6 mm. Outer diameters range from .346-1.624 in. and 8.8-41.4 mm. Fairloc® integral hub fastening design eliminates need for separate hub clamp devices and offers benefits of frequent position adjustment, while adding positive metal-to-metal fastening strength along entire hub surface.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Timing Belt Pulleys

Nylon Pulleys dissipate static electric build up.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 08 Mar 2006 07:05:55 -0500

Specifically designed and manufactured for static-sensitive applications, Pulleys and Accessories are made of nylon with PAN carbon fiber additives, which stop electrical charge build-up, dissipate charges from high-speed motion, provide grounding path, and prevent discharge to and from human contact. Built up of static electricity can cause end product loss and downtime in manufacturing and commercial applications.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors
Materials and Material Processing

Search for suppliers of: Special Pulleys | Static Control Products

Timing Belt Drive resists dust /airborne particle build-up.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 31 Jan 2006 07:20:48 -0500

Featuring plastic slide bearings, AZ-2000 timing belt drive offers travel speeds of up to 1.5 m/sec. Load carriage measures 150 x 100 mm and has pre-drilled and tapped payload mounting holes. Drive accepts downward payload forces up to 90 N and has repeatability of ±0.2 mm over travel spans up to 2,000 mm. Made of heavy duty synthetic rubber with built in steel cord strengthener, belt is housed in lightweight corrosion-resistant aluminum alloy extrusion.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Timing Belt Drives

Timing Belt Pulleys feature integral hub fastening system.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 08 Dec 2005 07:11:25 -0500

Designed for ¼ in. belts, .080 pitch MXL Series A6D16 is made of clear iridite aluminum alloy and available with 12-72 grooves in double- or no-flange types. Bore sizes range from .125-.250 in., and ODs range from .286-1.813 in. Fairloc® integral hub fastening design eliminates need for separate hub clamp devices, and offers benefits of frequent position adjustment, while adding positive metal-to-metal fastening strength along hub surface.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Grooved Pulleys | Timing Belt Pulleys

Timing Belt Pulleys feature integral hub locking system.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 08 Dec 2005 07:11:25 -0500

Comprised of 34 HTD® pulleys made of clear anodized aluminum alloy, A 6D23-(inch) and A 6D23M (metric) Series double flange type timing belt pulleys have 3 mm pitch and are designed for .236 in. belts. Fairloc® integral hub fastening design adds positive metal-to-metal fastening strength along entire hub surface. Products, available from stock in 10-44 grooves, come in bore sizes from .125-.250 in. and 3-6 mm, with ODs from .346-1.624 in. and 8.8-41.2 mm.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Aluminum Pulleys | Metric Pulleys | Timing Belt Pulleys

Small Pitch Timing Belt Pulleys synchronize shafts.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 Dec 2005 07:07:23 -0500

Designed for ¼ and 3/8 in. wide synchronous toothed belts with 1/5 in. pitch, Series A 6A 3, A 6C 3, A 6J 3, A 6M 3, and A 6Z 3 are suited for machine tools, mowers, and business machines. Units are available in double-flanged, single-flanged, and flangeless styles, as well as hubbed and hubless versions. With bores ranging from .1875-.500 in., pulleys are made of aluminum alloy, steel, Delrin, or molded fiberglass with reinforced nylon or Lexan.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Small Machinery Pulleys | Timing Belt Pulleys

Timing Belt Pulleys feature integral hub locking system.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 28 Oct 2005 07:13:29 -0500

Available with 15-120 grooves, A 6D51- (Inch) and A 6D51M (Metric) Series include 44, 2 mm pitch GT®2 pulleys made of clear anodized aluminum alloy. Fairloc® integral hub fastening design eliminates need for separate hub clamp devices, enables frequent position adjustment, and adds positive metal-to-metal fastening strength along entire hub surface. Designed for 6 mm belts, pulleys are offered in double- or no-flange types with ODs from .356-2.988 in. and 9-75.9 mm.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Aluminum Pulleys | Timing Belt Pulleys

Motorized Pulleys offer integrated shaft encoder.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 17 Oct 2005 07:04:49 -0500

BDL motorized pulleys allow conveyor system operators to synchronize product movements. Shaft encoders utilize SKF or SNR pulse outputs to monitor motorized pulley movement and control conveyor belt speed, position, torque, and rotational direction. Accurate conveyor belt movements, up to ±0.0002 in. at speeds of 19-500 fpm, are achievable. Mounted with 2 brackets, pulleys range from 3.18-12.6 in. in diameter with face widths from 7.8-67 in.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Motorized Pulleys

Timing Belt Pulleys feature self-contained hub fastener.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 14 Oct 2005 06:59:51 -0500

Available in double, single, or no flange styles, Series A 6H 3 consists of 1/5 in. pitch pulleys for 3/8 in. wide belts. Fairloc® integral hub fastening system facilitates phase adjustment, timing, position adjustment, and frequent removal problems while adding positive metal-to-metal fastening strength along entire width of pulley. Pulleys fit onto shafts from 3/16-3/8 in. diameter and have 10-72 grooves each.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Multiple Groove Pulleys | Timing Belt Pulleys

Timing Belts and Pulleys minimize noise and vibration.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 14 Jul 2005 08:19:02 -0500

Constructed of abrasion-resistant polyurethane and steel or stainless steel tension members, ARC-POWER PLUS belts are available as open-ended, spliced and welded endless, and truly endless. They provide 100% tracking in both running directions without flanges. Based on overlapping tooth arrangement, smooth interaction with idler and tensioners running on toothed side of timing belt eliminates tooth jumping.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Timing Belts | Timing Belt Pulleys

Timing Belt Pulleys feature integral hub fastener system.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 12 Jul 2005 08:14:49 -0500

Designed for ¼ in. belts, Series A 6D16 MXL .080 pitch timing belt pulleys are made of gold iridite aluminum alloy and are available in 12 to 72 grooves. Bore sizes range from .125 to .250 in. and ODs range from .286 to 1.813 in. They are available in double- or no-flange types and feature Fairloc® integral hub fastener that enables frequent position adjustment while adding positive metal-to-metal fastening strength along entire hub surface.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Timing Belt Pulleys | Aluminum Pulleys

Drum Motors solve material handling challenges.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 03 Feb 2005 07:46:39 -0500

With motor, transmission, and bearings totally enclosed in drum shell, Series BLD conveyor drive systems produce noise levels of 50 dB, meeting OSHA requirements. Rated from 0.11-7.5 hp and running at 96% efficiency, drum motors range in diameter from 3.18-12.6 in. with face widths from 7.8-67 in. Belt speeds range from 23-1,369 fpm. Mounted with 2 brackets, sealed-for-life units are virtually maintenance-free and protected from water, dirt, dust, and chemicals.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Conveyor Drives | Drum Motors | Motorized Pulleys

Motorized Pulleys are rated to 30 hp.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 Jul 2004 07:41:55 -0500

Built for belt conveyors, pulleys are designed with motor and gearbox enclosed within hermetically sealed steel shaft, making them suited for use in harsh environments. Model 220H, with 8.5 in. dia, is available rated to 7.5 hp; models 320M and 320H, both with 12.64 in. dia, are rated to 10 hp; models 400M and 400H, with 15.91 in. dia each, are rated to 20 hp; and model 500H, with 19.72 in. dia, is rated to 30 hp. Products exhibit efficiencies to 97%.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Motorized Pulleys

Dual-Drive Pulley System suits bulk conveyor operations.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 05 Apr 2004 07:47:34 -0500

Motorized, head-pulley/tail-pulley system features self-lubricating gearbox and enclosed drive design, which eliminates pinch points that can cause personal injury. Pulley diameters range from 8.5-31.5 in. with powers ranging from 0.5-180 hp. Motorized pulleys are hermetically sealed and all internal electro-mechanical components run in continuous oil bath.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Motorized Pulleys