ThomasNet Industrial Newsroom -

Gearmotors have left, right, or dual output shaft.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Dec 2008 07:46:32 -0600

Including 1/12 hp, 115/230 V dual voltage, and 60/50 Hz dual frequency single phase permanent split capacitor motors, VWDIR33 AC Right Angle Gearmotors provide continuous torque ratings of 89-250 in.-lb. Integral gear reducers utilize hardened steel worm gearing and cast iron output gears, with ratios ranging from 37:1 to 1,205:1. Reversible units feature corresponding fixed output speeds of 40-1.5 rpm, and all-position foot mounting with 100 lb overhung load capability.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Right Angle Gearmotors | Fractional Horsepower Gearmotors

Linear Synchronous Motors suit large machining centers.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 20 Nov 2008 07:53:57 -0600

Offering peak forces up to 13,000 N with dead weight of 45 g, IDAM L2U Series compensates for any magnetic forces generated between motors and magnets. By using iron-core linear ac synchronous motor with 2 symmetrically opposed secondary parts, units maintain accuracy and minimize friction-induced heat generation. Reduced iron content in movable primary component further minimizes mass in 3-phase motors.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Linear Synchronous Motors | Synchronous Motors | Linear Motors

Brush Motor targets industrial handheld and portable tools.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 19 Nov 2008 07:42:40 -0600

Measuring 1.7 in. dia x 3.3 in. long, Model TGB1710 delivers 160 oz in. peak torque and 183 W continuous power, yet weighs 22 oz. Ruggedized brush design withstands vibration of portable tools, while low-inductance architecture of motor coil extends brush life. Motor also features smooth, controllable power due to zero cogging and hysteresis torque.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Brush Motors | DC Motors

Hybrid Stepper Motors feature step resolutions of 1.8°.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 21 Oct 2008 07:42:10 -0600

Suited for demanding industrial environments, MAE® Size 34 Stepper Motors enable accurate open loop control for positioning applications. Three models are available with holding torque of 770, 1,062, and 1,416 oz-in. Units feature single- or double-ended shaft extensions and high-temperature grade neodymium iron bore magnets. Incorporating stator insulators, top-to-bottom insulation system enables motors to withstand internal temperatures up to 130°C.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Hybrid Stepping Motors

AC Gearmotors deliver 50 lb-in. output torque.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 20 Oct 2008 07:44:40 -0600

Designed as Von Weise Drop-In Replacements, VWDIR14 Series parallel shaft gearmotors utilize 1/20 hp AC motors, which can be operated from 115 or 230 V, 60 or 50 Hz power sources. Permanent split capacitor AC motors and integral gear reducers are reversible and feature all-position face mounting with 50 lb overhung load capability. Available in 6 models, units offer gear ratios from 10:1 to 494:1 and corresponding output speeds from 1.81-4 rpm.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Reversible Motors | Permanent Split Capacitor (PSC) Motors | AC Motors | Fractional Horsepower Gearmotors | Parallel Shaft Gearmotors

Brush Motor provides high continuous power capacity.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 03 Oct 2008 07:39:53 -0600

Measuring 2 in. dia x 5.3 in. long, Model TGB2020 delivers up to 440 W and 425 oz-in. peak shaft torque. Unit feature rare earth magnets and high copper density, ironless coil, which provides heat dissipation and zero cogging. With max efficiency of 90%, motor is suited for driving low profile vehicles, power tools, and any load that requires small cross section. In blower and thruster applications, motor provides low frontal area, minimizing drag within air or liquid movers.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Brush Motors | DC Motors

AC Gearmotors have 400 lb overhung load capability.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 01 Oct 2008 07:36:19 -0600

Featuring gear ratios of 19:1, 28:1 and 56:1, VWDIR40 ½ hp gearmotors with backward compatibility offer corresponding output speeds of 92, 62, and 31 rpm, and continuous torque ratings of 287, 400, and 800 in.-lb. Drop-in replacements for VW40 gearmotors have split phase, open drip-proof AC motors and integral gear reducers with all-position foot-mounting. U.L. and CSA recognized units suit electromechanical pool covers and bleachers, compactors, can crushers, and conveyors.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Parallel Shaft Gearmotors | Split Phase Motors | AC Motors | Torque Motors

Right Angle DC Gearmotors are Von Weise drop-in replacements.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 22 Sep 2008 07:23:55 -0600

Series VWDIR23 wormed gear motors come in 6 standard 90 Vdc input models. With 37:1 to 525:1 gear ratios, corresponding fixed output speeds range from 90-3 rpm and output torques range from 34-250 in.-lb. U.L. and CSA approved units feature 1/10 or 1/20 hp permanent magnet dc motors with replaceable brushes, grease lubrication, and all-position mounting with left, right, or dual output shafts with 100 lb overhung load rating.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Fractional Horsepower Gearmotors | Right Angle Gearmotors | DC Gearmotors

Spindle Motors combine power and compact design.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 22 Sep 2008 07:23:47 -0600

Available with 150 kW (3,000 rpm) and 200 kW (2,000 rpm) rated output, Large Spindle Motors are based on AiS servo motor design and feature synchronous internal permanent magnet construction, hi-res encoder feedback, and standard amplifiers. Use of tandem control lets motors be operated on multiple smaller amplifiers that regenerate power back to line, conserving electrical energy. Products are suited for retrofit of large CNC machines that used dc or large induction motors.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Servo Motors | Spindle Motors

AC Motors suit general purpose applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 19 Sep 2008 07:44:39 -0600

OME Series AC motors are industrial-duty, 3-phase, 208-230/460 Vt motors available in 1-5 hp and speeds of 3600, 1800, and 900 rpm. Totally enclosed fan-cooled T-frame motors have cast iron frames with ribbed design for maximum cooling and feature class F insulation. They are inverter-duty capable with 5:1 speed turndown for variable torque applications and 2:1 speed turndown for constant torque use.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: AC Motors | Fan Cooled Motors | Machine Tool Motors | Three-Phase Motors

Brush DC Motors provide output power up to 9 W.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 19 Sep 2008 07:44:33 -0600

Available in 12, 16, and 22 mm frame sizes, Athlonix(TM) Motors feature coreless design with self-supporting coil and magnetic circuit. Units offer efficiency ratings approaching 90%, depending on motor load conditions. With maximum continuous torque up to 16.5 mNm and optimal angular acceleration, RoHS-compliant motors are suited for medical analyzers and electronic assembly that require constant pick-and-place operations during machining, assembly, and scanning.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: DC Motors | Brush Motors

AC Motor targets petroleum and petrochemical industries.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 15 Sep 2008 07:40:53 -0600

Baldor Reliance API 547 large AC industrial motor meets American Petroleum Institute's Specification 547 requirements and is designed for safe and reliable operation in severe duty applications. Suited for pump compressor and fan applications, it is available from 250-3,000 hp in 2-, 4-, 6-, and 8-pole speed configurations.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Pump Motors | Fan Motors | Compressor Motors | AC Motors

AC Gearmotors feature fail-safe disc brakes.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 15 Sep 2008 07:40:50 -0600

Available in 14 models with gear ratios from 27:1 to 750:1, Series VWDIR08 and VWDIR88 feature unidirectional, 1/10 and 1/20 hp shaded pole motors with clockwise rotation and 115 V, 60 Hz input. Parallel shaft units provide fixed output speeds from 2-60 rpm and output torques from 42-113 lb-in. Designed as Von Weise drop-in replacements, gearmotors are grease-lubricated with open or enclosed fan-cooled construction, face or foot mounting, and 150 lb overhung load rating.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Fractional Horsepower Gearmotors | Parallel Shaft Gearmotors

DC Gearmotor develops 70 lb-in. torque at 7.2 rpm.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 10 Sep 2008 07:40:42 -0600

Rated at IP52 for operation in harsh environments, Model MMP-PDSF80-12V GS-180-LS DC Gear Motor has output rated for 70 lb-in. continuous torque at 7.2 rpm and 100 lb-in. peak. Weighing 4.6 lb, gear motor measures 2.8 in. in dia, with 3.15 in. square gearbox, by 6.2 in. long, and has 10 x 27 mm keyed output shaft. Gearmotor requires 3.9 A to generate its full load torque, and comes with 4 M5 threaded screws, equally spaced 66.5 mm apart and accepts any 12 Vdc source.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Low Noise Gearmotors | Miniature Gearmotors | Precision Gearmotors

Parallel Shaft Gearmotors have 32:1 to 430:1 gear ratios.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 10 Sep 2008 07:40:40 -0600

Designed as Von Weise drop-in replacements, VWDIR83 permanent magnet gearmotors are available in 12 standard models, 6 each for 12 and 90 Vdc inputs. With fixed output speeds ranging from 6-93 rpm and output torques from 50 to 13 in.-lb, units feature 1/30 hp permanent magnet dc motors with replaceable brushes, grease lubrication, and all-position face mounting with 50 lb overhung load rating. Applications include peristaltic pumps, commercial floor care appliances, and door operators.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: OEM Motors | Fractional Horsepower Gearmotors | Permanent Magnet Motors

Gearmotors are designed as Von Weise drop-in replacements.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Sep 2008 07:35:24 -0600

Available in 13 standard models, VWDIR84 gearmotors feature output speeds from 6-85 rpm, torques from 50-600 in.-lb, and overhung load capability of 250 lb. Drop-in replacements for VW84 gearmotors have 0.75 in. output shaft diameter and built-in foot mounts. Three models are powered by dual voltage (115/230 V), dual frequency (60/50 Hz) permanent split capacitor 1/12 hp ac motor, while 10 standard dc models are driven by either 12 or 90 V permanent magnet dc motors.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Custom Gearmotors | Fractional Horsepower Gearmotors

Gearmotors are offered with various shaft configurations.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 25 Aug 2008 07:39:41 -0600

Available in 13 standard models with 4.5-100 rpm output speeds and torques ranging from 27-250 lb-in., Series VWDIR03 right angle gearmotors operate on 115 Vac, 60 or 50 Hz, or 115 Vdc. UL and CSA approved gearmotors are driven by universal motor that can be speed controlled with rheostat or light dimmer triac electronic control. Offered with choice of left, right, or double output shaft configurations, the 1/15 hp motor rotation is reversible.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Fractional Horsepower Gearmotors

Commercial Duty Gearmotors range from 1/30 to ½ horsepower.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Aug 2008 07:36:34 -0600

Including 75 standard gearmotor models for wide variety of commercial and light industrial applications, Von Weise Drop-In Replacements (VWDIR) fractional horsepower gearmotors feature output torque range of 12-800 in.-lb. DC models include 12 and 90 V permanent magnet motors as well as 115 V universal motors, while AC models are available with 115 and 230 V inputs in permanent split capacitor, split phase, shaded pole, and universal motor designs.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Fractional Horsepower Gearmotors | AC Motors | DC Motors | Permanent Magnet Motors | Permanent Split Capacitor (PSC) Motors | Split Phase Motors | Torque Motors

Reversible Gearmotor accepts any 12 Vdc source.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 13 Aug 2008 07:43:37 -0600

Requiring just 7.2 A at 12 Vdc to generate full load torque, Model MMP-TM55-12V GP52-025 develops 25 lb-in. continuous torque at 185 rpm and 213 lb-in. peak. Measuring 2.14 x 7.2 in. and weighing approximately 3 lb, compact, low noise unit has 12 x 25 mm keyed output shaft. Rated IP54 for operation in harsh environments, reversible dc gearmotor can be mounted with 4 face mount M5 threaded holes, equally spaced on 40 mm dia B.C.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Miniature Gearmotors | Low Noise Gearmotors | DC Motors

Drum Motor is suited for food processing applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 12 Aug 2008 07:40:00 -0600

Available with 3-phase motors and internal gearing system with no external moving parts, Drum Motor 127i reduces noise in light- to medium-belt conveyor applications. Internal gearing system is rated to 97% efficiency, while spring-loaded and labyrinth seals prevent contamination and oil loss. Able to operate in temperatures to 104°F, self-contained unit supports conveying speeds to 315 fpm with 1.0 hp and requires oil changes every 20,000 hr.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Drum Motors | Conveyor Motors