ThomasNet Industrial Newsroom -

Portable Receiver can validate optical modulation and power.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 27 Aug 2008 07:33:49 -0500

Capable of measuring 15 MHz to 1 GHz ±1 dB power from optical cable and providing 75 <font face='Symbol'>W</font> RF output to drive spectrum analyzers, FOS1000A 1000 MHz Optical Receiver can monitor and measure optical modulation index of optical carrier in percent/channel or percent total. It emulates typical wideband optical node used in high quality optical networks, and eliminates need for multiple instruments and optical systems analyzers when setting up, benchmarking, and maintaining transmitters.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Communication Systems and Equipment

Search for suppliers of: Optical Receivers

Video Receivers operate over multimode optical fiber.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 11 Aug 2008 07:46:09 -0500

Fiber optic Models FVR11 and FVR10 receive single baseband video channel as optical signal from up to 2.5 km, and convert signal back to baseband video for monitoring. Model FVR10 features manual gain adjustment, whereas Model FVR11 offers automatic gain control that adjusts changes in camera output that might degrade video quality.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Fiber Optic Receivers

Reference Receiver Module targets LAN/SAN testing.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 12 May 2008 07:35:47 -0500

Facilitating design and validation testing, 86116C Option 025 provides reference receiver capabilities for 100-G Ethernet and 16X Fibre Channel signals. Module works with 1,310 nm and 1,550 nm single-mode transmitters, and characteristically has 45 GHz optical and 93 GHz electrical unfiltered bandwidth. Used in 86100C DCA-J oscilloscope mainframe, unit helps engineers investigate, design, and verify performance of transceivers that terminate optical fibers for LANs and SANs.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Communication Systems and Equipment

Search for suppliers of: Optical Receivers | Fiber Optic Receivers

Photodiode and Receiver deliver 40G error-free performance.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 21 Feb 2008 07:43:18 -0500

Offering linearity with third order intercept point as high as 50 dBm, 40 Gbps photodiode and receiver feature differential GPPO RF outputs that enable reception of all pre-amplified and unamplified 40G modulation formats. Receiver package interfaces to commercial CDR/DEMUX modules, and products address several modulation formats: ASK, DPSK, and DQPSK. Receiver configurations include single, balanced, and dual detection schemes, with and without transimpedance amplification.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Communication Systems and Equipment
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Optical Receivers | Photodiodes

Transmitter/Receiver target high-definition video market.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 23 Jan 2008 07:45:26 -0500

Supporting HDMI rev1.3 requirements, P1TX4C-SX51 Transmitter Optical Subassembly and P1RX4C-SX51 Receiver Optical Subassembly enable single link that carries bi-directional communication in parallel to high-speed data. HDMI rev1.3 specifications allow for Deep Color support, which utilizes up to 16 bits per pixel, as well as true lossless audio playback through Dolby TrueHD and DTS-HD audio formats.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Video Transmitters | Optical Receivers | Fiber Optic Receivers | Fiber Optic Transmitters

MPEG-4 Set-top Boxes serve as multimedia hubs.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Jan 2008 07:28:20 -0500

Comprising various single- and double-tuner host set-top solutions, DCX series offers HD video and surround sound audio capabilities that enable reception of on-demand and interactive digital cable programming. Model DCX3400 includes DVR capabilities, and all models offer multimedia hub capabilities that enable stored content to be shared with other compatible devices. Along with MPEG-2 and MPEG-4 technologies, STBs incorporate 1 GHz tuners and DOCSIS® downstream channel bonding.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Television Receivers | Fiber Optic Receivers

Transmit and Receive Pair optimize 10GBASE LRM performance.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 06 Apr 2006 08:12:35 -0500

Designed to optimize performance of 10GBASE LRM modules, 1310 TOSA and linear ROSA 10Gbps transmit and receive pair exhibit typ OMA sensitivity of -17 dBm. LRM ROSA includes 10Gbps InP PIN photo-detector, transimpedance amplifier, and LC or SC optical barrel. ROSA has differential output and remains linear over input power range defined in LRM standard. Product is optimized to work with electronic dispersion compensation ICs to meet LRM module linear requirements.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Fiber Optic Transmitters | Subassemblies | Fiber Optic Receivers

Transmitter/Receiver carries KVM signals 3,300 ft.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 22 Aug 2005 09:03:15 -0500

Able to transmit PS/2, USB, Sun keyboard and mouse signals plus DVI or VGA video, fiber-optic KVME 1000 utilizes technology that combines all electronic input and output signals into one optical KVM signal. Transmitter and receiver convert all KVM signals into all supported formats, enabling use of keyboard, video, and mouse simultaneously at both local and remote ends of circuit. KVME 1000 also supports BNC stereo emitter audio signals.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Optical Receivers | Fiber Optic Transmitters

Safety Elements enable flexible perimeter guarding.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 12 Aug 2005 08:08:54 -0500

Non-contact fiber optic PICO-GUARD(TM) Points enable multiple emitter and receiver points to be arranged to create customized optical safety grid that meets Safety Category 4 requirements. Resistant to damage from moisture and debris, IP67-rated products operate with light and use no electricity. Safety elements with 12 mm polycarbonate threaded barrel have operating range of 1.5-6.4 m, whereas 30 mm stainless steel threaded barrel models operate over 8.5-28.7 m range.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Safety and Security Equipment
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Fiber Optic Receivers | Perimeter Guarding Systems | Fiber Optic Sensors

Transmitters and Receivers work at distances to 1,000 ft.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Aug 2005 08:08:57 -0500

Providing fiber-optic transmission of command signals and encoder feedback, TA821 Copper Reduction modules convert electrical encoder, hall sensor, and limit signals to optical signal and back into electrical signals. Products, mounted with motor and on linear stage, are available in 1-, 2-, and 4-axis units that operate on 5 Vdc and feature power-on status indicating LED. Modules measure 3.50 x 3.03 x 0.75 in. and are suited for motion control applications.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Fiber Optic Receivers | Fiber Optic Transmitters

Optical Receiver Systems operate at 2.5 and 10 Gb/s.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 06 Jun 2005 07:41:37 -0500

Capable of detecting multiple wavelengths, Optical Coherent Receiver Systems are intelligent transport systems compatible with ASK, (D) PSK, and FSK modulation formats. They provide sensitivity for both fiber and free-space applications in optical C and L bands. Units can also be used at other wavelengths, including 980, 1,064, 1,310 nm, and optical S band.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Optical Receivers

Optical PINFET Receivers offer adjustable sensitivity.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 01 Mar 2004 07:36:46 -0500

LDPF and LDPW series PINFET Optical Receivers integrate PIN photodiode and discrete transimpedance amplifier stage. Light is coupled into detector stage through multimode optical fiber pigtail that allows coupling with either single or multimode fiber systems. Sensitivity and dynamic range can be customized to meet user requirements. Equipped with automatic gain control, LDPW series provides dynamic range operation up to 0 dBm.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Optical Receivers

Portable Optical Receiver emulates wide-band optical node.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 13 Jan 2004 07:37:48 -0500

Microprocessor-controlled FOS-860A monitors and measures optical modulation index (OMI) of optical carrier. Capable of measuring OMI in percent, per channel, or total, all controls are front panel-accessible, and results are displayed on 2-line, 48-character, back-lit LCD. Unit features front panel BCD pushbuttons for channel loading and measures optical power in mW or dBmW within 1310 and 1550 nm optical windows in absolute or relative modes.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Optical Receivers

Transmitter/Receiver offer contact closure relay option.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 25 Nov 2003 07:36:51 -0500

Transmitter and Receiver Modules VT1101M and VR1100-CC can incorporate contact closure relay for alarm-event notification. Addition of relay allows device such as dome tamper switch or alarm event input to be added and its signal transmitted back to monitoring location, eliminating need for additional wiring. Modules support distances up to 2.5 miles without repeaters. Operating temperature is -40 to 74°C.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Sub-Assemblies suit 10 Gbps optical fiber systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 16 Oct 2003 08:17:29 -0500

Receiver Optical Sub-Assemblies optimize performance of 10 Gbps transceivers using electronic dispersion compensation. Multi-mode Model VSK10R07-06 incorporates photodetector with linear pre-amplifier for 1310 and 1550 nm systems. It features bandwidth of 8 GHz, sensitivity of -13 dBm, and dynamic range greater than 15 dB. Single-mode Model VSK10R09-06 operates at 1310 and 1550 nm and achieves sensitivity of -17 dBm, 19 dB dynamic range, and bandwidth of 8 GHz.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Optical Receivers | Subassemblies

Linear Receiver Module operates at 10 Gbps.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 Apr 2003 07:36:45 -0500

Model VSK10R05 receiver module combines photodetector with integrated pre-amplifier for operation at 9.9, 10.7, and 12.5 Gbps. Providing optical sensitivity of -19 dBm, optical overload of +2 dBm, and bandwidth of 10 GHz, receiver features MSA-compliant 17-pin surface mount small form factor package. In noisy optical environments, optical overload remains greater than 0 dBm at OSNR of 13 dB/0.1 nm. Module is targeted at applications using Electronic Dispersion Compensation.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Fiber Optic Receivers | Optical Receivers

Tranceivers are offered in high bandwidth versions.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Apr 2003 08:02:51 -0500

Para-Optix(TM) Transmitter/Receiver and Transceiver product family includes transceivers that mate to Para-Optix Cable Assemblies utilizing MPO-style connector. Products incorporate 850 nm Vertical Cavity Surface Emitting Lasers (VCSELs) for VSR applications. Transmitters/receiver, with 12 fibers, is targeted to SNAP-12 Standard, while transceiver incorporates 16-72 fibers. Data rates are offered from 2.7-3.4 Gb/s per channel, with demonstrated reach of up to 1.1 km.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Fiber Optic Transceivers | Fiber Optic Transmitters | Fiber Optic Receivers

Receiver Module suits fiber-optic telecommunications market.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 27 Mar 2003 07:36:15 -0500

Model 40R02 40 Gbps module incorporates waveguide photodetector with integrated pre-amplifier. Sensitivities approach -15 dBm, and typical noise current density is ~20 pA/rtHz. Unit features +2 dBm optical overload, bandwidth greater than 50 GHz and provides efficient operation at 43.5, 18, 12.5, and 10.7 Gbps. At 12.5 Gbps, it offers sensitivity of -17.5 dBm. Module comes in high-speed 14-pin butterfly package with single-mode fiber pigtail.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Optical Receivers

Optical Receivers improve link sensitivity by 3 dB or more.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 12 Nov 2002 09:08:06 -0500

Models DSCR405 and DSCR405ER are 15 dB InGaAs balanced photoreceivers for wavelengths from 800 to 1,650 nm with over 14 and 20 GHz bandwidths, respectively. They are targeted at digital telecommunications markets using 10 and 20 Gbps with FEC and RZ formats. Units feature small form-factor fiber-pigtailed package that is hermetically sealed and built to GR-468 standards.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Fiber Optic Receivers

Balanced Optical Receiver suits LIDAR applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 27 Aug 2002 08:28:35 -0500

Suitable for eye safe free space applications, Model R205M operates at 150 MHz with peak gain of 20 dB. Offered in compact hermetic package, balanced receiver option consists of matched InGaAs/InP photodiodes and low noise amplifier. When used in coherent-lightwave link designs, receiver eliminates laser relative intensity noise (RIN). It comes with choice of optical input connector and type K or dual GPPO/SMMP coaxial RF output.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Photodetectors | Optical Components | Optical Receivers