ThomasNet Industrial Newsroom -

Hermetic Feedthrough is used with fiber optic connectors.

info@productnews.com (ThomasNet News) — Thu, 23 Jul 2009 08:36:00 -0500

Hermetic Bulkhead Feedthru is designed for use with Souriau ELIO 38999 fiber optic connector line. It features insertion loss of less than or equal to 0.3 dB per interface and return loss less than or equal to 20 dB per interface and can be manufactured to support multi-mode 50, 62.5/125, or 100/140 µm fiber types. Compatible with aluminium, titanium, and SS, unit is designed to mate with aluminium or composite ELIO contacts and is available in jam nut or laser weldable configurations.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Feedthroughs

Hermetic Feedthroughs suit high-current applications.

info@productnews.com (ThomasNet News) — Thu, 28 May 2009 08:33:24 -0500

Compatible with variety of liquids and gases including refrigerants, oils, heat transfer fluids, and jet fuels, StudSeal(TM) hermetic feedthroughs transfer power into and out of sealed environments at operational loads up to 1,000 A and 15 kV. StudSeals typically consist of threaded rod on both sides of hermetic seal; other standard and custom solutions are available, such as crimp fittings and terminal-to-wire solutions occurring inside of epoxy and compression fittings.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mechanical Power Transmission

Search for suppliers of: Electrical Conductors | Feedthroughs

Assemblies combine multiple feedthroughs on single plate.

info@productnews.com (ThomasNet News) — Thu, 02 Apr 2009 08:40:22 -0500

Custom-designed and fabricated Portplate Assemblies come fully assembled with pre-tested multiple feedthroughs. Plates can house variety of connector densities and counts, as well as mating connectors and fiber optic bulkheads. Provided with or without connectors, assemblies offer full strain relief and are available in 6-48 in. dia sizes. Finished, ready-to-pump plates accommodate mixed configurations including those from Ductorseal®, Studseal(TM), Optiseal(TM), and Potcon(TM) product families.

This story is related to the following:
Electronic Components and Devices
Mechanical Power Transmission
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Terminal Assemblies | Feedthroughs | Electric Wiring Devices

Hermetic Feedthroughs eliminate leak paths.

info@productnews.com (ThomasNet News) — Mon, 26 Jan 2009 08:37:56 -0500

Available with aluminum, titanium, steel, brass, plastic, or low-out-gassing epoxy housings, Ductorseal® sealed wire and cable assemblies solve through-bulkhead conductor sealing problems by providing interconnecting harness in fully sealed and pre-wired hermetic feedthrough. They are available with various standard or custom wire bundles, and are epoxy-sealed to provide leak-free performance in operating environments from 1x10-10 Torr through 15,000 psi and 4 K (LHe) through 200°C.

This story is related to the following:
Mechanical Power Transmission
Electronic Components and Devices
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Feedthroughs | Hermetically Sealed Connectors | Electrical Cable Assemblies

SMT Feedthrus support operation through 25 GHz.

info@productnews.com (ThomasNet News) — Wed, 05 Mar 2008 07:43:55 -0500

Bell Pin(TM) surface-mount feedthrus are constructed with gold-plated Kovar base and center conductor fired in place with low-loss corning glass. Able to be used at J and K band frequency ranges, products are offered with .009 in. dia pin option and deliver 50 ohm performance. They work with lightweight aluminum or brass housings, mounting to bottom of package to create true surface-mountable parts. Parts also help reduce weight in microwave packages.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Feedthroughs

Feed-Through Connectors keep panels sealed.

info@productnews.com (ThomasNet News) — Mon, 17 Dec 2007 07:44:35 -0500

Constructed with metal design including M12x1 thread locking termination, M12 Feed-Through Connectors are available in 4, 5, and 8 gold-plated contacts with A-coding. Diameter of mounting hole is 20 mm with anti-rotation flats. When properly mated, feed-through adapters maintain environmental protection rating of IP67 at both panel and mating area on each side of adapter.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Mechanical Power Transmission

Search for suppliers of: Metric Connectors | Feedthroughs

Multi-Pin Feedthroughs suit limited space applications.

info@productnews.com (ThomasNet News) — Fri, 30 Mar 2007 07:45:57 -0500

Featuring 9 gold-plated pins in straight-through pin-to-pin design, Subminiature-C Feedthroughs can be installed in 1.33 in. CF metal seal and ISO-NW16KF elastomer seal flanges. Ultra High Vacuum units are hermetically sealed and electrically insulated in stainless steel shell using glass-ceramic bonding technology. Air and Vacuum side connectors are fitted with captured stainless steel socket head screws for securely locking to mating feedthroughs.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Feedthroughs

Hermetic Feedthroughs offer safe air side connectivity.

info@productnews.com (ThomasNet News) — Tue, 02 Jan 2007 07:55:13 -0500

Available in 40 kV and 50 kV, Hermetic High Voltage Feedthroughs each have 10 A current carrying capacity. Units include weldable, ConFlat®, and ISO flange-mounted installation configurations. Corona-resistant cable assembly utilizes molded silicone body and silicone insulated cable in lengths of 8 ft. Built for extreme conditions, feedthroughs feature temperature capability of -269 to 450°C and are guaranteed to be leaktight to leak rate less than 1 x 10-10 atc-cc/sec.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mechanical Power Transmission

Search for suppliers of: Electrical Feedthroughs | Feedthroughs

Feedthrough enables safe high power connectivity.

info@productnews.com (ThomasNet News) — Thu, 10 Aug 2006 08:10:49 -0500

Featuring copper conductor, .250 in. Power Plug Feedthrough and Cable Assembly handles up to 25 kV and 100 A. It is available in weldable, ConFlat®, and ISO flange-mounted installation configurations of 1-4 pins. Cable assembly utilizes custom plug or boot to mate to feedthrough and 6 AWG tin-plated copper conductor cable with silicone insulation. Feedthrough has temperature capability of -269 to 450°C, with leak rate of less than 1 x 10-10 atm-cc/sec.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Feedthroughs

Feedthroughs provide electrical isolation and hermetic seal.

info@productnews.com (ThomasNet News) — Tue, 15 Oct 2002 07:38:51 -0500

Single conductor thermocouple feedthroughs, offered as loop type or spade type, are available in Chromel, Alumel, Iron, Constantan, Tungsten 5% Rhenium, or Tungsten 26% Rhenium. Three and five pair spade type thermocouples are offered in Type K, Type J, and Type E. They come with air-side plugs and vacuum-side connection hardware. Circular connector thermocouples are available in Type K materials. All feedthroughs are available as weldable or flanged units.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Feedthroughs