ThomasNet Industrial Newsroom -

Post Amplifiers drive devices with CML and PECL inputs.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 04 Jan 2008 07:17:39 -0500

Featuring high-sensitivity Loss-Of-Signal (LOS) circuits suited for detecting small input signals, SY88343HL and SY88289HL connect to transimpedance amplifiers in fiber optic module, quantize their linear signal, and output them in low noise CML-level waveforms. ICs amplify input signals as small as 4 mVpp and are optimized to operate over range of data rates from 155 Mbps to 3.2 Gbps. They offer chatter-free open collector TTL LOS outputs with adjustable LOSlvl threshold.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Integrated Circuits (IC) | Amplifiers

Post Amplifiers detect wide input signal range.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 24 Dec 2007 07:30:16 -0500

Incorporating loss-of-signal circuit optimized to detect input signal range of 20-140 mVpp, Models SY88303BL and SY88307BL low power post amplifiers operate from 155 Mbps to 3.2 Gbps with signal amplitudes ranging from 10-1,800 mVpp and feature CML-level outputs. SY88305BL and SY88309BL have same characteristics but feature signal detect circuit and PECL-level outputs. ICs come in ultra-small 16-pin MLF® or 10-pin EPAD-MSOP packages.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Amplifiers | Integrated Circuits (IC)

Vector Modulator operates from 500 MHz to 2 GHz.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 31 Oct 2007 07:44:39 -0500

Model SA-39-AR Integrated Digitally Controlled Pin Diode I & Q vector modulator, amplifier, and negative gain equalizer offers simultaneous 60 dB and 360° of dynamic attenuation and phase control with accuracy of 0.06 dB and 0.1° at any CW frequency. Across entire band, VSWR is 1.8:1 with +30 dB of RF gain held within ±1 dB window to output 1 dB compression point of +17 dBm. Device switches from state to state in 1.0 µs.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: I & Q Modulators | Equalizers | Amplifiers

Flow Electronics feature modular architecture.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 15 Nov 2006 07:45:43 -0500

CAT Series accepts up to 3 different circuit boards to offer options for signal conditioning, amplification, and transmission. Microprocessor-based devices include CAT1 intelligent loop powered 4-20 mA transmitter with linearization; CAT2 signal conditioner with various output options and optional High and Low flow rate alarms; and CAT3 intelligent signal conditioner with optional alarms and linearization that provides pulse output scaled per unit of flow.

This story is related to the following:
Test and Measuring Instruments
Electronic Components and Devices Sponsored by: Lumera Corporation -
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Flow Transmitters | Signal Conditioners | Amplifiers

Wireless Signal Booster suits residences and small offices.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 10 Nov 2006 07:46:38 -0500

Preventing oscillation and harmful interference, Model Z1900 wireless repeater improves indoor signal strength with coverage up to 2,500 sq ft, enabling use of cell phones and PDAs indoors. Product automatically adjusts signal levels, and works with most wireless carrier networks that offer voice or wireless data services in 1900 MHz. Booster features network-protecting technology and supports CDMA, GSM, EVDO, and UMTS.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors
Test and Measuring Instruments

Search for suppliers of: Amplifiers | Signal Instruments

Photodetector Amplifier minimizes electrical noise levels.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 07 Nov 2006 07:47:51 -0500

Packaged in TO-5 can, ODA-5W-100M is suited for low-light-level tasks where electrical noise levels can affect photodiode signal if detector and amplifier are separate components on PCB. Photodetector amplifier combination offers 100 Mohm gain and 0.100 in. dia active area. Detector visible wavelength responsivity is 40 V/µW at 660 nm while frequency response is 1 KHz with dark offset at ±1 mV and dark offset noise at 5 mV rms.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Photodetectors | Amplifiers

Amplifiers incorporate background-lit LCDs.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 12 Sep 2006 07:51:04 -0500

Along with auto-detect mode, Millimar C1208 and 1216 feature displays with analog and 2-line digital readout. Status lamps indicate warning and tolerance limits, and 2 features can be displayed simultaneously. Millimar C1216 also has analog output with programmable output voltage and resolution from 1 µin. with measuring range of ±0.008 in. Other features include static measurements ±A, ±B, and all combinations as well as dynamic measurement of max, min, max-min, max+min, and mean.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Amplifiers

Servo and Spindle Hardware promote position accuracy.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 20 Jun 2006 08:05:12 -0500

Modular Level-Up αi series includes spindle amplifiers, servo motors, power supplies with continuous output up to 100 kW, and 1-3 axis servo amplifiers with HRV4 control and minimal heat generation. Servo amps use single fiber optic cable to connect up to 16 servo axes, and all units utilize energy-saving power source regeneration. Servo motors utilize permanent magnet rotor, while motor-mounted, 16 million ppr encoders feature error correction learning functions.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices Sponsored by: Lumera Corporation -
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Constant Voltage Power Supplies | Servo Amplifiers | Amplifiers

Modular Amplifier simplifies industrial automation tasks.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 22 May 2006 08:02:58 -0500

Using interference-proof, stable measurement techniques, digiCLIP products enable carrier frequency modules to measure quantities such as force, strain, torque, and pressure. Up to 99 units can be clipped together, each with internal DSP that computes and combines measurement signals within milliseconds. Capable of self-monitoring signal conditioning, products are based on modular amplifier system that uses TEDS technology so users can adapt different sensors.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Amplifiers

Audio Subsystem features both digital and analog inputs.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 15 Mar 2006 07:05:25 -0500

LM4934 Boomer® stereo audio subsystem integrates audio amplifiers, volume control, mixer, power management control, and 3D stereo sound-enhancement technology into 3.3 x 3.9 mm, 42-bump micro SMDxt package. Unit offers I2S digital and 3 analog inputs, multiplexer IC, 25 mW mono earpiece output, and separate line out to drive external audio devices. LM4934 routes and mixes stereo and mono inputs into multiple, distinct output modes using I2C compatible interface.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors
Communication Systems and Equipment

Search for suppliers of: Amplifiers | Communication Components & Subsystems

Amplifiers come with shop air conservation system.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Nov 2005 07:06:14 -0500

Column and CAG amplifiers are available with optional Auto-Air package, which conserves energy during everyday air gaging operations. Auto-Air(TM) automatic air valve switches on and off during air gaging applications and non-gaging time. Upon application of air tool, system senses pressure build-up and automatically switches air flow from minimal mode back to normal. Regulated air pressure stays active for predetermined amount of time after tool is removed from part or master gage.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Material Handling and Storage
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Amplifiers | Automatic Control Valves | Air Control Valves

MEMS Driver suits rotating MEMS microengines.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 Mar 2005 07:40:45 -0500

High-voltage, multi-channel Model 9070 integrates Super µDriver(TM) Software, one 2375 MEMS Driver Amplifier providing 4 output channels, and two 2414A-GS arbitrary waveform generators with built-in sequencers and programmable synchronous outputs. System fulfills need for characterization, dynamic performance evaluation, and reliability assessment for orthogonal comb drives, cantilevered beams, and other electrostatically controlled MEMS devices and actuators.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Amplifiers | Microelectromechanical Systems (MEMS)

Audio Power Amplifier conserves board space.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 17 Feb 2004 07:51:21 -0500

Filter-free, Class-D, mono TPA2010D1 comes in Wafer Chip Scale Package measuring 1.45 x 1.45 mm and offers lead and lead-free ball options. Device provides 2.5 W power output and offers efficiency of 88%, reached with 8 ohm speaker, reducing power wasted as heat and low operation/shutdown current of 2.8 mA and 0.5 µA, respectively, saves battery. Applications include cell phones, smart phones, and personal digital assistants.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Amplifiers | Power Amplifiers | Audio Amplifiers

Motor Amplifier drives linear or rotary devices.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Oct 2002 07:37:44 -0500

Available in a small box and for use with all standard Nanomotion motors, AC4 provides motor power for maximum of four elements (up to HR4 Motors). Amplifier is 50% smaller than previous version and accepts 12 V input. AC4 is available with analog input (±10 V) or SPI digital input.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Amplifiers

Amplifier/Function Generators handle high voltages.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Jul 2002 12:12:09 -0500

Models 609E-6-FG and 10/10B-FG will operate as dc stable high voltage amplifiers or function generators. They provide sources for externally amplified signals, adjustable high-level dc voltages, and adjustable high-voltage sine, square, or triangle waveforms. Both work over range of 0.2 Hz to 10 kHz. As amplifiers, 609E-6-FG is rated for 0 to ±4 kV and 10/10B-FG is rated for 0 to ±10 kV dc or ac. Both are protected against over-voltage and over-current conditions.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Function Generators | Amplifiers

Gage Amplifier has Windows-based software.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 20 Jun 2002 07:58:31 -0500

Model 767 has Pentium®-based computer with Windows NT/2000 operating system. Software provides operators with screens that display gaging and machine compensation information. SPC package includes X-Bar, histogram, trend, capability, range, standard deviation, and measurement history charts, as well as tool compensation frequency, tool wear indicator, Pareto diagram, C, Np, P, and U charts. Software allows gage application programs and formulas to be created and edited.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors
Test and Measuring Instruments

Search for suppliers of: Gages | Amplifiers

Signal-Conditioner Module offers dual channels.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 07 May 2002 08:07:09 -0500

Test Friendly(TM) Dynamics Model 4120 provides 40kHz signal amplification, non-linearity correction, and cold-junction compensation for conversion of millivolt output of thermocouple into 0 to 10 V signal, linearly proportional to temperature. Programmable voltage reference is provided for internal self test and automated user calibration functions. Each channel can be configured for use with any of 8 thermocouples with 12 temperature ranges from -100 to +1750 deg C.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Thermocouples | Signal Conditioners | Amplifiers

Amplifier powers two channels.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 22 Apr 2002 07:45:39 -0500

Model 439 Two-Channel Attenuator-Amplifier has gain range of 118 dB in one dB steps from -78 to +40 dB. Gain is set by front panel rotary encoder and displayed on LCD. Each channel's gain can be set independently or they can be set together. Power amplifier is included to drive stereo headphone for audiometric testing or other use. Clock noise is eliminated by putting microprocessor into sleep mode when not programming gain.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Amplifiers

Transducer Amplifier for load cells and pressure sensors.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 19 Apr 2002 07:44:20 -0500

CMJ-CEB has bi-polar output of ±5 volts, plus 4 to 20 mA and 0 to 10 V outputs, all field selectable using board jumpers. It is available in single board or DIN rail mount versions, or in environmentally sealed enclosure, and can be used in conjunction with M2S relay board for high-low level control, with relay contact closures.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Transducer Amplifiers | Amplifiers

Motor Amplifier fits company's motors.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 Mar 2002 15:47:13 -0500

AB1A 3U Amplifier Board comes in 3U board level product, making it suitable for OEMs who prefer to package electronics in racks or boxes. It accepts +/- 10 V signal from any servo controller or manual joystick input, and has standard 48 pin interconnect for easy integration to backplane.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Servo Amplifiers | Amplifiers