ThomasNet Industrial Newsroom -

Gas Turbine Package suits offshore/onshore applications.

info@productnews.com (ThomasNet News) — Tue, 22 Sep 2009 08:29:21 -0500

Able to produce more than 40 megawatts, LM6000 Enhanced Package is designed for reliable operation in remote locations and under extreme conditions. System includes LM6000 aeroderivative gas turbine coupled with centrifugal compressor for mechanical drive duty. Optimized for reliability and availability, package operates at more than 42% efficiency and offers Dry Low Emissions combustor that limits NOx emissions to 15 ppm at 15% O2.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Gas Turbines

Rooftop Wind Turbine can be used in urban, suburban areas.

info@productnews.com (ThomasNet News) — Thu, 14 May 2009 08:30:54 -0500

Designed for on-site power generation by commercial and industrial users, WindCube® uses wind tunnel effect (Bernoulli Principle) to capture and amplify wind for optimized production of kilowatt-hours (kWh). Single (60 kW) and dual (120 kW) systems are available in rooftop or tower-mounted design and can capture wind energy as low as 5 mph. Featuring 22 x 22 x 12 ft framework, modular design accommodates electrical requirements.

This story is related to the following:
Mechanical Power Transmission
Green & Clean

Search for suppliers of: Wind Turbines

Control System increases wind turbine output.

info@productnews.com (ThomasNet News) — Thu, 07 May 2009 08:29:36 -0500

WindBOOST(TM) control system upgrade is designed to increase output of 60 Hz 1.5sle wind turbines. It enables turbine blades to spin faster and can increase turbine output, by 100 kW, to 1.6 MW. By generating more power from same unit - up to 4% increased annually, turbine operators can increase profitability. Upgrade also offers control technology for optimum rotational speed as well as remote capability to turn control system on/off at turbine level.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission
Green & Clean

Search for suppliers of: Turbine Controls | Wind Turbines

Medium-Voltage Switchgear is designed for wind turbines.

info@productnews.com (ThomasNet News) — Wed, 22 Apr 2009 08:31:46 -0500

Operating at 36 kV, NX Plus C Wind has compact design that can be readily accommodated in wind turbine towers. This gas-insulated switchgear installs in base of wind turbine tower and can fit through its door. In most applications, wind turbine with its generator supplies electrical energy at 690 V. Downcircuit converter matches frequency to wind farm's network and ensures stable voltage level. Transformer steps this up to 30 or 33 kV to minimize transmission losses.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Green & Clean
Mechanical Power Transmission

Search for suppliers of: Medium Voltage Switchgear | Wind Turbines

Control System optimizes wind turbine grid integration.

info@productnews.com (ThomasNet News) — Fri, 03 Apr 2009 08:38:08 -0500

WindINERTIA technology allows wind turbines to provide inertial response for large, short-duration frequency deviations. Utilizing mechanical inertia of turbine rotor, it enables operating turbine to increase power output by 5-10% of its rated power, over wide range of wind speeds. Duration of power increase is several seconds and benefits grid by allowing time for other non-wind power generation assets to increase power production during large under-frequency events.

This story is related to the following:
Mechanical Power Transmission
Controls and Controllers
Green & Clean

Search for suppliers of: Turbine Controls | Wind Turbines

Wind Turbine derives energy from low-/medium-speed wind.

info@productnews.com (ThomasNet News) — Wed, 18 Mar 2009 08:35:24 -0500

Featuring 101 m rotor diameter and swept area of 8,000 m², SWT-2.3-101 is designed to derive power from low and medium wind speeds. This 2.3 MW wind turbine is equipped with 49 m rotor blades, which are cast in one-piece in closed process that eliminates any weaknesses associated with glue processes. Rugged structural design, automatic lubrication systems, internal climate control, and generator system without slip rings contribute to reliability.

This story is related to the following:
Mechanical Power Transmission
Green & Clean

Search for suppliers of: Wind Turbines

Mobile Power Unit provides up to 34 megawatts.

info@productnews.com (ThomasNet News) — Tue, 20 Jan 2009 08:31:36 -0500

Incorporating LM2500 aeroderivative gas turbine with Brush 170ER generator, Model TM2500+ achieves full power in less than 10 min with 41.1% efficiency and noise level of 88 dBa. It can be applied in 60 or 50 Hz applications and can operate on natural gas or liquid distillate fuels. Water injection can be used to achieve NOx levels down to 25 ppm. It is packaged on 2-trailer system with top-mounted air inlet filter and exhaust assemblies.

This story is related to the following:
Mechanical Power Transmission
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Power Units | Power Generators | Gas Turbines

Wind Power Appliance lessens building electricity costs.

info@productnews.com (ThomasNet News) — Mon, 16 Jun 2008 07:35:50 -0500

Connected to building power supply, Windspire® vertical axis wind turbine offsets electricity use and, at times, runs electricity meter backwards. Styling helps unit blend into surroundings, while technology maximizes energy conversion, regardless of wind speed. Integrated, plug 'n produce(TM) design includes generator, inverter, wireless performance monitor, and tilt-up monopole. Unit can produce about 2,000 kWh of electricity in 12 mph average winds.

This story is related to the following:
Green & Clean
Mechanical Power Transmission

Search for suppliers of: Wind Turbines

Adjustable Augmenter maximizes harnessed wind velocity.

info@productnews.com (ThomasNet News) — Wed, 23 Apr 2008 07:45:03 -0500

Utilizing canvas panel system, Adjustable Augmenter funnels and accelerates wind into Multi-Axis Turbosystem, increasing power output. System includes side wall dump panels and top panel lift systems that minimize pressure spikes in augmenter during extreme wind events. Side panels swing open when sufficient pressure differences exist between inside and outside of augmenter, while top panel lift system allows suspension cable to lift above next panel to vent air velocity to outside of augmenter.

This story is related to the following:
Green & Clean
Mechanical Power Transmission
Test and Measuring Instruments

Search for suppliers of: Wind Turbines

Engines are suited for power generators and AG pumps.

info@productnews.com (ThomasNet News) — Fri, 14 Jul 2006 08:06:49 -0500

Featuring cylinder heads that perform at 20,000 hr life-cycle span, Endura(TM) integrated systems provide on-site, continuous-duty power utilizing multi-fuel energy sources. They can produce electricity in tandem with, or independent of, utility grid systems or direct shaft power. Products are suited for fielded power generation units as well as low-emissions agricultural (AG) irrigation pumps.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mechanical Power Transmission

Search for suppliers of: Natural Gas Engines | Industrial Engines | Engines

Scroll Expander produces up to 1 kW quiet power.

info@productnews.com (ThomasNet News) — Wed, 05 Apr 2006 08:11:14 -0500

Scroll expander is designed for expansion generators used to convert waste heat energy from exhaust gases or liquid cooling systems of internal combustion engines, fuel cells, and solar collectors. Unit offers expansion ratio of 4.6:1 and displacement of 12 cc/rev. Scroll features magnetic coupling that eliminates leakage path for working fluid, weighs 20 lb, measures 11.6 x 8.2 x 9.1 in., and provide pulse-free operation with 50 db noise level.

This story is related to the following:
Mechanical Power Transmission
Architectural and Civil Engineering Products

Search for suppliers of: Gas Expanders | Scrolls

Wind Turbines come in 2.5 and 3 megawatt versions.

info@productnews.com (ThomasNet News) — Wed, 12 Oct 2005 07:19:43 -0500

Featuring permanent magnet synchronous generator and modular converter with full power conversion, Wind Turbines are based on force flow optimized bedplate, which joins all nacelle components on common structure. Machines rated at 2.5 megawatt feature 100 m rotor diameters, while 3 megawatt units offer 90 and 94 m rotor diameters. Pitch regulation system with power/torque control and use of drive train damper mitigate loads of larger rotor.

This story is related to the following:
Green & Clean
Mechanical Power Transmission

Search for suppliers of: Wind Turbines

Wind Turbine is designed for low-wind areas.

info@productnews.com (ThomasNet News) — Tue, 11 Oct 2005 07:10:40 -0500

Rated at 1.5 megawatt, 1.5xle model features LM 40 rotor blade with 82.5 m rotor diameter that is suited for class III or weaker wind applications. Extreme cold-weather package provides for nominal operation at temperatures as low as -30°C and in survival mode without operation at temperatures as low as -40°C. Available tower heights are 58.7, 80, and 100 m, and tallest version is also available in solid steel form with no concrete foundation.

This story is related to the following:
Green & Clean
Mechanical Power Transmission

Search for suppliers of: Wind Turbines

Turbine Oil Conditioner can be scaled to requirements.

info@productnews.com (ThomasNet News) — Wed, 28 Sep 2005 07:13:25 -0500

Turbo-TOC® KL Series prevents oxidation and viscosity breakdown that may compromise turbine lubricant effectiveness. Combining coalescing technology with electronic touch controls, systems utilize K1100 pre-filter, K2100 coalescer, and K3100 separator to remove harmful water, particulates, and other contaminants. Along with pump pressure, element differential pressure, and oil temperature graphics, display also relays water removal data.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Turbine Oil Conditioners

Steam Turbines range from 1-600 hp.

info@productnews.com (ThomasNet News) — Tue, 07 Jun 2005 07:54:24 -0500

Single-stage Series 400RT is available in sizes from .75â�"450 kW with pressures to 700 psig and temperatures to 825°F. Dual exhaust outlets are symmetrically located and can be used individually or jointly. Idealube lubrication system automatically provides flood, splash, and mist lubrication when required. Monolithic wheel design is standardized and includes stainless steel milled style blading, metallurgically combined with alloy steel wheels.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Steam Turbines

Gas Turbine Combustion System reduces NOx emissions.

info@productnews.com (ThomasNet News) — Mon, 07 Feb 2005 08:30:14 -0500

Dry Low NOx combustion system reduces NOx emissions for company's 12 MW class 10-2 gas turbine from 25 to 15 ppm. Emissions level is guaranteed over operating conditions spanning 50-100% of load and ambient temperature range of -20° to +100°F. It requires no catalytic hardware minimizing number of combustion parts. Combustion chamber incorporates 4 GE5 premixed pilot burners and includes flame detector, flashback thermocouples, and humming detection system for full flame control.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Gas Turbines

Gas Turbine suits industrial applications in 6 MW range.

info@productnews.com (ThomasNet News) — Mon, 13 Dec 2004 07:54:18 -0500

Cold-end-drive, single-shaft Taurusâ"¢ 65 generator suits cogeneration, combined cycle, and other power generation applications. Generator set is rated at 6000 kWe for continuous duty at ISO conditions. It features 13-stage axial compressor with 15:1 pressure ratio that produces air inlet flow of 19.4 kg/sec, and utilizes 3-stage turbine with shrouded stage-3 turbine blade. SoLoNOâ"¢ combustion system reduces formation of NOx and CO, eliminating post-combustion clean-up devices.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mechanical Power Transmission

Search for suppliers of: Cogeneration Systems | Gas Turbine Engines | Turbine or Turbo Generators | Gas Turbines

Miniturbine suits industrial power generation applications.

info@productnews.com (ThomasNet News) — Wed, 25 Jun 2003 08:21:08 -0500

Based on aero-derivative natural gas fired turbine, ENT 400 is designed for applications where its exhaust gas can be used for direct heating and drying applications. Product provides up to 6 MMBtu/hr of heat as direct exhaust at 27,450 lb/hr at 1013ºF and 396 kW of continuous electric power. System is fully integrated in compact container and includes all controls and utility switchgear.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Gas Turbines

Precision Turbine incorporates governed design.

info@productnews.com (ThomasNet News) — Fri, 12 Jul 2002 07:40:08 -0500

Dotco® 12R91 series precision turbine allows tool to idle and provides full power under load. Pre-loaded bearings maintain stability in spindle to allow for smoother cuts. Available with 3 mm and 1/8 in. collets, 65,000 rpm rear exhaust governed tool suits applications that previously used 100,000 rpm non-governed tools. It is available in models with 2 and 4 ft overhose to direct exhaust away from work area.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Microturbines | Compressed Air Turbines

Gas Turbine offers improved efficiency.

info@productnews.com (ThomasNet News) — Tue, 11 Jun 2002 08:31:16 -0500

Built upon Frame 6FA gas turbine technology, Model PG6111FA offers output increase to 75.9 megawatts and heat rate improvement of 2.7% over previous model. Combined-cycle service provides 117.7 megawatt output with 54.7% efficiency. Firing temperature is rated to 2420°F and pressure ratio is 15.6. DLN-2.6 combustion system is capable of 15 ppmvd NOx. Turbine suits a variety of installations, including combined heat and power and cogeneration.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Gas Turbines