ThomasNet Industrial Newsroom -

Pre-Engineered Panels aid deployment of drive systems.

info@productnews.com (ThomasNet News) — Wed, 11 Nov 2009 08:39:36 -0500

Available from 7.5-75 hp at 230 Vac and 7.5-150 hp at 460 Vac, NEMA3R and NEMA12 rated Drive Panels include L300P Series inverter suited for pump, fan, or other applications in indoor or outdoor environments. Base model features AC input line reactors, thermostat controlled cooling fans with filters, and terminal for user connection to power, motor, and control circuits. Standard models add input power disconnects and fusing. Standard with Bypass model is also available.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission

Search for suppliers of: Pump Drives | Motor Drives | Drive Components

Diesel Hybrid Electric Powertrain provides all-wheel drive.

info@productnews.com (ThomasNet News) — Wed, 28 Oct 2009 08:34:09 -0500

Configurable for specialized military and commercial applications, 4-wheel Q-Force features SCADA system, hybrid control system that minimizes battery size through optimized charge controls and regenerative braking, and advanced traction motor/transmission system. In one configuration, diesel engine produces 75 hp, while electric motor provides 133 hp, and power train yields 5,463 lb-ft of torque after reduction.

This story is related to the following:
Mechanical Power Transmission
Controls and Controllers
Green & Clean

Search for suppliers of: Powertrain Components | Motor Drives | Electric Motor Drives

Magnet Drive System meets NEMA Premium and EPAct standards.

info@productnews.com (ThomasNet News) — Wed, 14 Oct 2009 08:33:05 -0500

Equipped with WISE insulation system, W Magnet Drive System(TM) incorporates W Magnet Drive inside motor, which is controlled by CFW11 variable frequency drive rated 380-480 V and 20-200 hp. Motor, rated at 460 V and 15-200 hp, is fitted with NdFeB magnets inserted inside rotor, instead of conventional aluminum alloy squirrel cages. CFW11 drive used with W Magnet Drive System uses vector control technology algorithm, which enables control without use of encoder/position sensor.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission
Green & Clean

Search for suppliers of: NEMA Frame Motors | Variable Frequency Drives (VFD) | Motor Drives

Low Harmonic Drives eliminate distortion.

info@productnews.com (ThomasNet News) — Tue, 06 Oct 2009 08:36:56 -0500

Featuring modular design, VLT® Low Harmonic Drives eliminate current distortion at source by performing real-time analysis and actively imposing currents, as needed, to restore and ensure optimized sine waves from power supply grid. Units come in power ranges of 132-630 kW high overload and 160-710 kW normal overload, and voltage range of 380-480 Vac, 50-60 Hz. Offered in IP 21/NEMA1 or IP54 enclosure, drives continuously regulate network and load conditions without affecting connected motor.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission

Search for suppliers of: Variable Frequency Drives (VFD) | Motor Drives

Brushless DC Drives are suited for BDLC motors.

info@productnews.com (ThomasNet News) — Tue, 15 Sep 2009 08:31:07 -0500

Chassis and NEMA 4/12 enclosed 720 Series BLDC drive, and BLM700 Series drive and display with 1/8 DIN panel mount design, accept 120 Vac input and generate up to 160 Vdc armature voltage. They include adjustable min and max armature voltage, current limit, and separately adjustable accel and decel functions. Other functions incorporated into units are inhibit, brake, and fwd/rev, while onboard diagnostics are enabled via local LED or remote signal.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission

Search for suppliers of: Motor Drives | DC Drives

Micro Drive controls AC motors up to 30 hp.

info@productnews.com (ThomasNet News) — Wed, 02 Sep 2009 08:33:26 -0500

Available in M5 frame size measuring 11.5 x 6.5 x 9.8 in., VLT® Micro Drive covers 3-phase, 380-480 Vac, 25-30 hp range. Variable frequency drive offers true side-by-side mounting without derating. Flying start feature maximizes uptime, while electronic thermal relay eliminates need for external motor protection. Additional features include serial communications via RS-485 Modbus RTU and FC protocols, detachable Local Control Panel, IP20 protection, and built-in RFI filter.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission

Search for suppliers of: Motor Drives | Variable Frequency Drives (VFD)

AC to DC Converters come in air- or liquid-cooled versions.

info@productnews.com (ThomasNet News) — Mon, 24 Aug 2009 10:57:29 -0500

Available in 1-, 3-, and poly-phase circuit configurations, AC/DC converters support voltage range from 50-5,000 V and current from 30-30,000 A. Along with voltage, current, and thermal feedback, options include snubbers, laminated BUS, DC filer capacitors, and output bus bar. Standard versions are available, along with custom models that can be made to end-user specs, for applications that include power supplies, UPS, introduction heating, and welding.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices
Controls and Controllers
Mechanical Power Transmission
Test and Measuring Instruments

Search for suppliers of: Industrial Uninterruptible Power Supplies (UPS) | Silicon Controlled Rectifiers (SCR) | DC To AC Inverters | Motor Drives | Silicon Controlled Rectifier (SCR) Power Controllers | Uninterruptible Power Supplies (UPS) | Frequency Converters | Electric Power Converters | AC To DC Converters | Converters | IGBT Controls | Power Factor Controllers | AC To AC Converters

Vector Drive provides abrasive waterjet positioning control.

info@productnews.com (ThomasNet News) — Wed, 12 Aug 2009 08:30:04 -0500

Engineered to support OMAX abrasive waterjet machines, Brushless Vector Drive for permanent magnet synchronous motors drives 50-pole motor, providing smooth precise motion control. Drive is self-learning, and makes subtle, automatic corrections to retain optimal performance. Precision linear scales provide close-loop servo control and have 1 micron resolution to ensure precise motion.

This story is related to the following:
Mechanical Power Transmission
Controls and Controllers

Search for suppliers of: Motion Drives | Motor Drives | Vector Drives

Belt Conveyors feature rotatable drives.

info@productnews.com (ThomasNet News) — Thu, 23 Jul 2009 08:35:59 -0500

Featuring low-profile design, Automation Series Conveyors have Pivot rotatable drives that can be positioned to avoid product on conveyor belt or obstructions caused by integrated machines. To change position, users loosen 2 set screws, rotate drive, and retighten screws. Timing belt inside guard transfers torque from motor to conveyor's drive pulley. Capable of belt speeds up to 400 fpm, Pivot drive package is compatible with any QC Industries ac or dc gearmotors.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Controls and Controllers
Mechanical Power Transmission

Search for suppliers of: Belt Conveyors | Motor Drives | Conveyor Drives

Compact Servo Drive measures only 136 x 84 x 26 mm.

info@productnews.com (ThomasNet News) — Fri, 10 Jul 2009 08:33:54 -0500

Based on MotionChip(TM) DSP technology, ISD720 embeds motion controller, drive, and PLC functionality in open-frame unit. It offers 20 A continuous and 49.5 A peak current ratings, performs position, speed, or torque control and works in single- and multi-axis or stand alone configurations. Suited for distributed and coordinated control of brushless, dc or linear motors up to 720 W, drive accepts incremental quadrature encoders and digital Halls as position feedbacks.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission

Search for suppliers of: Motor Drives | Servo Drives

Flat Motor offers high nominal torque of up to 0.83 mNm.

info@productnews.com (ThomasNet News) — Fri, 26 Jun 2009 08:28:13 -0500

Measuring Ø10 x 12.5 mm, EC 9.2 Flat motor has 10 mm OD that includes protective cover to protect against contact and as mounting aid during installation of motor. It provides stall torque of up to 1.29 mNm and is equipped with 8-pole Neodymium permanent magnet and preloaded ball bearings. Available with or without Hall sensors, drive meets ISO 13485 medical technology quality standard and suits applications where space is at premium.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission

Search for suppliers of: Motor Drives | Medical Equipment Device & Instrument Motors

Brushed Servo Drives accept bus voltage from 24-180 Vdc.

info@productnews.com (ThomasNet News) — Thu, 14 May 2009 08:30:57 -0500

Designed for use with brushed DC permanent magnet servomotors, A-Series servo drives come in 5 different continuous current output ratings of 2, 4, 8, 12, or 15 A and peak current of three times continuous. Control loops are all analog with digital drive status and fault detection, while inputs and outputs can be set for high or low response. Functioning in either velocity or current mode, drive is commissioned using potentiometers for tuning and tachometer for velocity feedback.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission

Search for suppliers of: DC Drives | Motor Drives | Servo Drives

Sterilizable Motors can be used with or without gearheads.

info@productnews.com (ThomasNet News) — Tue, 12 May 2009 08:43:08 -0500

Designed for high speed medical applications of up to 90,000 rpm, EC Size 5 and EC 13 drives feature low-noise and low-vibration operation. Size 5 motor and gearhead measures ½ in. OD, with shaft of 0.125 in., and motor has servo mount. EC13/GP13 version has 13 mm OD, 3 mm shaft, and flange mount with 3 face side threads. Both models offer sterilizability of 500 autoclave cycles (typ) and are available equipped with Hall sensors or sensorless as well as with 3 different windings.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission

Search for suppliers of: Motor Drives | Medical Equipment Device & Instrument Motors

DC Power Inverters range from 100-3,300 V.

info@productnews.com (ThomasNet News) — Tue, 12 May 2009 08:43:05 -0500

With current rating of 50-3,000 A, DC Power Inverters incorporate full and half bridge circuit configurations and feature air or liquid cooling, making them suited for force driving power electronics. Additional applications include motor drives, battery chargers, power supplies, UPS systems, and alternative energy, such as solar and windmill converters.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Controls and Controllers
Mechanical Power Transmission

Search for suppliers of: Power Inverters | Motor Drives | Power Supply Systems | Battery & Battery Charger Power Supplies | DC To AC Inverters | Inverters | Uninterruptible Power Supplies (UPS) | DC To AC Power Supplies | Motor Starters

Variable Frequency Drive features modular design.

info@productnews.com (ThomasNet News) — Tue, 05 May 2009 08:30:06 -0500

Available with 400-2,500 hp control unit, CFW11-M Inverter is supplied with all electrical and fiber optic connecting cables, panel rails, and fuses installed. Controls provide 3-phase, 380-690 Vac induction motor control with IPS1 interface card. To help prevent heat buildup, drive includes monitoring and protection functions, including IGBT overload protection feature, which monitors junction temperature and generates failures or alarms.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Variable Frequency Drives (VFD) | Motor Drives | Three-Phase Inverters | Frequency Inverters

Intelligent Servo Drive reaches up to 600 W peak power.

info@productnews.com (ThomasNet News) — Mon, 20 Apr 2009 08:29:40 -0500

Measuring 65 x 58 x 19 mm, Model IBL3605 embeds motion controller, drive, and PLC in one unit and can control brushless, step, DC, or linear motors up to 180 W. Unit can be used as network drive in distributed motion systems using CAN/CANopen interface, or as standalone motion controller for single-axis control. Motion programming is done from CANopen master via PC/PLC using appropriate motion library, or at drive level using built-in motion controller and EasyMotion Studio platform.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission

Search for suppliers of: Servo Drives | Motor Drives | Linear Drives | DC Drives

OEM Motor Drive provides positioning control.

info@productnews.com (ThomasNet News) — Fri, 17 Apr 2009 08:38:15 -0500

Measuring 54 x 28 x 9 mm, Model EPOS2 36/2 controls brush DC motors as well as brushless EC motors, and is suited for single-axis and multiple-axis applications of miniature size. Plug-in module can be operated as speed controller or current controller in addition to position controller. Providing 36 V, 2 Amp operation, drive is designed to command and control within CANopen network, but can also communicate via USB or RS232 interface.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission

Search for suppliers of: Motion Controllers | Motor Drives | DC Drives | Motor Controllers | Speed Controls | Positioning Controls | Motion Controls | Current Controls

Stepping Motors/Drives suit motion control applications.

info@productnews.com (ThomasNet News) — Tue, 14 Apr 2009 08:30:56 -0500

Available in NEMA 17, 23, and 34 sizes, SureStep Stepping Motors include bi-polar models with output torques from 61-1,291 oz-in. Units feature pigtail cable with locking connector and 200 steps/revolution. Advanced Programmable SureStep Drives offer software-selectable resolution up to 51,200 steps/revolution and power capability up to 10 A/phase. Available for drives and motors, unregulated linear power supplies offer full load outputs of 32, 48, and 70 Vdc.

This story is related to the following:
Mechanical Power Transmission
Controls and Controllers

Search for suppliers of: Stepping Motors | Motor Drives | Stepping Motor Drives

Variable Frequency Drive features modular design.

info@productnews.com (ThomasNet News) — Wed, 01 Apr 2009 08:34:40 -0500

Available as kit for cubicle assembly or as completely housed unit with integrated 6-pulse or multi-pulse front-end rectifiers, Model CFW11-M features U11 modular power unit, which can be configured to motor power by paralleling up to 5 units. Ranging from 400-2,500 hp, control units provide 3-phase 380-690 Vac induction motor control with IPS1 interface card and connecting cables. Monitoring and protection functions help prevent heat buildup for extended motor life.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Three-Phase Inverters | Motor Drives | Variable Frequency Drives (VFD)

Motor Speed Control Drive has point of use design.

info@productnews.com (ThomasNet News) — Tue, 17 Mar 2009 08:30:35 -0500

Compact, variable speed SCR drive TightDrive(TM) attaches directly to permanent magnet DC electric motors and gearmotors up to 1/6 hp and offers 20:1 speed range with maximum output of 90 V. It is housed in durable aluminum extrusion that offers NEMA 1 (IP 30) protection and heat dissipation, while speed is controlled with combination on/off switch and speed potentiometer. Designed for 115 V 50/60 Hz operation, unit comes complete with 3 ft power cord and NEMA 5-15P plug.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission

Search for suppliers of: Adjustable Speed DC Drives | Adjustable Speed Motor Drives | Motor Drives