ThomasNet Industrial Newsroom -

Timing Belts have tensile strength ranging from 190-1,400 N.

info@productnews.com (ThomasNet News) — Tue, 16 Sep 2008 07:45:24 -0500

Offered in belt widths of 6, 10, 16, 25, and 32 mm, AT3 endless timing belts have no weld zone, and feature minimum and maximum belt lengths of 720 and 1,701 mm, respectively. Tension member comes in steel/SS. Optional nylon facing on tooth side helps reduce coefficient of friction, while zero backlash pulleys are available for bidirectional belt drives. Belts are suited for small power drives requiring high tooth sheer strength as well as high speed applications.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Endless Belts | Timing Belts

Endless Belts feature convertible profile technology.

info@productnews.com (ThomasNet News) — Fri, 12 Sep 2008 07:36:23 -0500

Available as open ended or welded endless belts, ATN timing belts come in regular AT10, AT10 tooth profile with ½ in. tooth pitch, and regular AT20 tooth pitches. Belt profiles can be assembled by hand utilizing accompanied mounting screws and inserts, while belt length and profile location can be chosen by increments of one tooth. Profiles can be made of any material to fit application (also material mix), and can also be assembled and disassembled without removing belt from machinery.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Endless Belts | Timing Belts

Non-Marking Timing Belt minimizes dust generation.

info@productnews.com (ThomasNet News) — Thu, 10 Apr 2008 07:34:06 -0500

Constructed of high flex plastic over hardened fiberglass cord, TruMotion® Timing Belt is available in 2 mm GT, 3 mm GT, 3mm HTD, 5 mm HTD, .080 in., 1/5 in., and 3/8 in. pitches. Tooth surfaces have outer layer of nylon for wear resistance and quiet operation. Operating from -40 to 220°F, belt is corrosion- and abrasion-resistant, making it suitable for office automation, medical equipment, laboratory equipment, and DC stepper/servo devices.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Timing Belts | Plastic Belts

Timing Belts feature polymer-free nylon tooth facing.

info@productnews.com (ThomasNet News) — Thu, 13 Dec 2007 07:49:11 -0500

Providing full tooth-to-pulley contact, PowerGrip® TruMotion(TM) Timing Belts feature durable facing that minimizes noise and dust. Cream-colored polymer compound body can withstand extreme high and low temperatures ranging from -40 to +220°F. Fiberglass tensile cords ensure resistance to elongation. Compliant with RoHS, belts are suited for ATMs, cash registers, money counting machines, coin sorting, copiers, fax machines, printers, and medical equipment.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Timing Belts

Timing Belt has 15 mm pitch design.

info@productnews.com (ThomasNet News) — Thu, 31 May 2007 07:33:07 -0500

ATS 15 timing belts are designed for power transmission and linear drive applications that require high tensile strength and flexibility. They are available in 25, 32, 50, 75, 100, and 150 mm belt widths and come in open-ended 50 or 100 m rolls, welded or in truly endless technology. Tension members are available in steel and stainless steel.

This story is related to the following:
Mechanical Power Transmission

Connection System speeds timing belt assembly on machinery.

info@productnews.com (ThomasNet News) — Fri, 18 May 2007 08:09:43 -0500

Designed for T10 and AT10 pitch timing belts, Mechanical Connection System allows for access to shafts and pulleys without disassembling machinery parts. Finger spliced ends of timing belt are prepared to be clamped together with connecting kit hardware, which consists of carbon fiber reinforced polyamide connecting plates and tooth inserts, including screws.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mechanical Power Transmission

Search for suppliers of: Industrial Automation Connectors

Polyurethane Timing Belts are offered with weld-on profiles.

info@productnews.com (ThomasNet News) — Wed, 28 Mar 2007 09:08:45 -0500

Steel, stainless steel, and Kevlar® reinforced timing belts are available with injection molded profiles constructed of polyurethane materials in several durometers. Selection of profile style is determined by type of product to be conveyed and general machinery design. While 3,000+ stock profiles are available, company also supplies custom designs and configurations with integrated metal components such as plates, threaded inserts, screws, and magnets.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Timing Belts

Polyurethane Timing Belts suit wide range of applications.

info@productnews.com (ThomasNet News) — Mon, 08 Jan 2007 07:50:05 -0500

Available in straight-tooth, offset-tooth, or helical styles, Polyurethane Timing Belts suit linear motion, product conveyance, and power transmission applications. Steel-cord reinforced belts come in 3 configurations: open-end rolls in 325 ft lengths; welded or jointed belts made from roll material cut to length and spliced; and endless types made from long continuous cord with no splice or welding. To combat corrosion, Kevlar cord belts are available for high humidity applications.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Timing Belts | Transmission Belting

Timing Belts feature bifilar tension member arrangement.

info@productnews.com (ThomasNet News) — Fri, 03 Feb 2006 04:52:31 -0500

Truly endless (BFX) polyurethane timing belts utilize bifilar design that represents tension member arrangements with left hand and right hand lay. Tension members alternate to prevent formation of lateral forces, balancing timing belts for true tracking. Bifilar technology minimizes friction forces, lending to positioning accuracy in belt drives. It also improves pitch stability by minimizing deviation of timing belt materials.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Urethane Belting

Timing Belt Backing resists temperatures from -40 to 158°F.

info@productnews.com (ThomasNet News) — Wed, 25 Jan 2006 07:10:32 -0500

Made of cellular rubber, red colored LINAFOAM is available in thicknesses of 6, 10, and 12 mm. Possessing high coefficient of friction and elasticity, polyurethane foam is resistant to abrasions, cuts, and tears. It also has sound-absorbing, and shock- and noise-dampening qualities.

This story is related to the following:
Mechanical Power Transmission
Non-Industrial Products

Search for suppliers of: Belt Backing

Convertible Profiles enable flexible, precise operation.

info@productnews.com (ThomasNet News) — Wed, 21 Dec 2005 07:08:32 -0500

With change of profile set-up, ATN® connection technology allows different size goods to be conveyed with same timing belt. Profiles, fastened to timing belt via nylon, brass, or stainless steel inserts, can be converted, interchanged, or reconfigured with hand tools. Allowable tensile load for ATN 10 and ATN 12.7 tooth pitch polyurethane timing belts is up to 337.2 lb, and convertible profiles can be attached in increments of one tooth.

This story is related to the following:
Mechanical Power Transmission
Services

Search for suppliers of: Profiles

Timing Belts feature .080 pitch.

info@productnews.com (ThomasNet News) — Tue, 06 Dec 2005 07:07:23 -0500

Made of Kevlar-reinforced polyurethane, Series A6B16-D offers positive, non-slip power transmission without vibration, chatter, or backlash. Double-sided tooth action enables belts to wind between pulleys to synchronize shaft rotations. Capable of operating in temperatures from 0-180°F, and intermittently to 248°F, belts are available in widths of 1/8, 3/16, ¼, and 3/8 in. with 132-500 grooves/belt and pitch lengths from 10.56-40.00 in.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Timing Belts

Timing Belts provide synchronous control of drives.

info@productnews.com (ThomasNet News) — Tue, 06 Dec 2005 07:07:23 -0500

Offered in ¼, 5/16, and 3/8 in. widths, Series A 6G3, A 6B3, and A 6R3 feature .200 in. pitch and molded teeth on one side for positive power transmission without slip, vibration, or backlash. Small pitch belts can wind around number of small pulleys to permit multifunction operation in synchronizing shaft rotations. With 20-590 grooves and pitch lengths from 4-118 in., belts come in polyurethane with polyester cord, polyurethane with Kevlar cord, and neoprene.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Timing Belts

Spliceable Timing Belt Stock has 60 teeth per foot.

info@productnews.com (ThomasNet News) — Tue, 06 Dec 2005 07:07:23 -0500

Made of nylon-covered, fiberglass-reinforced neoprene, A 6R3-C timing belt stock can be spliced to suit designs where nonstandard endless belts are not available. It comes in 3 belt widths and operates continuously in temperatures from -30 to +185°F. Produced with 1/5 in. pitch and trapezoidal teeth on one side, product provides positive, non-slip power transmission without vibration, tool chatter, or backlash. It can also wind between pulleys to synchronize shaft rotations.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Timing Belts

Timing Belts and Pulleys minimize noise and vibration.

info@productnews.com (ThomasNet News) — Thu, 14 Jul 2005 08:19:02 -0500

Constructed of abrasion-resistant polyurethane and steel or stainless steel tension members, ARC-POWER PLUS belts are available as open-ended, spliced and welded endless, and truly endless. They provide 100% tracking in both running directions without flanges. Based on overlapping tooth arrangement, smooth interaction with idler and tensioners running on toothed side of timing belt eliminates tooth jumping.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Timing Belts | Timing Belt Pulleys

Timing Belt has teeth on both sides.

info@productnews.com (ThomasNet News) — Tue, 12 Nov 2002 09:08:09 -0500

Suited for serpentine applications, NSW polyurethane timing belt offers timing-teeth on both sides. Double-Sided belt is built with continuous wound steel reinforcement and responds well to stress. Resistant to abrasion and flex fatigue, NSW belt also resists moisture, grease, oil, and gasoline, as well as ultraviolet light, ozone, and hydrolysis.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Timing Belts | Endless Belts

Timing-Belt Kit allows on-site installation.

info@productnews.com (ThomasNet News) — Mon, 21 Jan 2002 07:42:03 -0500

ATN® mechanical connection system facilitates rapid belt assembly and disassembly directly at drive set-up. Finger spliced ends have clamping hardware consisting of polyamide inserts, steel plates, and screws. Allowable tensile load for ATN 10 and ATN 12.7 tooth pitch polyurethane belts is up to 337.2 lbs. Kit is available for 50 mm and 100 mm wide belts.

This story is related to the following:
Mechanical Power Transmission