ThomasNet Industrial Newsroom -

Gigabit Interface Converter can plug/expand fiber networks.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:43:04 -0500

Suited for telecom operators, Geebic WS-G5485U/D-AO GBIC enables bi-directional transmission on older switch models without SFP ports. It turns 1 Gb circuit into 2 Gb circuit using 4 bi-directional GBICs, by deploying existing fiber. Transceiver helps users employ same optical fiber for both transmission and reception functions, which allows network to free up bandwidth for other applications. Utilizing GBIC ports, unit accelerates implementation of FTTx.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Communication Systems and Equipment
Computer Hardware and Peripherals

Search for suppliers of: Optical Transceivers | Communication Converters | Fiber Optic Converters | Interface Converters

Interface Converter offers operating speed of 10 Mbps.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Jul 2008 07:29:30 -0500

Model 6765 is high speed, 4-channel Logic-to-Fiber Interface Converter that translates 4 input/output logic pairs into 4 fiber pairs, resulting in total of 8 fiber optic connections. It features user selectable fiber light ON polarity, ST fiber connectors, and logic test points for signal monitoring. Powered from 5 Vdc, circuit board is suited for embedded applications.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Communication Systems and Equipment
Computer Hardware and Peripherals
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Fiber Optic Converters | Interface Converters | Circuit Boards

Interface Converter offer operating speeds of 1.5 and 20 Mbps.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 04 Apr 2008 07:33:06 -0500

Model 4149 high speed ruggedized Fiber-to-RS485/422/232 interface converter offers operating speeds of 1.5 Mbps for RS232 to fiber conversion and 20 Mbps for RS485/422 to fiber conversion. Operating from -40 to +85°C, it features protection circuitry on all receivers and transmitters for both RS232 and RS485/422 interfaces. Unit can be powered from wide input range of 9-36 Vdc, and from 4.5-9 and 18-72 Vdc voltage ranges for other models.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Communication Systems and Equipment
Computer Hardware and Peripherals

Search for suppliers of: Fiber Optic Converters | Interface Converters

Converter Switches deliver Gigabit fiber connectivity.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 03 Jan 2008 06:27:43 -0500

By using industrial-grade Magnum(TM) CSG14 Extended SX Converter Switches on both ends of multi-mode connection, it is possible to upgrade multi-mode fiber to Gigabit and maintain existing fiber cable transmission distances to 2,000 m. Solution, comprised of high-speed flexible edge-of-the-network industrial Ethernet media converter and switch, includes 2-port 10/100/1000 copper switch and Gigabit fiber port configurable to support any multi-mode or single-mode Gb fiber connector type.

This story is related to the following:
Communication Systems and Equipment
Computer Hardware and Peripherals
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Fiber Optic Switches | Ethernet Switches | Industrial Ethernet Switches | Fiber Optic Converters | Communication Converters | Media Converters

Media Converter gives users ability to control bandwidth.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 23 Nov 2007 07:32:50 -0500

Model TC3240 10/100M 4-port Switching/Bridging Fiber Optic Ethernet Media Converter converts or connects 10/100Base-TX (UTP) networks to 100Base-FX (Fiber Optic) networks. Password-protected unit provides 10/100 Mbps Auto-Negotiation, automatically adapts to full or half-duplex mode, and includes built-in switch that enables distances up to 100 km without additional hardware. Industrial hardened version is also available for harsh environments.

This story is related to the following:
Computer Hardware and Peripherals
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Communication Systems and Equipment

Search for suppliers of: Media Converters | Fiber Optic Converters

GigE to Fiber Optic Converter extends Ethernet connections.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 24 Sep 2007 08:07:21 -0500

Combining 1,000 Mbps speed of Gigabit Ethernet (GigE) with EMI/RFI noise immunity and electrical isolation of fiber optic cable, EKI-2741 Series Gigabit Industrial Ethernet Media Converters enable GigE connections spanning up to 70 miles. All units include Link Fault Pass-through, which allows cable breaks or power failures to be signaled to attached devices. Supplied in DIN-rail mount metal chassis, series features dual 12-48 Vdc power inputs and 3,000 V power line surge protection.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Communication Systems and Equipment
Computer Hardware and Peripherals

Search for suppliers of: Fiber Optic Converters | Ethernet Adapters

Serial to Fiber Converters have RS-232/422/485 interface.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 24 Sep 2007 08:06:56 -0500

Available with DB9 or terminal block interface options, RUS-115 and RUS-125 series can integrate serial and multi-mode or single-mode fiber networks to provide reliable solution for industrial Ethernet environment. Vibration- and shock-resistant products automatically detect serial baud rate and can extend transmission distance up to 2 km over multimode fiber and up to 120 km over single mode fiber. Transmission speeds reach 115.2 kbps for RS-232 and 500 kbps for RS-422/485.

This story is related to the following:
Test and Measuring Instruments
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Communication Systems and Equipment
Computer Hardware and Peripherals

Search for suppliers of: Signal Converters | Fiber Optic Converters | Communication Converters

Universal Controller aids continuous flow isotope ratio MS.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 19 Jul 2007 07:36:59 -0500

Designed for GC, LC, and elemental analyzers coupled with isotope ratio mass spectrometers, ConFlo IV Universal Interface enables immediate switching between up to 3 sample preparation devices. It includes smartEA(TM) mode, which allows automated pre-evaluation and adjustment of sample gas intensities. Along with flexible, computer controlled auto-dilution of sample and reference gases, software also controls stand-by and start-up of Thermo Scientific TRACE GC and Flash EA modes.

This story is related to the following:
Chemical Processing and Waste Management
Computer Hardware and Peripherals
Test and Measuring Instruments
Communication Systems and Equipment
Controls and Controllers

Search for suppliers of: Sample Preparation Equipment | Interface Modules | Adaptive Controls | Automation Controllers

Media Converters withstand corrosive environments.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 27 Feb 2007 07:49:47 -0500

Suited for use in shipbuilding and marine industries, PSI-MOS Profibus Fiber-Optic media converters feature conformal-coated printed circuit boards for protection against salt water, moisture, and dust. Devices are approved for use in UL Class 1, Division 2 hazardous locations where volatile flammable materials are normally found and contained, but can become hazardous through abnormal conditions.

This story is related to the following:
Computer Hardware and Peripherals
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Communication Systems and Equipment

Search for suppliers of: Media Converters | Fiber Optic Converters

Media Converter allows network expansion via fiber optics.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 27 Nov 2006 07:46:45 -0500

Designed to convert 1000Base-T to 1000Base-SX/LX signals, 3301 Gigabit Ethernet Media Converter expands network through gigabit fiber optic connection, extending single mode fiber link up to 20 km. Devices feature LC and SC connector formats in multi- and single-modes, and can be installed stand-alone or mounted on media converter chassis. Supporting packets up to 10 KB, series features auto-negotiation and flow control function on RJ-45 copper port.

This story is related to the following:
Computer Hardware and Peripherals
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Communication Systems and Equipment

Search for suppliers of: Media Converters | Fiber Optic Converters

Electrical-to-Optical Converter features low-profile design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 01 Nov 2006 07:46:14 -0500

Offered in 850 nm multimode and 1,310 nm singlemode versions, single-channel Model J724 allows fast timing and logic-level signals to be transported via fiber optic levels. Packaging enables E/O transition to be located wherever convenient, and adjustable inputs are compatible with TTL, LVTTL, ECL, NIM, and most other common logic levels. Converter is intended for use with 9/125 micron singlemode fiber, but is also usable with 62/125 micron multimode fiber.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Computer Hardware and Peripherals
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Electric Converters | Fiber Optic Converters

Ethernet Fiber Media Converter helps build fiber links.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 06 Oct 2006 07:45:54 -0500

Supplied in IP31-rated, 70 x 30 x 89 mm aluminum case, JetCon1301 Industrial 10/100Base-TX to 100Base-FX Multi-/Single-Mode fiber media converter can operate in switching converter or pure converter modes. Store-and-forward technology, implemented in switching converter mode, filters out abnormal packets to maintain network performance. In pure converter mode, unit only converts signal between copper and fiber port. Solution supports 10/100Base-TX auto MDI/MDI-X and auto negotiation.

This story is related to the following:
Computer Hardware and Peripherals
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Communication Systems and Equipment

Search for suppliers of: Media Converters | Fiber Optic Converters

Data Converters feature protective optical isolation.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 21 Sep 2006 07:49:40 -0500

Available for RS-232 and RS-422/485 data circuits, I-linx stand-alone optical isolators in industrial DIN rail mount cases offer 2,000 V protection. Converters change RS-232 format data signals to RS-422 for increased range, or RS-485 for increased range and multi-drop capability. Model FOSTCDRI converts RS-232, RS-422, or RS-485 to transmit over fiber optic cable, which allows range up to 2.5 miles.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Optical Isolators | Fiber Optic Converters | Data Converters

Fiber Optic Multiplexers target emission monitoring systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 19 Jul 2006 08:06:09 -0500

Designed to multiplex CEMS 4-20 mA and 0-10 Vdc output signals at coal-fired power stations, Fiber Optic Converters monitor sulphur dioxide, nitrogen oxides, and particulate matter. Providing bi-directional communications, Series 2Mxx sends and receives up to 8 analog or digital signals over pair of fiber optic cables. Conversion of analog signals to fiber overcomes application issues such as EMI/RFI, lightning strikes, and ground loop problems.

This story is related to the following:
Computer Hardware and Peripherals
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Fiber Optic Converters | Fiber Optic Multiplexers

AS-Interface Cable Converter installs in seconds.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 29 Mar 2006 07:05:08 -0500

Featuring one-part construction, VAZ-2T1-FK AS-Interface Flat-to-Round-Cable Converter is suited for use in narrow and low-profile cable channels as well as other space-critical locations. Product installs in under 1 min in most applications and is designed for use where AS-Interface and 24 Vdc external power need to be on one M12 connector. Products are suited where AS-Interface drives with motor starters are used and for connecting AS-Interface sensors.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Communication Systems and Equipment

Search for suppliers of: Cable Adapters

Media Converters facilitate fiber-to-copper extensions.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 17 Feb 2006 07:06:23 -0500

Elinx EIR and EIS series enable users to convert to and from fiber-to-copper installations through hostile RFI/EMI environments. They can also extend distances up to 1.2 miles with multi mode fiber and up to 12.4 miles with single mode fiber. Rugged EIR series comes in industrial DIN rail-mount package, while commercial EIS models come in desk-, wall-, or rack-mountable packages with power supply. Both versions offer options to convert 10/100Base TX signals to 100Base FX.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Communication Systems and Equipment
Computer Hardware and Peripherals

Search for suppliers of: Fiber Optic Converters | Media Converters

Converters enable low-noise transport of logic signals.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 21 Jul 2005 09:03:38 -0500

Electrical-to-Optical Converter, Model J720 and Optical-to-Electrical Converter, Model J730 convert logic levels to fiberoptic media for low-noise transport up to kilometers, with link jitter below 10 ps rms. Model J720 is powered by logic-level input, and Model J730 requires +12 V supply, user-furnished or from wall-plug power adapter. Model J730 provides digital logic output with risetime below 750 ps. Both use ST-connectorized 62/125 micron multimode fiber.

This story is related to the following:
Computer Hardware and Peripherals
Communication Systems and Equipment
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Test and Measuring Instruments

Search for suppliers of: Fiber Optic Converters | Electric Converters | Signal Converters

POL Converters are suited for densely populated boards.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Jul 2005 07:52:15 -0500

Occupying board area of 2.14 in.², open-frame PTHxx040W series features output voltage adjustment and Auto-Track(TM) power sequencing. Model PTH12040W has output current rating of 50 A and 8-14 V input voltage range, while PTH04040W has 60 A rating and input range of 2.95-5.5 V. Series is Point-of-Load Alliance (POLA)-compliant and employs switching frequency of 1.05 MHz to achieve full load conversion efficiencies to 96%. Both models deliver up to 250 W.

This story is related to the following:
Communication Systems and Equipment
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Converters | Communication Converters

Fiber Optic Converter suits control cabinet applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 04 Nov 2004 07:45:25 -0500

Model PSI-MOS transmits fiber optic data for serial communication interfaces and bus systems. By converting electrical copper-based signals to glass or polymer fiber technology, it allows isolation of Interbus, Profibus, Modbus, DeviceNet, CANopen, RS-232, and other RS-485 networks. Onboard diagnostics provide information about signal quality on fiber optic path. If failure occurs, each module disconnects affected bus segment to prevent transmission of corrupted data.

This story is related to the following:
Communication Systems and Equipment
Computer Hardware and Peripherals
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Test and Measuring Instruments

Search for suppliers of: Fiber Optic Converters | Signal Converters

Converter Pair acts as data transceiver.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Nov 2004 07:48:11 -0500

LTX-5510 Electrical/Optical - Optical/Electrical converter pair digitizes analog input signal to 12 bit precision, along with 4 auxiliary digital inputs, and transmits data over Gbit fiber optic link. LTX-5510R receives transmitted data and reconstructs 5 signals at far end of link. Transmitter has selectable input ranges, ±1 or ±5 V, and input impedances may be set to 1 Megohm or 50 ohm. Overall system bandwidth is dc to 12.5 MHz.

This story is related to the following:
Communication Systems and Equipment
Computer Hardware and Peripherals
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Fiber Optic Transceivers | Fiber Optic Converters