ThomasNet Industrial Newsroom - Automatic ID

Handheld Scanner suits 1D barcode applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 30 Jun 2009 08:34:59 -0400

Able to read all common 1D barcodes, IDM140 has compact design that is ergonomically constructed for everyday use. It reliably reads poorly printed or damaged codes, eliminating the need to manually input data, and supports multiple interfaces - USB, PS/2, and RS232 TTL - within one unit. Areas of use include non-industrial, general-purpose applications within office and factory as well as warehouse and logistics environments.

This story is related to the following:
Computer Hardware and Peripherals
Automatic ID Sponsored by: Mag-Jestic -

Search for suppliers of: Hand-Held Scanners | Barcode Scanners

Wireless System locates assets in facilities and yards.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 23 Jun 2009 08:27:37 -0400

Using DASH7 technology based on ISO-compliant active RFID, Real-Time Locating System incorporates battery-operated, hockey puck sized Location Markers, which are placed anywhere in facility or yard and communicate their reference points to assets equipped with ST-632 active RFID asset tag. RFID tag collects and transmits identity and nearby reference point to SmartChain® software, which calculates tag's location and displays it on site map of customer's facility.

This story is related to the following:
Labels, Tags, Signage and Equipment
Automatic ID Sponsored by: Mag-Jestic -
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!

Search for suppliers of: Active & Passive RFID Tags | Radio Frequency Identification (RFID) Systems | Asset Tracking Systems

Vector Signal Analyzer changes frequencies in 250 µs.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 23 Jun 2009 08:27:36 -0400

Model 2820A RF Vector Signal Analyzer provides 40 MHz signal acquisition bandwidth with frequency range of 400 MHz to 4 GHz or 400 MHz to 6 GHz. Unit can be controlled via front panel or remotely by PC, with data transferred to PC for analysis via USB bus at speeds over 100 Mbps. Phase noise is below 140 dBc/Hz at 00 kHz offset on 2 GHz carrier, while signal acquisition synchronization jitter is less than or equal to 250 ps. Unit is able to analyze 3GPP Release 7, HSPA+ signals.

This story is related to the following:
Test and Measuring Instruments
Automatic ID Sponsored by: Mag-Jestic -

Search for suppliers of: Signal Analyzers | RF Analyzers

Printer features up to 14 thermal transfer print heads.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 22 Jun 2009 08:25:45 -0400

Customizable ThermalPak(TM) Traversing System is suited for use on variety of horizontal-form-fill-seal and IV bag forming machines that produce multiple lanes and multiple rows of packages per cycle. With 300 dpi resolution, it can print fixed and variable text, graphics and multiple bar code formats, and each print head can print at speeds up to 9.84 in./sec. Servo-driven linear ball screw actuator helps achieve traversing speed of up to 15.35 in./sec.

This story is related to the following:
Labels, Tags, Signage and Equipment
Automatic ID Sponsored by: Mag-Jestic -
Computer Hardware and Peripherals
Printing and Duplicating Equipment

Search for suppliers of: Barcode Printers | Thermal Transfer Printers

Ring-Shaped Passive RFID Tag is designed for gas cylinders.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 22 Jun 2009 08:25:43 -0400

Suited for identifying gas cylinders either individually, in whole shipments, on back of trucks, or in pallets, ring-shaped RFID metal tag can be installed on any cylinder shoulders either mechanically or by using industrial turnbuckle. Standard size is 32 mm ID and 63 mm external dia. Available in 125 kHz or 13.56 MHz, tag allows for tracking cylinders throughout their lives, from filling plant through delivery cycle back to owner.

This story is related to the following:
Labels, Tags, Signage and Equipment
Automatic ID Sponsored by: Mag-Jestic -

Search for suppliers of: Metal Tags | Radio Frequency Identification (RFID) Systems | Identification Tags | RF Tags

Handheld LF RFID Reader is designed for pet tracking.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 18 Jun 2009 08:30:09 -0400

Offering one button operation, portable 134.2 kHz FDX RFID reader GAO222005 can read electronic data on any pet and is designed to track and manage animals. It has auto-power-off function, memory capacity of 256 Kbit, and read range from 0-4 cm. Powered by 9 V alkali battery or adaptor, reader features high resolution LCD screen to display data.

This story is related to the following:
Automatic ID Sponsored by: Mag-Jestic -

Search for suppliers of: Radio Frequency Identification (RFID) Systems | RF Readers

RFID System provides document inventory management.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 17 Jun 2009 08:29:59 -0400

Integrating RFID smart labels and DL8033 handheld RFID reader, RFID Document Management System provides automated identification of circulating files. With HF RFID label adhesive on each document, information such as location can be tracked in real time. RFID labels provide more than 10 year lifespan, can be rewritten more than 100,000 times, and support ISO 15693 protocol. Using anti-collision algorithm, reader can locate misplaced documents and manage documents in piles.

This story is related to the following:
Automatic ID Sponsored by: Mag-Jestic -

Search for suppliers of: Antocollision Multi-Tag Reading RFID Systems | Radio Frequency Identification (RFID) Labels | Radio Frequency Identification (RFID) Systems | RF Readers

Laser Barcode Scanner suits wide range of industries.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 15 Jun 2009 08:31:30 -0400

Combining both Quick Connect and X-Mode technologies, QX-870 delivers network connectivity with most decode algorithms available, including symbol reconstruction. Unit's intelligent sweeping laser can read multiple 1D and stacked 2D barcodes in varying locations, even when small, poorly printed, or damaged. Capable of reading codes at varying heights, distances, and angles, unit has 4 M12 connectors for direct connection of power, trigger, I/O, and multiple ports.

This story is related to the following:
Automatic ID Sponsored by: Mag-Jestic -
Computer Hardware and Peripherals

Search for suppliers of: Barcode Scanners | Laser Scanners

Passive UHF RFID Tags offer read range up to 15 ft.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 10 Jun 2009 08:28:02 -0400

Operating in 902 or 860 MHz frequencies, UHF RFID Tags are suited for in-building RFID document tracking and asset management applications in office and manufacturing environments. They support ISO 18000-6B or ISO/IEC 18000-6C / EPC Class 1 Gen 2 protocols. Each chip comes with unique ID number and memory capacity available in 1K/2K/4K, which offers details of specific product.

This story is related to the following:
Labels, Tags, Signage and Equipment
Automatic ID Sponsored by: Mag-Jestic -

Search for suppliers of: Asset Tags | RF Tags | Radio Frequency Identification (RFID) Systems

Fixed Reader Antenna Panel suits agriculture applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 09 Jun 2009 08:24:57 -0400

When used in conjunction with 134.2 kHz DSP long-range fixed RFID readers(GAO212007), 134.2 kHz ASA fixed reader antenna panel (GAO312002) provides system to read HDX and FDX RFID transponders with excellent reading distance even under harsh conditions. Operation is efficient and stable due to construction and resistance against typical environmental influences. Applications include those requiring long distance identification and large read volumes.

This story is related to the following:
Automatic ID Sponsored by: Mag-Jestic -
Communication Systems and Equipment

Search for suppliers of: Radio Frequency Identification (RFID) Systems | RFID Antennas

RFID Card Reader features USB connection.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Jun 2009 08:33:40 -0400

Operating in 125 kHz or 13.56 MHz frequency, compact RFID Card Reader connects directly to USB interface, both for power and to output tag data to PC and PDA. It is compatible with multi RFID chips, such as EM4001, Hitag-Family, I-CODE, Mifare-Family, and has 2-LED signal lamp indication for standby search and data communications. Enabling close quarter checking with read range from up to 100 mm, reader is suited for applications such as industrial tracking, and access control.

This story is related to the following:
Automatic ID Sponsored by: Mag-Jestic -

Search for suppliers of: Radio Frequency Identification (RFID) Systems | RF Readers

Autofocus Imager reads 2D direct part marks.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Jun 2009 08:28:51 -0400

Available in high-speed and high-resolution configurations, MINI Hawk Imager can consistently read symbols that are damaged, distorted, or otherwise challenging. EZ button enables unit to automatically adjust focal distance and set internal parameters for optimized symbol reading. Packaged in miniaturized MINI hardware platform, imager fits in tight spaces and can solve any barcode or 2D track, trace, and control application.

This story is related to the following:
Automatic ID Sponsored by: Mag-Jestic -
Vision Systems

Search for suppliers of: Barcode Readers | Imaging Systems

MICR Reader automates remote deposit capture of checks.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Jun 2009 08:31:20 -0400

ClearCheck21 MICR Reader provides high-reliability OCR of check MICR line, as well as correction strips, and can read MICR lines from IRDs. It can read multiple lines per document, in any orientation, and accepts check images from flat bed, hot dog, as well as traditional check scanners. Able to read x9.37 image cash letter files, unit accepts PDF, TIFF, JPG, and other formats. Device can also extract well-cropped, deskewed check image from larger image.

This story is related to the following:
Automatic ID Sponsored by: Mag-Jestic -

Search for suppliers of: Magnetic Ink Character Recognition (MICR) Readers | Check Readers

Plug-and-Play Peripheral enables contactless payments.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Jun 2009 08:31:07 -0400

With Model QX1000, users can add contactless card payment acceptance to existing point-of-sale devices, electronic cash registers, and PCs. Device utilizes single contactless interface and is suited to wide range of EMV and mag-stripe contactless cards including Visa, MasterCard, Discover, and American Express, as well as non-payment applications such as MiFare. Multiple LEDs and buzzer communicate transaction status to both consumer and merchant.

This story is related to the following:
Retail and Sales Equipment
Automatic ID Sponsored by: Mag-Jestic -

Search for suppliers of: Point of Sale (POS) Equipment | Magnetic Stripe Readers

Miniature microSD(TM) Card Connectors are RoHS compliant.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 01 Jun 2009 08:22:47 -0400

Featuring insulation resistance of 1,000 M<font face='Symbol'>W</font> at 500 Vdc, with contact resistance of 100 m<font face='Symbol'>W</font> at 1 mA, DM3 Series of card connectors are available in 3 different configurations for compatibility. DM3AT/DM3BT Push-Push connectors feature card ejection travel of 4 mm for easy hold and removal of card, while DM3C hinge connectors have metal cover that guides card during insertion and removal. DM3D push-pull card connectors come with partial card insertion hold, preventing card from fall-out.

This story is related to the following:
Automatic ID Sponsored by: Mag-Jestic -
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Smart Card Connectors | Miniature Connectors | Push-Pull Connectors

RFID Reader can be used as embedded module by OEMs.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 29 May 2009 08:15:27 -0400

Operating in 13.56 MHz frequency band, GAO 713005 multi-protocol F RFID reader mini module provides low power and high performance platform designed to enable any OEM device with RFID reader technology. Module comes with firmware designed to ensure ease of integration.

This story is related to the following:
Automatic ID Sponsored by: Mag-Jestic -

Search for suppliers of: Radio Frequency Identification (RFID) Systems | RF Readers

RFID Reader/Writer works with compact flash enabled PDA.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 29 May 2009 08:15:26 -0400

Designed to read and write Mifare MZF1 tags, GAO223001 operates at 13.56 MHz and is powered by CF type 1 connector from PDA. RFID reader/writer has built-in antennae, provides baud rate of 19,200 Bps, and supports maximum read distance of 3 cm. Suited for close proximity applications such as logistics, guard patrol tour, time and attendance, ticketing and access control, unit can be used as mobile checker when used with CF-enabled PDA.

This story is related to the following:
Automatic ID Sponsored by: Mag-Jestic -

Search for suppliers of: Radio Frequency Identification (RFID) Systems | RF Readers

Unmanned, Heavy-Duty Parking Barrier Gate is RFID-enabled.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 28 May 2009 08:33:13 -0400

Used in conjunction with GAO RFID readers, tags, and antennas, GAO410004 safely controls vehicle access in medium- to high-traffic applications as well as those with wide lane (10-20 ft) management requirements. It withstands harsh environments and opens fully in 1-4 sec, depending on length of arm. Built-in frequency converter ensures progressive accelerations and controlled decelerations for vibration-free movement and protection of mechanism.

This story is related to the following:
Architectural and Civil Engineering Products
Automatic ID Sponsored by: Mag-Jestic -

Search for suppliers of: Barrier Gates | Self-Opening Automatic Gates | Vehicle Identification Systems

Portable RFID Reader/Writer has pistol grip design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 27 May 2009 08:37:46 -0400

Designed to read RFID tag data in 13.56 MHz access range, high frequency mobile RFID reader/writer GAO223005 transfers real-time data to host computer simultaneously. It is compatible with both ISO15693 and ISO14443A/B protocols. Suited for warehouse distribution, point-of-sales (POS) inventory control, or field services, rugged unit can achieve high reading rate with optional interfaces such as WLAN Tri-mode 802.11 a/b/g and Bluetooth.

This story is related to the following:
Automatic ID Sponsored by: Mag-Jestic -

Search for suppliers of: Radio Frequency Identification (RFID) Systems | RF Readers

Software transfers business card info to smartphone.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 May 2009 08:27:08 -0400

Designed for Nokia® smartphones running on Symbian® S60, Business Card Reader 2.0 transfers contact information from business cards directly to mobile phone's address book by using smartphone camera and text recognition technology. To add new contacts, user starts program on device and takes picture of business card. Program reads picture, automatically extracts contact data, and enters information into appropriate fields of mobile address book.

This story is related to the following:
Software
Automatic ID Sponsored by: Mag-Jestic -

Search for suppliers of: Telephony Software | Optical Character Recognition (OCR) & Optical Character Verification (OCV) Software | Data Capture Software