ThomasNet Industrial Newsroom -

Prototyping Material simulates parts made out of rubber.

info@productnews.com (ThomasNet News) — Thu, 08 Oct 2009 08:29:06 -0500

With TangoBlackPlus, designers and manufacturers can create parts that closely resemble broad range of rubber products. Material offers flexibility, optimal elongation and break, and resistance to tear. Black in color, product is suited for creating models of products in automotive market, defense industry, and shoe industry. It will also help development of soft-touch grips, handles, gaskets, and seals.

This story is related to the following:
Materials and Material Processing
Test and Measuring Instruments

Search for suppliers of: Composite Materials | Rapid Prototyping Materials | Rapid Prototyping Equipment & Systems

Composite Cement is lightweight and flexible.

info@productnews.com (ThomasNet News) — Mon, 05 Oct 2009 08:27:04 -0500

Xtreme Lightweight Series is blend of cement with lightweight aggregates and reinforcing fibers. Fireproof, termite-proof, and mold-resistant, it can be cut, trimmed, nailed, molded, and formed into any shape. Product also allows any finish or any texture of wood or stone to be simulated; it attaches to gypsum, wall board, and concrete block, wood, and metal and can be stained, painted, or colorized throughout mix.

This story is related to the following:
Architectural and Civil Engineering Products
Materials and Material Processing
Chemical Processing and Waste Management

Search for suppliers of: Lightweight Concrete | Composite Materials | Fire Resistant Cement | Cement

Concrete Floor Patch Kit cures in as little as 1 hr.

info@productnews.com (ThomasNet News) — Thu, 01 Oct 2009 08:42:32 -0500

HyperPatch(TM) lets end-users apply heavy-duty repair patch, indoors or outdoors, that will be ready to walk on within 1 hr. It comes in 2 gal container, which includes urethane liquids, trowel-grade sand, and complete instructions. Once mixed, material can be hand-troweled at recommended ¼ in. thickness. Areas of use include hallways, food service areas, laboratories, showers areas, food processing, hospitals, manufacturing plants, sidewalks, and dock areas.

This story is related to the following:
Construction Equipment and Supplies
Materials and Material Processing

Search for suppliers of: Concrete Patchers | Concrete Repair Materials

Gel Paste offers thermal conductivity up to 6.5 W/moK.

info@productnews.com (ThomasNet News) — Fri, 19 Jun 2009 08:27:53 -0500

Supplied in syringe to facilitate application, V30Z63MDP Series features specific volume resistance ratio up to 7.2 x 1014 Wocm, dissipation factor down to 0.0004 at 1 MHz, and breakdown voltage up to 9.6 kV/mm. RoHS-controlled substance is used to fill gaps around heat sources such as semiconductors. Other applications involve surface, underside, and lead heat sources such as ICs, as well as computer internal components, power supplies, and power transistors.

This story is related to the following:
Paints and Coatings
Materials and Material Processing

Search for suppliers of: Thermally Conductive Coatings | Electrically & Thermally Conductive Materials | Thermal Compounds

Composites perform well in petrochemical applications.

info@productnews.com (ThomasNet News) — Wed, 20 May 2009 09:28:47 -0500

Consisting of multiple plies of woven fiberglass saturated with polyimide resin, P95 offers high mechanical strength and low coefficient of thermal expansion. Material maintains physical properties at temperatures up to 240°C, and other properties, such as compressive strength of 70,000 psi, low moisture absorption, and chemical resistance, allow use in variety of harsh environments. It is finished in 36 x 48 in. sheets with thicknesses ranging from 0.007-4.00 in.

This story is related to the following:
Chemical Processing and Waste Management
Materials and Material Processing

Search for suppliers of: Composite Resins | Composite Materials | High Temperature Composites

Concrete Floor Patch Kit includes color aggregates.

info@productnews.com (ThomasNet News) — Tue, 30 Dec 2008 09:01:57 -0500

QuartzPatch(TM) enables end-users to apply epoxy-resurfacer with addition of colored aggregates in hallways, food service areas, laboratories, showers areas, food processing areas, hospitals, bakeries, and dock areas. Packaged in 5 gal container, multi-colored quartz concrete-floor patch kit includes epoxy liquids, colored aggregates, and complete instructions. End-user can select from stock blends or design custom color sequence. Once mixed, material can be hand- or power-troweled.

This story is related to the following:
Construction Equipment and Supplies
Materials and Material Processing
Architectural and Civil Engineering Products

Search for suppliers of: Concrete Patchers | Concrete Repair Epoxies | Concrete Repair Materials | Floor Patching & Resurfacing Materials | Concrete Floor Surface Treatment Systems

Concrete Patching Product cures in all temperatures.

info@productnews.com (ThomasNet News) — Tue, 09 Sep 2008 07:38:48 -0500

With up to 30% tensile elongation and ability to cure in -20 to +130°F temperatures, Pro-Poxy AWP high-strength epoxy-urethane hybrid is suited for extremely cold conditions, such as freezers, and those that endure extreme heating and thawing, such as parking structures, airport taxiways, and runways. Available in ready-to-use kit, product has no halo effect on surrounding concrete. Repaired areas can be open to traffic in as little as 15 minutes.

This story is related to the following:
Construction Equipment and Supplies
Materials and Material Processing

Search for suppliers of: Road & Driveway Patching Materials | Concrete Patchers | Concrete Repair Materials

Coated Infill is safe, clean, and non-toxic.

info@productnews.com (ThomasNet News) — Wed, 27 Aug 2008 07:33:41 -0500

Combining naturally occurring infill granules with ceramic coating, PermaCoat Naturally Tough Infill offers eco-friendly alternative for artificial turf infilling. Product is lead and heavy metals free, and manufactured without noxious solvents or chemicals. After curing, ceramic coating encapsulates granules making infill virtually dust-free and water resistant. Available in 2 standard UV stabilized colors, PermaCoat withstands extreme temperatures and is fire resistant.

This story is related to the following:
Green & Clean
Materials and Material Processing
Architectural and Civil Engineering Products

Search for suppliers of: Silica Sand | Granules | Grass & Turf Pervious Pavers

Ceramic Structured Media optimizes RTO thermal efficiency.

info@productnews.com (ThomasNet News) — Thu, 19 Jun 2008 07:44:54 -0500

Flexilith(TM) HA is designed for pollution control in printing, painting, and spray coating industries as well as all wastewater applications with regenerative thermal oxidizers (RTOs) and biosolids drying facilities. Shape and material composition optimizes heat absorption and release as well as thermal shock resistance. Lack of horizontal surfaces minimizes media's ability to trap particulates from incoming air and decreases pressure drop across bed.

This story is related to the following:
Green & Clean
Materials and Material Processing

Search for suppliers of: Ceramic Materials

Aluminum Substrate offers thermal management for power LEDs.

info@productnews.com (ThomasNet News) — Fri, 16 May 2008 07:35:12 -0500

Consisting of thermally conductive aluminum alloy substrate with thermally conductive glass dielectric material, Anotherm® Plus withstands high voltages, and enables increased light output for LEDs. Anodized aluminum material provides thermal transfer for LED assemblies that are mounted directly onto substrates. Applications include vending machines, outdoor signage and display, aquarium lighting, emergency vehicle lighting, as well as architectural and general lighting.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Metal Insulated Substrates | Dielectric Materials

Thermally Conductive Polymers provide no antenna effect.

info@productnews.com (ThomasNet News) — Mon, 21 Apr 2008 07:37:58 -0500

Suited for heat sinks and thermal management solutions, CoolPoly® thermally conductive injection molding grade thermoplastics offer no amplification of electromagnetic or radio frequency interference and no magnetic coupling. E-series is electrically conductive and provides inherent EMI/RFI absorption, while D-series is electrically insulative and produces no signal interference. Features include thermal conductivity of 20 w/mk, thermal diffusivity of 0.1 cm²/sec, and density of 1.7 g/cc.

This story is related to the following:
Materials and Material Processing
Services

Search for suppliers of: Electrically & Thermally Conductive Materials | Conductive Polymers

Conductive Pastes are designed for firing at 380°C.

info@productnews.com (ThomasNet News) — Mon, 15 Oct 2007 08:09:51 -0500

ElectroSperse(TM) X-120, X-122, and X-126 silver-based conductor pastes maintain conductivity even at low end of firing profile, achieving sheet resistivity of 2-3 mW/sq. They adhere to ITO (Indium Tin Oxide) or F-doped TO (Fluorine-doped Tin Oxide)-coated glass when fired at 380-500°C. Model X-126 rheology suits syringe dispensing via extrusion, while Models X-120 and X-122 are intended for screen printing applications.

This story is related to the following:
Materials and Material Processing
Printing and Duplicating Equipment

Search for suppliers of: Electronic Conductive Materials | Silk Screen Paste

Composite Surface features static dissipative properties.

info@productnews.com (ThomasNet News) — Wed, 03 Oct 2007 07:55:29 -0500

Consistently maintaining surface resistivity of 106 to 109 W/square, StatNot(TM) XC stabilizes static electricity and conductivity. It combines with certain base materials to achieve critical material properties for specific application requirements, such as mechanical strength, moisture resistance, and creep resistance. Composite surface is suited for applications in electronic assembly, such as test fixtures and assembly work surfaces.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Composite Materials | Static Dissipating Plastic Materials

Ceramic Substrate suits thick-film applications.

info@productnews.com (ThomasNet News) — Wed, 25 Jul 2007 07:49:13 -0500

Designed to address miniaturization and higher-power applications, DuraStrate consists of fine-grained (1.5-2.0 micron) microstructure material optimized for biaxial flexural strength, consistent thicknesses, camber flatness, and aged adhesion. Ceramic substrate material is designed for optimal performance in very thin (10-15 mil) varieties of thick-film substrates.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Printed Thick Film Substrates | Ceramic Materials

Compound protects system components and pipes.

info@productnews.com (ThomasNet News) — Fri, 08 Jun 2007 07:44:49 -0500

Made of hard aggregate material, cement binder, and micro and nano silica, KALCRET features mixing time of 5 min and can be applied overhead. Hard aggregate provides wear protection, while micro and nano silica fill pores between cement portions. Suitable for temperatures up to 2,192°F, KALCRET reaches high strength and wear resistance after 8 hr. It is available in troweled, cast, or sprayed-on versions for lining components with horizontal, vertical, inclined, curved, and flat surfaces.

This story is related to the following:
Materials and Material Processing
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Paints and Coatings

Search for suppliers of: Permanent Protective Coatings | Pipe Linings | Silica | Aggregates

Composite Materials enable clean and green 3D printing.

info@productnews.com (ThomasNet News) — Fri, 25 May 2007 08:20:11 -0500

Designed for finishing monochrome 3D printed models, Model zp®140 water curing material and Model zp®131 composite material deliver bright whites and harden quickly, enabling users to print tough, bright, and detailed 3D parts. They are suitable for users who require strong parts for applications such as fit and functional testing. Both are available for ZPrinter® 310 series and Spectrum Z(TM)510.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Composite Materials

Dielectric Gels suit electronic packaging applications.

info@productnews.com (ThomasNet News) — Tue, 27 Feb 2007 07:50:13 -0500

Low-outgassing EPM-2480, EPM-2481, and EPM-2482 are designed for encapsulation of chip packages in devices where outgassing-related contamination would be problematic. Able to cure into soft, compliant silicone, products help reduce stress on electronic assemblies during temperature cycling while protecting against environmental factors and shock. Types EPM-2480 and EPM-2481 are based on dimethyl silicone systems, while EPM-2482 is based on diphenyl dimethyl silicone system.

This story is related to the following:
Chemical Processing and Waste Management
Materials and Material Processing

Search for suppliers of: Silicone | Dielectric Materials

Composite Production Board suits masonry applications.

info@productnews.com (ThomasNet News) — Thu, 18 Jan 2007 07:05:13 -0500

Composite of Chemthane 7030 two-component, 100% solids spray polyurethane and rigid wood or wood laminate core is used in production of concrete and masonry form and support products. Polymer resin, which is 100% solids and zero-VOC formulated, is sprayed directly to prepared wooden substrate to form seamless, plastic barrier against abrasion, impact, and tearing. Even if punctured or torn, wear-resistant coating does not lend to being peeled or torn off wood substrate.

This story is related to the following:
Chemical Processing and Waste Management
Materials and Material Processing

Search for suppliers of: Composite Resins | Composite Materials | Coated & Surfaced Boards

SiC Ceramic helps extend semiconductor equipment life.

info@productnews.com (ThomasNet News) — Fri, 10 Nov 2006 07:46:30 -0500

Targeted for semiconductor processing equipment manufacturing, Performance Silicon Carbide (SiC) is manufactured utilizing chemical vapor deposition (CVD) process. Available in ultrapure and low electrical resistivity grades, material properties include high purity, stiffness, thermal shock resistance, and thermal conductivity. Low electrical resistivity Performance SiC, when used in heating elements and susceptors, provides heating uniformity inside processing chamber.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Ceramic Materials | High Temperature Ceramics | Wear Resistant Ceramics

Prepreg suits multilayer PCB construction.

info@productnews.com (ThomasNet News) — Wed, 09 Aug 2006 08:09:31 -0500

Offering high fill/flow version of RO4450B circuit material, RO4450B-dx Bondply is designed to fill high-density designs while still offering thin dielectric spacing. Product consists of glass-reinforced, hydrocarbon/ceramic thermoset suited for multilayer printed circuit boards. Material can be fabricated using standard epoxy/glass FR4 processes.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Prepregs | Plastic Composites | Composite Materials