ThomasNet Industrial Newsroom -

Diode Array protects high-speed data interfaces from ESD.

info@productnews.com (ThomasNet News) — Mon, 02 Nov 2009 08:40:59 -0500

Supplied in lead-free, 2 x 2.2 mm, 5-pin SC70 package, MAX14541E protects 3-channel data interfaces from ESD spikes up to ±15 kV (Human Body Model). Input capacitance, rated at 6 pF typ, prevents signal distortion in high-speed applications. Meanwhile, leakage current of less than 1 nA results in minimal impact for end application. Array is specified over -40 to +125°C range and suits glucose meters, cell phones, media players, PDAs, and other portable applications.

This story is related to the following:
Electronic Components and Devices
Materials and Material Processing

Search for suppliers of: Diode Arrays | ESD Products

ESD Protectors suit mobile/portable electronics applications.

info@productnews.com (ThomasNet News) — Fri, 25 Sep 2009 08:36:12 -0500

Bidirectional SESD0201C-006-058 is 0.6 pF device with insertion loss under 0.5 dB up to 3 GHz and is suited for protecting high-speed data lines or low-voltage antenna ports. Featuring capacitance of 12 pF, SESD0201C-120-058 can be used for keypads/power buttons/speakers/microphone ports in portable systems. Both 0201-sized units offer 8 kV contact and 15 kV air discharge protection, while 0402-sized SESD0402S-005-054 for USB and HDMI, has 0.5 pF capacitance and 10 kV discharge.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: ESD Products

ESD ICs protect sensitive electronics of portable devices.

info@productnews.com (ThomasNet News) — Tue, 01 Sep 2009 08:31:34 -0500

Comprised of 1-, 2-, 4-, and 6-line array designs, LXES Series protects electronic equipment, such as mobile phones and portable PCs, from electrostatic discharge (ESD). Silicon-based products feature design optimized for minimal capacitance and signal loss on high-speed data and transmission lines. Suppression levels are less than 100 V output when input voltage is 15 kV, and repetition durability is 1,000 cycles at 8 kV contact voltage.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: ESD Control Equipment | Electrostatic Filters

ESD Protection Array targets digital consumer devices.

info@productnews.com (ThomasNet News) — Mon, 31 Aug 2009 08:35:45 -0500

Housed in 4 x 1.7 mm, 16-lead TDFN package with 0.5 mm pitch, XtremeESD CM1238 provides 8 channels of ESD protection that meet ±15 kV contact discharge and ±20 kV air discharger per IEC61000-4-2 standard. Unit incorporates PicoGuard XS® architecture, which integrates inductors with diodes to create fixed point impedance matching for high speed data lines. Device is suited for digital TVs, LCD displays, notebook computers, set top boxes, and HD DVD recorders.

This story is related to the following:
Materials and Material Processing
Electronic Components and Devices

Search for suppliers of: ESD Products | ESD Control Equipment | Integrated Circuits (IC)

Compact ESD Array protects high-speed serial interfaces.

info@productnews.com (ThomasNet News) — Thu, 27 Aug 2009 08:40:00 -0500

Supplied in 0.8 x 0.8 x 0.4 mm CSP, PicoGuard CM6100 provides 2 channels of 15 kV air discharge ESD protection with sub 1.5 pF capacitance for USB 2.0 Hi-Speed interfaces as well as LVDS and emerging serial interfaces such as MIPI used in handsets and mobile devices. Dynamic resistance (0.7 ohm) and clamping voltage (9.8 V typ) define how quickly internal diode reacts to ESD strike and how much residual current passes through the protection device.

This story is related to the following:
Materials and Material Processing
Electronic Components and Devices

Search for suppliers of: ESD Products | ESD Control Equipment | Integrated Circuits (IC)

EMI/ESD Filter Arrays feature less than 1 dB input loss.

info@productnews.com (ThomasNet News) — Tue, 25 Aug 2009 08:27:32 -0500

Featuring 0.6 mm profile, 4-channel VEMI45LA-HNH and 8-channel VEMI85LA-HGK are housed in LLP1713 and LLP3313 packages, respectively. Units provide EMI filtration and ESD protection for embedded cameras and LCDs in PDAs, mobile phones, or any system that receives RF signals in 800-2,400 MHz frequency range. Lead-free and RoHS-compliant, filters feature typical cut-off frequencies of 150 MHz, low line resistance of 12 W, and line inductance of 10 nH.

This story is related to the following:
Communication Systems and Equipment
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Materials and Material Processing
Green & Clean

Search for suppliers of: EMI/RFI Filters | Electrostatic Filters

Cordless Electrostatic Gun is ergonomically designed.

info@productnews.com (ThomasNet News) — Thu, 23 Jul 2009 08:36:07 -0500

Compact and lightweight Vector Solo 65 kV Gun features ergonomic handle contouring that provides operators proper grips, allowing for extended spray times with less fatigue. Requiring less force for trigger pulls and minimizing handle vibrations, gun delivers uniform applications.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Electrostatic Spray Guns

Automatic Gun delivers advanced electrostatics.

info@productnews.com (ThomasNet News) — Wed, 22 Jul 2009 08:30:28 -0500

Weighing 3.35 lb, Evolver SE is suited for fixed gun, reciprocator, or robotic applications. Gun features advanced air caps that achieve fine particle atomization, delivering uniform spray patterns, consistent paint build-up, and quality finishes. Major components are made of high-strength, engineered resins for minimized maintenance and downtime.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Electrostatic Sprayers | Electrostatic Spray Guns | Electrostatic Finishing Equipment

Spray Gun is offered in cordless portable model.

info@productnews.com (ThomasNet News) — Wed, 08 Jul 2009 08:33:44 -0500

Providing accurate spray patterns and uniform finishes, Vector Solo AA utilizes air-assisted airless technology and atomization. It features ergonomic handle contouring that provides operators proper grip and reduces fatigue. Gun requires less force for trigger pulls, minimizing handle vibrations.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Electrostatic Spray Guns

Static Monitoring System is used on Type C FIBCs.

info@productnews.com (ThomasNet News) — Mon, 06 Jul 2009 08:34:01 -0500

Approved to FM and ATEX standards, Earth-Rite® FIBC grounding systems constantly monitor Type C Flexible Intermediate Bulk Containers (FIBCs) and similar semi-conductive containers to ensure their anti-static features are within correct specifications and achieving constant positive ground connection. Fail-save interlock design allows product transfer only when resistance through container is less than 1x108 W. Unacceptable readings render system inoperable.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Safety and Security Equipment
Materials and Material Processing

Search for suppliers of: Static Grounding Clamps | Static Grounding Control Systems

ESD Protection Diodes are suited for portable devices.

info@productnews.com (ThomasNet News) — Thu, 02 Jul 2009 08:38:51 -0500

Model ESD11N5.0ST5G is 0.6 pF unit that has clamping performance and minimal capacitance needed for USB 2.0 and HDMI applications. It also maintains less than 0.5 dB insertion loss up to 3 GHz. Model ESD11B5.0ST5G is 15 pF product that suits general purpose and low-speed data lines. Housed in 0.6 x 0.3 x 0.3 mm, 0201 DSN-2 package, both provide clamp input ESD waveform of 8 kV, per IEC61000-4-2 contact standard, to 10 V in nanoseconds.

This story is related to the following:
Electronic Components and Devices
Materials and Material Processing

Search for suppliers of: Integrated Circuits (IC) | Surface Mount Diodes | ESD Products

Conductive Tapes meet shielding and adhesive needs.

info@productnews.com (ThomasNet News) — Tue, 16 Jun 2009 08:29:07 -0500

Offered in foil, film, laminates, and high-temperature versions, conductive tapes can be applied to EMI/RFI shielding and printed circuit board applications. PCB tapes are available in kapton, silicone, and acrylic adhesives for finger planting and wave solder uses. Designed for low- and high-temperature work, electric and electrical insulation tapes are available in range of gauges with various adhesive types and are die cut for accelerated application.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Mounting and Attaching Products
Materials and Material Processing

Search for suppliers of: Silicone Tapes | Kapton Tapes | High Temperature Tapes | Foil Tapes | Film Tapes | EMI/RFI Shielding Tapes | Electrical Tapes | Conductive Tapes | Circuit Board Tapes | Tapes

Common Mode Choke EMI Filter integrates ESD protection.

info@productnews.com (ThomasNet News) — Tue, 09 Jun 2009 08:25:08 -0500

Suited for high-speed data lines, NUC2401MN combines common mode EMI filtering with ESD protection to ±12 kV. Unit operates in temperatures from -40 to +85ºC, and provides Machine Model and Human Body Model ESD ratings of 1.6 kV and 16 kV, respectively. Maxi peak pulse current rating is 19 A, and max clamp voltage is 10 V at peak current of 5 A. Cutoff frequency for common mode noise reduction is 40 MHz and common mode impedance at 100 MHz and 500 MHz is 200 W and 500 W, respectively.

This story is related to the following:
Communication Systems and Equipment
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Materials and Material Processing

Search for suppliers of: EMI/RFI Filters | Electrostatic Filters

Mounting Tape provides 1.4 W/mK of thermal conductivity.

info@productnews.com (ThomasNet News) — Mon, 01 Jun 2009 08:22:48 -0500

Featuring thermal impedance of just 208°C-mm2/W, double-sided adhesive tape Keratherm® KL 90 consists of ceramic-filled acrylic adhesive film that provides bonding properties, and replaces use of mechanical fasteners. Silicone-free tape is 0.300 mm thick and is supplied on 400 mm wide rolls, while custom die-cut shapes are also available. Fiberglass-reinforced version KL 91 is available for applications requiring high peel strength, and conformability to irregular surfaces.

This story is related to the following:
Materials and Material Processing
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Conductive Tapes | Double-Faced Tapes | Mounting Tapes | Adhesive Tapes

Dual-Channel ESD IC is housed in ultra-thin package.

info@productnews.com (ThomasNet News) — Tue, 26 May 2009 08:27:09 -0500

Supplied in PicoStar(TM) package with 0.15 mm profile, TPD2E007 can be surface-mounted to or embedded in PCBs of portable consumer electronics to deliver compact ESD protection. This back-to-back diode array allows AC-coupled data transmission without compromising signal integrity. Characteristics include ±8 kV IEC 61000-4-2 contact discharge, ±15 kV IEC 61000-4-2 air-gap discharge, 15 pF line to ground capacitance, and 50 nA leakage current.

This story is related to the following:
Electronic Components and Devices
Materials and Material Processing

Search for suppliers of: Integrated Circuits (IC) | ESD Control Equipment

Static Neutralizer System suits hazardous locations.

info@productnews.com (ThomasNet News) — Fri, 15 May 2009 08:26:45 -0500

Suited for hazardous location printing and coating operations, ION POWER(TM) HL-Type Static Neutralizer controls static charges over range of 8 in. and at web speeds over 2,000 fpm. System facilitates networking of multiple neutralizing stations, protecting equipment, product, and operators. Series 8155 POWER MODULES connect with 8300 COMMUNICATOR modules through 2-wire RS-485 bus to transfer real-time data on neutralizer status, system diagnostics, and static control performance.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Static Neutralizers

PSA Foil Tape suits photovoltaic module applications.

info@productnews.com (ThomasNet News) — Thu, 16 Apr 2009 08:38:16 -0500

With 1 oz tin-plated copper foil backing, 2.4 mil pressure-sensitive adhesive (PSA) foil tape ARclad® 90038 offers high electrical conductivity and corrosion resistance, and provides alternative to bus bar material used in thin-film PV modules. It features homogenous conductive adhesive technology that forms stable, conductive bonds to electrical contact points even under extreme environmental stress. UL 510 rated tape is supplied in roll or spooled format.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Materials and Material Processing

Search for suppliers of: Corrosion Resistant Tapes | Adhesive Tapes | Conductive Tapes | Foil Tapes | Pressure Sensitive Tapes

Benchtop Static Eraser enables DIY maintenance.

info@productnews.com (ThomasNet News) — Thu, 16 Apr 2009 08:38:14 -0500

Once front guard of VESSEL F12E Stat/Clean is removed, operator can access and remove electric discharge plate to clean or replace electrode needle when needed. Unit is equipped with piezo transformer that gives consistent ion balance with ozone generation of 0.05 ppm or less. With round electrical discharge unit, F12E provides accurate ion balance of ±5 V or less. Additional features include adjustable fan speed and 24 V low-voltage wiring to avoid current leaks.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Static Eliminators | Bench Top Ionizers

ESD Device protects antennas in mobile handsets.

info@productnews.com (ThomasNet News) — Tue, 24 Mar 2009 08:32:19 -0500

Intended for FM radio, GPS, Bluetooth, and WLAN antennas, single-channel PicoGuard CM1282 features low capacitance of 0.5 pF and low insertion loss of less than -0.25 dB through 1.8 GHz. Device delivers 8 kV contact discharge protection per IEC 61000-4-2 Level 4. Available in SOD-882 lead-free package, RoHS-compliant unit meets linearity mask for 802.11 protocols.

This story is related to the following:
Materials and Material Processing
Electronic Components and Devices

Search for suppliers of: ESD Products | Telecommunications Integrated Circuits | Integrated Circuits (IC)

Drying Cabinet uses synthetic zeolite as desiccant.

info@productnews.com (ThomasNet News) — Fri, 20 Mar 2009 08:34:18 -0500

Due to regenerative properties of zeolite, configurable XD Series delivers consistent relative humidity below 0.5% without requiring any maintenance. Temperature and humidity levels are displayed on operator panel on front of cabinet, and positive action tactile buttons allow operators to set appropriate alarm point for monitoring RH from distance. Each cabinet comes complete with stainless steel shelves, conductive glass doors, and all surfaces coated with ESD safe paint.

This story is related to the following:
Materials and Material Processing
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!

Search for suppliers of: ESD Cabinets | Drying Cabinets