ThomasNet Industrial Newsroom -

UVA Spot-Curing System utilizes high-energy LEDs.

info@productnews.com (ThomasNet News) — Mon, 23 Nov 2009 08:30:04 -0500

BlueWave® LED Prime UVA high-intensity spot-curing system delivers maximum curing energy through 5 mm diameter lightguide with output up to 15 W/cm2. Unit includes intensity adjustment feature for users to adjust/control intensity output from 0-100% to assist with process validation and control, while intensity measurement can be accomplished with radiometer. Providing LED life of over 50,000 hr, device is CE-certified and RoHS-compliant.

This story is related to the following:
Materials and Material Processing
Green & Clean

Search for suppliers of: Ultraviolet (UV) Spot Curing Systems

LED Spot Cure System causes no thermal damage.

info@productnews.com (ThomasNet News) — Fri, 11 Sep 2009 08:35:06 -0500

Loctite® UV LED Spot Cure System features monochromatic LED light source that emits 3.0-3.5 W/cm2 of UVA light at 365 nm. Set to continuous on or programmed output modes, system offers instant on/off and requires no warm-up time. Compact and lightweight, it consists of power source/control unit, LED driver module, LED head with 6 mm condenser lens, foot switch, and ac power adapter. With additional LED heads/driver modules, unit can handle up to 4 separate cure areas.

This story is related to the following:
Materials and Material Processing
Optics and Photonics
Vision Systems
Green & Clean

Search for suppliers of: Ultraviolet (UV) Spot Curing Systems | Light Sources

MEMS-Based Machine provides rapid part production.

info@productnews.com (ThomasNet News) — Thu, 14 May 2009 08:30:54 -0500

Suited for rapid manufacturing applications, Araldite® Digitalis is based on MEMS system that cures liquid resin with UV light rather than lasers or reflected light. MLS MicroLightSwitch® units operate via computer-controlled micro-mechanical shutters that distribute UV light pixels onto resin surface, steering light to prevent scattering. Illuminating angle is 90° with micro-lenses used to ensure light uniformity and pinpoint accuracy.

This story is related to the following:
Materials and Material Processing
Machinery and Machining Tools

Search for suppliers of: Ultraviolet (UV) Curing Equipment | Fabrication Machinery

High-Intensity Spot Lamp suits bonding applications.

info@productnews.com (ThomasNet News) — Thu, 26 Feb 2009 08:34:36 -0500

Emitting UVA and blue visible light from 300-450 nm, RoHS-compliant BlueWave® 75 is designed for curing UV and visible light-curable adhesives, coatings, and encapsulants. Adjustment feature provides user control of light intensity to assist in process validation and control. Actuated by foot pedal or PLC, integral shutter makes lamp suited for manual and automated processes. Auto-ranging power supply provides consistent performance at any input voltage.

This story is related to the following:
Materials and Material Processing
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Ultraviolet (UV) Curing Lamps | Ultraviolet (UV) Lamps

Scorch-Retarding Co-agent suits peroxide-cured elastomers.

info@productnews.com (ThomasNet News) — Mon, 29 Sep 2008 07:38:18 -0500

Type SR533R is scorch-retarding version of triallyl isocyanurate (TAIC) that allows formulators to mitigate rapid onset of scorch and cure safety while maintaining cured physical properties. It is effective in peroxide cure of elastomers for applications such as oil and gas exploration, aerospace seals, and automotive and off-road gaskets that encounter sustained high temperatures and pressures.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Specialty Chemicals | Curing Agents

LED Spot-Curing System is CE marked.

info@productnews.com (ThomasNet News) — Thu, 07 Aug 2008 07:46:56 -0500

Suited for spot curing of coatings as well as adhesive bonding of polycarbonate, PVC, PET, metal, glass, and other substrates, BlueWave® LED generates light using array of surface mount LEDs instead of traditional metal halide or mercury bulbs. LEDs produce visible light energy in narrow wavelength band centered at 410 nm. System emits maximum visible-light intensity output of over 2,500 mW/cm² from 8 mm dia lightguide, and allows users to adjust intensity output from 0-100%.

This story is related to the following:
Display and Presentation Equipment
Materials and Material Processing

Search for suppliers of: Ultraviolet (UV) Spot Curing Systems | LED Products

Spot-curing System utilizes array of surface mount LEDs.

info@productnews.com (ThomasNet News) — Mon, 02 Jun 2008 07:43:35 -0500

BlueWave LED generates light using an array of surface mount LEDs that produce visible light energy in narrow wavelength band centered at 410 nm. Emitting maximum visible light intensity output of over 2,500 mW/cm2 from an 8 mm dia lightguide, system allows users to adjust intensity output from 0-100%. BlueWave LED is suited for spot curing of coatings, as well as adhesive bonding of polycarbonate, PVC, PET, metal, glass, and many other substrates.

This story is related to the following:
Display and Presentation Equipment
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Materials and Material Processing

Search for suppliers of: LED Products | Ultraviolet (UV) Spot Curing Systems

Curing Agent promotes spray coating systems control.

info@productnews.com (ThomasNet News) — Mon, 07 Apr 2008 07:39:56 -0500

Polymer chain extender, ETHACURE® 420, helps control cure rates of polyurea and hybrid spray coating systems used in truck bed liners, construction coatings, and other systems used in adhesives, sealants, and elastomeric materials. This aromatic-diamine curing agent extends pot life of formulations and promotes consistent application of thicker spray coatings and soft elastomers. Accelerated flow rates of spray formulations lend to coating adherence and rough-surface penetration.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Extenders | Curing Agents

UV Spot Curing System generates light using SMT LEDs.

info@productnews.com (ThomasNet News) — Tue, 25 Mar 2008 07:38:45 -0500

Suited for spot curing of coatings as well as adhesive bonding of polycarbonate, PVC, PET, metal, glass, and many other substrates, BlueWave(TM) LED high-intensity UV spot curing system does not use metal halide or mercury bulbs, and produces visible light energy in narrow wavelength band centered at 410 nm. System emits maximum visible light intensity output of over 2,500 mW/cm² from 8 mm dia lightguide, and allows users to adjust intensity output from 0-100%.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Ultraviolet (UV) Spot Curing Systems

Epoxy Curing Agents target civil engineering market.

info@productnews.com (ThomasNet News) — Mon, 28 Jan 2008 07:34:00 -0500

Intended for flooring applications, Anquamine® 721 and 731 feature optimal adhesion to concrete, rapid hardness development, and concrete protection properties. Since they are waterborne, curing agents emit zero VOCs and exhibit low odor. Anquamine 721 is suited for thin film applications such as concrete primers and paints, while Anquamine 731 targets high-film build applications such as self-leveling floors, mortars, and grouts.

This story is related to the following:
Materials and Material Processing
Green & Clean

Search for suppliers of: Curing Agents

UV Curing System is designed for operational efficiency.

info@productnews.com (ThomasNet News) — Wed, 31 Oct 2007 07:44:36 -0500

Used for curing inks, adhesives, and coatings, Ultra Light Advanced Ultraviolet Curing System provides 400 W/in. of UV power and is controlled by touch screen panel. It accepts iron additive lamps, along with standard mercury vapor lamps, and utilizes method for uniformly cooling lamp and lamp reflector housing. Safety devices include non-conductive and grounded cables to irradiator as well as built-in main power disconnect and internal temperature sensors.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Ultraviolet (UV) Curing Systems | Ultraviolet (UV) Curing Equipment

LED-Based Curing System offers cool, consistent UV curing.

info@productnews.com (ThomasNet News) — Thu, 04 Oct 2007 07:58:29 -0500

Handheld LED curing system, HH-LED+, uses LEDs to generate UV and visible light from 375-415 nm. Featuring no reduction in intensity for over 5,000 hr, product does not emit IR or other unused wavelengths. It delivers over 350 mW/cm² of curing power and incorporates instant on/off and integral timer features as well as 12 mm lightguide. Solution is suited for spot-curing adhesives in bonding, tacking, and ruggedizing applications.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Materials and Material Processing

Search for suppliers of: Ultraviolet (UV) Curing Equipment

DUV Lamp Subsystem features short wavelength operation.

info@productnews.com (ThomasNet News) — Thu, 12 Jul 2007 07:59:02 -0500

Saturn(TM) DUV (Deep Ultra Violet) Lamp Subsystem offers an operating wavelength range of 170-400 nm to eliminate electrical/heat damage in thin-film and surface processes. System features include compact housing, debris-free electrodeless toroidal bulb design, integrated power supply, internal water cooling, and re-circulating nitrogen cooling to avoid toxic ozone production. Light source is suitable for photoprocessing and cleaning applications.

This story is related to the following:
Cleaning Products and Equipment
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Materials and Material Processing
Optics and Photonics
Vision Systems

Search for suppliers of: Semiconductor Wafer Plating & Cleaning Equipment | Light Sources | Ultraviolet (UV) Lights

UV Curing System is designed for continuous processes.

info@productnews.com (ThomasNet News) — Tue, 19 Jun 2007 07:44:42 -0500

CoolCureXL® InterWeave(TM) System features 2 UV lamps, 3 kW power supply, and one controller that enables both lamps to be pulsed at same rate to optimize conversion of energy into UV light. Delivering 13 J/pulse at 200 pulses/sec to provide cool curing in continuous processes running at rates to 30 fpm, shape of lamps can be custom-engineered to meet OEM process requirements for coverage and speed. System provides instant on/off control, under 300 µsec pulses, and process flexibility.

This story is related to the following:
Materials and Material Processing

LED Spot Curing System offers high intensity output.

info@productnews.com (ThomasNet News) — Mon, 18 Jun 2007 07:55:28 -0500

Comprised of LED light source, LED controller, and interconnecting cables, Loctite® CureJet(TM) 405 LED safely and immediately cures UV- and visible light-cure adhesives. Source provides 1.1 W/cm² output over 0.38 in. dia cure area, and controller can be actuated by external signal or footswitch. Operated in timed or continuous-duty modes, stackable solution offers instant on/off capabilities, internal diagnostics, and digital I/O port with optional PLC interface cable.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Ultraviolet (UV) Curing Equipment

UV Curing Spot Lamp includes intensity adjustment feature.

info@productnews.com (ThomasNet News) — Thu, 08 Mar 2007 07:43:00 -0500

Emitting UVA and blue visible light from 300-450 nm, BlueWave(TM) 200 cures adhesives, coatings, and encapsulants. Intensity Adjustment feature allows manual adjustment during initial UV process validation and production and permits engineers to evaluate full range of intensity produced by lamp from 0-100%. Integral shutter can be actuated by foot pedal or PLC, making lamp suitable for manual and automated processes. Solid-state power supply delivers 90-263 V, 47-63 Hz.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Materials and Material Processing

Search for suppliers of: Ultraviolet (UV) Curing Lamps | Ultraviolet (UV) Lights | Spot Lights

Epoxy Curing Agents withstand difficult environments.

info@productnews.com (ThomasNet News) — Wed, 22 Nov 2006 07:43:45 -0500

Resistant to corrosion and chemicals, Ancamide® 2634(TM) and 2652 provide formulators with barrier coats for marine, maintenance, and chemical facility environments. Ancamide 2652 polyamide adduct is designed for use with liquid epoxy resins in 2-part, ambient-cured coatings. It delivers overcoatability of up to 3 months. Exhibiting heat, blush, and cathodic disbondment resistance, Ancamide 2634 is modified polyamide designed for use in 2-component solvent-borne epoxy coatings.

This story is related to the following:
Chemical Processing and Waste Management
Materials and Material Processing

Search for suppliers of: Polyamide Resins | Curing Agents

Pulsed UV Curing System suits in-line printing.

info@productnews.com (ThomasNet News) — Fri, 17 Nov 2006 07:41:42 -0500

Replacing continuous wave mercury UV, CoolCureXL® RC-801 Curing System features pulsed UV light, which provides instant on/off control and low heat. It consists of lamp housing, controller, and power supply. Producing less than 300 µs pulses, system does not create or use VOCs, and lets OEM or integrator set UV dose from 10-100%. It can be made with custom designed lamps to match in-line printing footprints for paper, film, foil, fabric, labels, packages, CDs, and DVDs.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Printing Ultraviolet (UV) Curing Equipment

UV Curing Spot Lamp suits manual and automated processes.

info@productnews.com (ThomasNet News) — Tue, 29 Aug 2006 07:42:14 -0500

Designed for UV curing of adhesives, coatings, and encapsulants, BlueWave(TM) 50 AS emits over 3,000 mW/cm² of primarily UVA and blue visible light (300-450 nm). Bulbs are rated for 2,000 hr, but can last as long as 4,000 hr. Integral Cool Blue(TM) Filter minimizes shortwave UV and IR transmission, protecting liquid-filled lightguides and producing cooler cures. Other features include solid-state power supply and foot pedal- or PLC-actuated integral shutter and timer.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Materials and Material Processing

Search for suppliers of: Ultraviolet (UV) Curing Lamps | Ultraviolet (UV) Lights | Ultraviolet (UV) Lamps

UV Light Curing Conveyors handle large parts.

info@productnews.com (ThomasNet News) — Tue, 29 Aug 2006 07:42:14 -0500

Available with 18 or 25 in. wide UV curing lamps, WIDECURE(TM) conveyors can be outfitted with longwave or shortwave bulb. Lamp height can be adjusted to accept parts from 5-12 in. high, and tightly controlled line speeds are adjustable in 0.1 fpm increments from 1-50 fpm; faster conveyors are also available. Integral shielding eliminates stray UV light that might otherwise reach operator. Uses include UV sealing, curing, and bonding applications.

This story is related to the following:
Materials and Material Processing
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!

Search for suppliers of: Ultraviolet (UV) Curing Equipment | Ultraviolet (UV) Lamp Conveyor Systems