ThomasNet Industrial Newsroom -

Silicone Compound has Shore A hardness of 45.

info@productnews.com (ThomasNet News) — Fri, 07 Sep 2007 07:44:07 -0500

Suitable for high performance casting, potting, and encapsulation, MasterSil 151 two component compound is designed to cure at room temperature and is resistant to vibration, impact, shock, and thermal cycling. Features include service operating temperature range of -65°F to +400°F, elongation at break of 160%, 460 V/mil dielectric strength, volume resistivity of 1 x 1,015 <font face='Symbol'>W</font> cm, and 10:1 mix ratio by weight. Low viscosity assures complete fill-in around complicated contours.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management
Materials and Material Processing

Search for suppliers of: Casting Compounds | Encapsulation Compounds | Potting Compounds

Ceramic Compound offers high-temperature thermal insulation.

info@productnews.com (ThomasNet News) — Wed, 16 Nov 2005 07:06:59 -0500

Fused silica-based Ceramacast(TM) 645N is suited for encapsulating small ceramic and metal housings used in high temperature devices such as flow meters, pressure sensors, and temperature sensors to 3,000°F. Product offers dielectric strength of 300 V/mil, compressive strength of 7,000 psi, and chemical resistance. Supplied in powder form, compound is mixed with water and sets at room temperature in less than 8 hr. It contains no asbestos or VOCs.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Encapsulation Compounds | Insulating, Impregnating & Sealing Electric Compounds | Casting Compounds | Ceramic Materials

Adhesive/Casting Compound protects electrical feed thrus.

info@productnews.com (ThomasNet News) — Mon, 26 Apr 2004 11:18:59 -0500

Based on cross-linked, inorganic-organic polymer system, Duralco(TM) 4701 consists of single-component adhesive and casting compound that requires no mixing or measuring. It may be used in temperatures to 600°F, adhering to metals, glass, ceramics, and plastics. VOC- and solvent-free material exhibits chemical, solvent and radiation resistance in addition to temperature stability. Product cures to 90 Shore D hardness with 11,100 psi tensile strength.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Materials and Material Processing

Search for suppliers of: Electrically Conductive Adhesives | Casting Compounds

Urethane Compound suits cable casting applications.

info@productnews.com (ThomasNet News) — Wed, 10 Mar 2004 07:39:54 -0500

AngstromBond® AB9271 room temperature curing polymer has 1:1 mix ratio with 20â�"30 min gel time. It cures into tough, flexible compound with mechanical and thermal shock resistance. Product is both toxicologically and environmentally safe. Composed of 100% solids, it will not cause inhalation or skin irritations. AngstromBond AB9271 is supplied in cartridges to facilitate application.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Casting Compounds

Epoxy Compound works in bedding and casting applications.

info@productnews.com (ThomasNet News) — Wed, 18 Sep 2002 07:47:29 -0500

Clear, flexible TRA-BOND 3010 bonds to ceramics, glass, most metals, and many plastics. It exhibits near-zero shrinkage and is resistant to water, weather, gases and vapors, petroleum products, mild acids and alkalis, salt solutions, and other organic compounds. Compound is suitable for aerospace and electronics applications.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management
Materials and Material Processing

Search for suppliers of: Casting Compounds | Epoxy Compounds

Casting Compound suits embedding and casting applications.

info@productnews.com (ThomasNet News) — Tue, 19 Mar 2002 07:39:08 -0500

Flexible TRA-BOND 240-2 low-viscosity, polyurethane-casting system, suitable for low-vacuum applications, is NASA outgassing approved, and has near-zero shrinkage, providing low residual stress. Compound bonds to ceramics, glass, metals, and many plastics. Fully cured adhesive acts as electrical insulator.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Casting Compounds

Compound is used for underfill and encapsulating applications.

info@productnews.com (ThomasNet News) — Tue, 27 Nov 2001 13:39:13 -0500

TRA-CAST 3108 two part epoxy casting paste works on wide range of surfaces, including glass, ceramics, metals, plastics, and many electronic materials. It is all-liquid, low viscosity product with good flow and wetting characteristics. Casting compound can be cured at room temperature with little or no shrinkage, and it resists all weather conditions, gases, galvanic action, petroleum fuels, alcohol, salt, acids and bases.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Porous Casting Sealing Compounds