ThomasNet Industrial Newsroom -

Ferrite Chip Beads provide EMI noise filtering effect.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 26 Nov 2008 07:51:00 -0600

Featuring monolithic assembly and 0.6 x 0.3 x 0.3 mm dimensions, LI0201 series offers impedance versus frequency characteristics with minimal DCR for EMI noise suppression on high-frequency or broadband digital signal lines. Design conserves mounting space, making beads suited for dense, compact circuit board construction in portable/handheld electronic devices. They can be placed close to EMI source or receptor of external interface or internal signal interconnection.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Materials and Material Processing

Search for suppliers of: EMI/RFI Shielding | Ferrite Beads

Ferrite Chip Beads suit portable electronic applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 13 Nov 2008 07:43:43 -0600

Supplied in 0.6 x 0.3 x 0.3 mm package, monolithic LI0201 series is comprised of EIA 0201 Ferrite Chip Beads accommodate dense, compact circuit board construction in handheld electronic devices. Impedance versus frequency characteristics minimize DCR for EMI noise suppression on high-frequency or broadband digital signal lines. Products can be placed close to EMI source or receptor of external interface or internal signal interconnection.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Ferrite Beads

Multilayer Ferrite Chip Beads minimize noise in less space.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 10 Oct 2008 07:39:28 -0600

Supplied in EIA 0201 case size (0.6 x 0.3 x 0.3 mm), BKP0603 series multilayer ferrite chip beads are designed for reducing power circuit noise in portable, battery-powered electronic equipment. Models BKP0603 HS220 and BKP0603 HS330, respectively, offer electrical performance characteristics that include 22 and 33 ohm impedance @ 100 MHz as well as 0.065 and 0.070 ohm RDC values. Maximum rated current for both models is 1.0 A.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Ferrite Beads

Pull Bar is suited for automatic arm systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 09 Oct 2008 07:36:15 -0600

Made of extruded aluminum, Pulltarps Universal Pull Bar can accept arm tarp with conventional pocket at back or tarp that uses hem tube. It features groove for hem tube that prevents tarp from bunching at corners, while adding strength to pull bar. Product is offered with urethane bumpers that slide on to pull bar to keep tarp centered and provide better coverage of load.

This story is related to the following:
Materials and Material Processing
Transportation Industry Products

Search for suppliers of: Aluminum Bar | Truck Tarps

Thick-Film Metallization Paste suits PV solar cells.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 12 Aug 2008 07:39:58 -0600

Made without cadmium for favorable environmental profile, DuPont(TM) Solamet® PV159 is used as basis for materials characterized by varying degrees of chemical reactivity. This enables solar cell manufacturers to match material to specific process conditions for frontside photovoltaic (PV) solar cell metallization.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Film Metallizing | Thick Film Paste

Nickel Alloy provides resistance to corrosive environments.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 11 Jul 2008 07:37:57 -0600

Providing corrosion resistance in both oxidizing and reducing conditions, Type 825 (UNS N08825, W. Nr. 2.4858) is nickel-iron-chromium alloy with additions of molybdenum, copper, and titanium. It is available in plate thicknesses from 0.1875-2.00 in. thick. Alloy is suited for chemical, petrochemical, food processing, nuclear fuel reprocessing, waste handling, oil and gas production, petroleum refining, pollution control, and steel pickling industries.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Chromium Alloys | Copper Alloys | Corrosion Resistant Alloys | Iron Base Alloys | Molybdenum Alloys | Titanium Alloys | Nickel Alloy Plate

Armor Steel targets international defense market.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 25 Jun 2008 07:40:02 -0600

Designed to meet MIL-DTL-46100E high-hard specifications for ballistic performance, ATI 500-MIL(TM) is suited for use in medium- and heavy-weight tactical vehicles, armored patrol cars, and above-deck structures on ships and aboard aircraft in perforated versions. Auto-tempered specialty steel does not require quench/temper treatment, and can handle hot/cold forming processes. Available in plate form in 3/16 to 1 in. thickness and up to 96 x 300 in. size, it can also be customized.

This story is related to the following:
Materials and Material Processing
Explosives, Armaments and Weaponry

Search for suppliers of: Armor Plates | Heavy Gauge Steel | High Strength Steel | Impact Resistant Steel

Production Service offers custom shapes for nickel plating.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 04 Jun 2008 07:40:39 -0600

Flexible with regards to formulas and quantities, pure metals and alloys can be provided in custom shapes and sizes to meet casting, plating, brazing, soldering, and other application requirements. In addition to standard nickel shapes, service deals with powders and shapes for Dipolarized Ni Anodes, Ni Cathodes, Low Melting Foundry Shot, as well as Ni-Copper and Cupro Nickel in standard and special compositions. Monel® (Nickel-Copper alloy) and Nickel-Silver are also available.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices Sponsored by: Lumera Corporation -
Materials and Material Processing
Health, Medical and Dental Supplies and Equipment

Search for suppliers of: Nickel & Nickel Alloy Shot | Nickel Powder | Nickel Silver | Nickel | White Metals | Jewelers' Metals | Nickel Silver Ingots | Nickel & Nickel Alloy Ingots | Jewelers' & Dental Ingots | Copper-Nickel Alloys | Cathodic Protection Equipment | Cathodic Anodes | Cathodes | Nickel & Nickel Alloy Bars | Plating Anodes | Nickel Anodes | Cathodic Protection Anodes | White Metal Alloys | Special Alloys | Nickel Silver Alloys | Nickel Copper Alloys | Nickel Alloys | Cupro Nickel Alloys

Pillow Blocks come in single, twin, and double models.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 19 May 2008 07:38:51 -0600

With aluminium body and black oxide finishing on exposed surfaces, Rino Roller Bearing Pillow Blocks offer corrosion resistance and are fully adjustable to allow radial clearance. Single units are self-aligning. Features include interchangeability, shaft protection, low friction properties, lithium based grease lubrication, and 60-250ºF operating temperatures.

This story is related to the following:
Materials and Material Processing
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Aluminum Blocks

Nickel Alloy withstands corrosive conditions.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 May 2008 07:40:42 -0600

Capable of handling welding applications where superior seawater corrosion resistance is required, Arcos 803 (ECuNi) is covered electrode designed for shielded metal arc welding of wrought or cast 70/30, 80/20, and 90/10 copper-nickel alloys. It is also utilized to weld clad side of copper-nickel clad steel. Arcos 803 is suited for desalination plant, offshore construction, and marine environment welding applications.

This story is related to the following:
Materials and Material Processing
Welding Equipment and Supplies

Search for suppliers of: Welding Electrodes

Flap Discs are manufactured from zirconia alumina grain.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 04 Apr 2008 07:33:09 -0600

With polyester/cotton backing material, XXL Z3 and compact Z3 flap discs offer edge and angled work surface solutions. Available in type 27 or 29 shapes with either 7/8- or 5/8-11 in. arbor holes, XXL Z3 line of flap discs consist of 12 discs in 4½ in. dia and 40, 60, and 80 grit sizes. Featuring flaps compressed at 4° angle, compact Z3 line of flap discs include 6 discs and come in 4½ in. dia, 40-80 grit sizes, and 7/8- or 5/8-11 in. arbor holes.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Materials and Material Processing

Search for suppliers of: Aluminum Discs | Flapdiscs

Nickel Alloy is designed for low/high temperature welding.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 04 Apr 2008 07:33:08 -0600

Arcos 392 (ERNiCrFe-6) is intended for cladding steel with nickel-chromium-iron weld metal and for joining steel and stainless steel to nickel-base alloys. Weld deposits can be age-hardened with degree of hardness depending on time and temperature. Alloy is suited for welding in cryogenic and elevated temperature (up to 1,800°F) environments such as power generation plants, petrochemical facilities, and furnace equipment.

This story is related to the following:
Materials and Material Processing
Welding Equipment and Supplies

Search for suppliers of: Welding Electrodes | Welding Wire

Structural Steel offers minimum yield strength of 1,200 MPa.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Apr 2008 07:37:20 -0600

Available in strip width of 1,500 mm and thicknesses of 4-8 mm, Domex 1200 high-strength, hot-rolled structural steel is designed for slender structures such as outer ends of crane booms and top profiles of dumper truck bodies that must be capable of withstanding high stresses. With low topography surface finish, it comes with machining properties and low content of alloying elements. Suited for bending and welding, steel can be bent to tight radii.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Hot Rolled Steel Strip | Structural Steel

High Nickel Alloy Electrodes withstands harsh environments.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 05 Mar 2008 07:44:03 -0600

Designed to meet demanding radiographic requirements, Arcos 8N12H (ENiCrFe-3) covered electrode offers high temperature strength and oxidation resistance. High carbon wire welds similar composition base metals to themselves and to carbon steel, and can be used for surfacing carbon steels. It is suited for welding in desalination plants, petrochemical facilities, and power generation plants, as well as in temperature critical conditions such as furnace equipment and pipe work.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Materials and Material Processing
Mounting and Attaching Products
Welding Equipment and Supplies

Search for suppliers of: Nickel Chromium Wire | High Carbon Steel Wire | Nickel Welding Wire | Welding Electrodes | Carbon Electrodes

Run Bar is intended for two-hand machine actuation.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 24 Jan 2008 07:37:47 -0600

Designed to comply with ANSI B11.19 and ISO 13851 (EN 574) Type IIIC requirements, DUO-TOUCH®l run bar interfaces with DUO-TOUCH SG 2-hand control modules, SC22-3 safety controllers, and other Type IIIC control systems. It comes with 2 preinstalled diverse-redundant, microcontroller-based photoelectric STB touch buttons that include continuous internal self-checking. Featuring 13 ga cold-rolled steel construction, bar suits general initiation of cycle on different equipment.

This story is related to the following:
Controls and Controllers Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Materials and Material Processing

Search for suppliers of: Steel Bars | Machine Controls | Safety Controls

Stainless Steel Plates resist corrosion.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 06 Dec 2007 07:44:25 -0600

Available in plate thicknesses from .1875-2.00 in., LDX 2101® consists of low-nickel, nitrogen-enhanced lean duplex stainless steel. Austenitic-ferritic structure provides resistance to uniform corrosion, pitting, crevice corrosion, and chloride stress-corrosion cracking. Alloy is suited for chemical and petrochemical, food and beverage processing, offshore oil and gas production, power generation, pulp and paper, and water and wastewater treatment industries.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Stainless Steel Plates

Adjusting Rods feature 303 stainless steel design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 28 Nov 2007 07:45:24 -0600

Measuring ½ in. diameter and available in variety of lengths, Stainless Steel Adjusting Rods are mounted in cross block, which allows both horizontal and vertical positioning of rods. Various styles are available, including blank, grooved, tapped, and milled flat. Applications include conveyors, conveying systems, and various types of equipment in packaging, pharmaceutical, automation, and material handling industries.

This story is related to the following:
Materials and Material Processing
Material Handling and Storage Sponsored by: Asymtek - Newsletter Ad

Search for suppliers of: Conveyor Components | Stainless Steel Rods

Cold-Rolled Steels offer various strengths and thicknesses.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 08 Nov 2007 07:44:18 -0600

Measuring 0.28-1.0 mm thick, Docol Hard 450Y-750Y offers yield strength of 450-700 N/mm² and is suitable for light fittings, white goods, and furniture. Next level, ranging from 1.5-4.0 mm thick with yield strengths from 850-1,000 N/mm², is suited for lightweight containers as well as load-bearing beams, tubes, and profiles for building. With tensile strengths from 1,500-1,700 N/mm², highest strength steel ranges from 0.42-1.92 mm thick and is suited for heavy wear applications.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: High Strength Steel | Cold Rolled Steel

Welding Wire consists of 44% nickel alloy.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 Nov 2007 07:48:14 -0600

Arcos 2216 (ERNiFeMn-CI) is developed for all position gas metal arc, gas tungsten arc, and high speed automatic gas metal arc welding of nodular, grey, spheroidal graphite, and malleable cast irons to themselves or to other materials including stainless steel, carbon steel, and various nickel alloys. It is used in welding high strength cast irons, automotive exhaust systems, and catalytic converters.

This story is related to the following:
Materials and Material Processing
Mounting and Attaching Products
Welding Equipment and Supplies

Search for suppliers of: Alloy Wire | Nickel Welding Wire | High Temperature Wire

Iron Material is formulated for abrasion resistance.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 Nov 2007 07:40:49 -0600

Offered as alternative to heat-treated materials such as Quench and Tempered and Austempered Ductile Irons, DuraDex Iron(TM) suits applications requiring abrasion resistance. It is offered in section sizes from ½-3¼ in., and Abrasion Resistance Factor (ARF) ranges from 5.0-6.2.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Iron | Abrasion Resistant Metals