ThomasNet Industrial Newsroom -

Tacky Flux targets package-on-package applications.

info@productnews.com (ThomasNet News) — Thu, 30 Jul 2009 08:33:27 -0500

No-clean, halide-free Multicore® TFN700B(TM) is Newtonian-based, and, therefore, eliminates shearing conditions associated with traditional tacky flux formulations, delivering flux transfer consistency and compensating for varied process conditions. Non-hydroscopic and non-corrosive, product has built-in blue color system that enables optical recognition of flux by pick-and-place systems, allowing visual verification of flux volume before placement on top component of POP package.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Non-Corrosive Flux | No Clean Flux

Submerged Arc Flux is suited for pipe mill welding.

info@productnews.com (ThomasNet News) — Thu, 21 May 2009 08:28:53 -0500

Combination of Lincolnweld® SPX80 flux and LA-81 wire meets F9TA4G-EG AWS classification and allows welds to exceed mechanical property requirements for Artic grade pipe. Designed for inner/outer diameter submerged arc welding, flux is suited for nondestructive testing and has H8 diffusible hydrogen levels for minimized coating defects on steel. Other SPX80/L-61, L-70, and LA-90 wire combinations are available, which can meet many AWS-classifications for multiple pass/2-run applications.

This story is related to the following:
Materials and Material Processing
Welding Equipment and Supplies

Search for suppliers of: Welding Flux

Submerged Arc Flux suits wind tower welding applications.

info@productnews.com (ThomasNet News) — Mon, 11 May 2009 08:32:07 -0500

Providing optimal results on variety of wind tower seam welding applications, Lincolnweld® WTX(TM) features low temperature impact properties and is capable of producing Charpy V-Notch test results exceeding 20 ft-lbf at -80°F. It suits twin and multi-arc ac and dc operations, and offers smooth bead profile. Providing circumferential and longitudinal butt and fillet welds, multi-purpose flux meets F7A8-EM12K-H8 AWS classification when used in combination with Lincolnweld L-61 electrode.

This story is related to the following:
Materials and Material Processing
Welding Equipment and Supplies

Search for suppliers of: Welding Flux

Flux is engineered for multi-arc welding operations.

info@productnews.com (ThomasNet News) — Thu, 19 Jun 2008 07:45:56 -0500

Suited for offshore, pressure vessel, shipbuilding, and structural fabrication industries, Lincolnweld® 888(TM) flux meets AWS H4 requirements for low diffusible hydrogen levels under 4 mL/100 g of weld metal. Designed for low alloy and mild steel as-welded and stress relieved applications, it can handle up to 5 welding arcs. Available in moisture resistant packaging, unit can remove slag from deep grooves and narrow gaps, and has cap-pass impact properties.

This story is related to the following:
Materials and Material Processing
Welding Equipment and Supplies

Search for suppliers of: Welding Flux

Repair Kit suits brazing and hard soldering applications.

info@productnews.com (ThomasNet News) — Fri, 16 May 2008 07:35:12 -0500

BrazeAl(TM) Aluminum Repair Kit is designed for aluminum heat transfer components such as radiators, heaters, condensers and charge air coolers, as well as aluminum components for other related and non-related industries. It includes 10 pieces of 5 different rods of several alloy/flux combinations - coated, uncoated, and cored, as well as low-temperature hard soldering flux and DayBraze alloy paste.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Soldering Flux | Brazing Flux | Repair Kits

Flux System features lead-free alloy.

info@productnews.com (ThomasNet News) — Tue, 07 Aug 2007 07:43:50 -0500

Suited for wave, reflow, selective, and hand (cored wire) soldering, Model SN100C flux system is available in low VOC, VOC-free, and alcohol-based formulations, in solder paste form and also as paste and liquid fluxes. It has synthetic base that gives it stability under high temperatures required by lead-free alloys. Flux works well in air or under nitrogen blanket and is compatible with many different finishes, including OSP, Ni/Au, Ag, and Sn.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: High Temperature Flux | Soldering Flux

Liquid Rework Flux suits lead-free and tin-lead soldering.

info@productnews.com (ThomasNet News) — Fri, 08 Dec 2006 07:43:29 -0500

Suited for re-working or post mass soldering applications, no-clean SR-7 is halide-free and rosin-free material designed for soldering on all PCB finishes, from lead-free HASL to immersion silver, tin ENIG, and OSP. Inherent low solids content ensures minimal post soldering residues are non-sticky, allowing for unhindered probe testing. Compliant with Bellcore SIR, flux comes in 1 and 5 liter containers as well as pen format.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Soldering Flux | No Clean Flux

Solder Pastes are specifically formulated for SAC 305.

info@productnews.com (ThomasNet News) — Mon, 11 Sep 2006 08:07:17 -0500

PrintPlus® P530 printing series and SolderPlus® D550 dispensing series consist of lead-free solder pastes with clear, colorless, no-clean flux residue that allows solder joints to be used in applications requiring shiny, cosmetic finish. Easing inspection and optimizing wetting capabilities, products are suited for SMT, mechanical, electronic, and electro-mechanical soldering applications.

This story is related to the following:
Materials and Material Processing
Test and Measuring Instruments

Search for suppliers of: Solder Paste | Soldering Flux | No Clean Flux

Liquid Flux is formulated for lead-free wave soldering.

info@productnews.com (ThomasNet News) — Wed, 12 Apr 2006 08:06:21 -0500

Combining freely rinsable, thermally stable synthetic polymers with activator system, 92-XCON OA liquid flux withstands high temperatures associated with lead-free processing without breaking down or losing its activity. Product delivers metallurgically sound solder joints with brilliant shiny appearance even under high thermal load. Categorized as IPC-Jstd-004 ORH0 product, flux passes Silver Chromate test for halides.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Soldering Flux

VOC-free Flux eliminates presence of solder balls.

info@productnews.com (ThomasNet News) — Fri, 20 Jan 2006 07:05:32 -0500

Suited for lead (Pb)-free wave soldering applications, Cobar 396-FTA eliminates solder balls as well as wetting and wicking issues, even on OSP assemblies. Product has less than 2% solids, yielding clean post solder surfaces. It is suited for use on most types of circuit boards.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Volatile Organic Compound (VOC)-Free Flux | Printed Circuit Flux

Solder Flux targets Pb-free wave soldering.

info@productnews.com (ThomasNet News) — Wed, 13 Jul 2005 08:01:43 -0500

Suited for soldering surface-mount, mixed-technology, and through-hole electronics assemblies, 1075-EXR is water-based and non-flammable, eliminating special storage requirements and minimizing VOC emissions. Product provides surface wetting, eliminates cleaning, and minimizes solder balling. It can also be used for Sn/Pb assemblies.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Soldering Flux

Submerged Arc Flux suits offshore welding applications.

info@productnews.com (ThomasNet News) — Fri, 10 Jun 2005 08:16:11 -0500

Suited for submerged arc welding, Lincolnweld® 888 highly basic flux is classified to AWS H4 requirements for diffusible hydrogen levels under 4 mL/100 g of weld metal. It exhibits weld metal toughness and features packaging properties that positively impact moisture resistance. Product is suited for pressure vessel, shipbuilding, and structural fabrication as well as narrow gap applications requiring deep-groove slag removal.

This story is related to the following:
Materials and Material Processing
Welding Equipment and Supplies

Search for suppliers of: Welding Flux

Solder Powder/Flux allows soldering irons to be re-tinned.

info@productnews.com (ThomasNet News) — Tue, 24 May 2005 07:35:27 -0500

Multicore® TTC-LF consists of lead-free grade solder powder and flux, formed into shape of thick disk for cleaning and de-wetting soldering irons. Users wipe tip of iron across surface of TTC-LF to produce local melting, and then wipe on damp sponge. Suited for lead and lead-free applications, product features activators that thermally decompose into inert components, and ability to clean heavily oxidized metal surfaces such as copper and iron plated soldering tips.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Soldering Flux | Solder Powder

Liquid Fluxes target consumer electronics applications.

info@productnews.com (ThomasNet News) — Mon, 23 May 2005 08:40:24 -0500

Multicore® MF101 and MF300 are VOC-free, no-clean liquid fluxes suited for low solderability surfaces such as oxidized copper. They minimize or eliminate solder balling and are non-flammable. To complement lead-free wave soldering applications, MF200 helps eliminate micro solder balling, leaves minimal residue, and offers maximum process window. No-clean, sustained activity flux, MFR301 is suited for fast soldering on conventional leaded and SMD components.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Soldering Flux | Volatile Organic Compound (VOC)-Free Flux | No Clean Flux

No-Clean Flux is compatible with all solder alloys.

info@productnews.com (ThomasNet News) — Tue, 15 Mar 2005 07:40:27 -0500

Designed for surfaces with poor solderability, Multicore® MF210 is resin-free and halide-free. Sustained activity flux works over range of solder resists and is compatible with rosin and OSP-based surface preservatives. Material allows for high-speed soldering on conventional leaded and surface-mount components and offers good through hole penetration. No-clean characteristic ensures minimal residues so there is no interference with test probes.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Soldering Flux | No Clean Flux

Low-VOC Flux suits lead-free soldering applications.

info@productnews.com (ThomasNet News) — Thu, 20 Jan 2005 07:48:04 -0500

Able to withstand temperatures required for lead-free soldering, 94QMB9 maintains its wetting characteristics and has evaporative formula that reduces preheating time and potential for oxidation and splatter. No-clean flux contains DI-water and alcohol and features non-ionic activator system that exhibits block-polymer functionality. Product is suited for lead-free soldering in wave and selective soldering systems.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Soldering Flux | No Clean Flux

Soldering Flux offers anti-slump characteristics.

info@productnews.com (ThomasNet News) — Wed, 01 Dec 2004 07:41:42 -0500

Colorless, no-clean P520 Flux leaves clear residue for cosmetic joint finish. Printed or dispensed solder paste deposits retain shape through reflow cycle without slumping or bridging, making flux suited for fine pitch, no-clean electronic and electro-mechanical soldering applications. Flux is environmentally safe and exceeds IPC Joint Industry Standards J-STD-004A.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Soldering Flux

Wave Solder Flux suits Pb-free applications.

info@productnews.com (ThomasNet News) — Thu, 30 Sep 2004 07:38:35 -0500

No-clean, halide-free 3592-35 provides heat stability for high temperatures required in Pb-free wave soldering of mixed-technology and through-hole electronic assemblies. Solvent-based formulation offers wide process window and minimizes solder balling. It can be used with tin/copper, tin/silver/copper, and tin/lead alloys.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Soldering Flux | No Clean Flux

Interconnect Flux is water-soluble.

info@productnews.com (ThomasNet News) — Thu, 29 Jul 2004 07:38:16 -0500

Designed for use in BGA bumping and board level attachment, WS-364 water-soluble paste-flux can be applied by pin-transfer or stencil printing. It can be cleaned using room-temperature water and offers high yield in BGA bumping process. Available in syringes or cartridges, halide-free product is suitable for Sn/Pb and Pb-free applications.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Water Soluble Flux

No-Clean Rosin Flux is solvent-based.

info@productnews.com (ThomasNet News) — Tue, 25 Nov 2003 07:36:51 -0500

Loctite® Multicore® MFR301 sustained activity liquid flux, designed for wave soldering PCBs, is suited for dual wave processing. Rosin/solvent synergism ensures optimum drainage behavior at exit of wave, minimizing bridging, spiking, and mid-pad solder balling. Product leaves thin, protective coating of rosin on soldered PCBs and leaves them dry to touch with slight rosinous luster. It passes J-STD-004 SIR and Bellcore electromigration tests.

This story is related to the following:
Materials and Material Processing

Search for suppliers of: Printed Circuit Flux | No Clean Flux