ThomasNet Industrial Newsroom - Cleaning Products & Equipment

Drum Cleaner helps reduce downtime for flexographic printing.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 02 Jul 2009 08:39:01 -0400

Engineered to be automatic roll cleaning system, CI Drum Cleaner is designed for companies printing wide web packaging material and manufacturers of central impression (CI) printing presses. It performs thorough wiping of drum to remove ink, dirt, and slip from its surface. Able to retrofit to most manufacturers' CI printing presses, solution allows for full 24 hr of printing without needing to stop press for manual drum cleaning.

This story is related to the following:
Textile Industry Products
Cleaning Products and Equipment
Printing and Duplicating Equipment

Search for suppliers of: Web Cleaning Systems | Printing Equipment & Supplies | Web Cleaners | Roller Cleaners

Cold-Water Pressure Washers offer wet-sandblasting systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 26 Jun 2009 08:27:57 -0400

Respectively powered by 3 and 5 hp electric motors, Super Max(TM) 8700 WS and 8720 WS are designed for commercial use in removing rust, corrosion, and heavy deposits. Included wet sandblasting kit consists of flexible 15 ft sand pickup tube, sand point, and venturi head that creates uniform blast pattern and increases sand velocity. While Super Max 8700 WS produces pressures to 1,500 psi and flow rates to 3 gpm, Super Max 8720 WS generates pressures to 2,000 psi and flow rates to 4 gpm.

This story is related to the following:
Cleaning Products and Equipment

Search for suppliers of: Pressure Washers

Carpet Cleaners offer steam temperatures up to 210°F.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 25 Jun 2009 08:28:47 -0400

Suited for continuous cleaning of low-pile carpets, XTreme Power® XPH-9650 carpet cleaners feature 2 inline heating elements, dual 3-stage motors, air flow of 200 cfm, and water lift of 150 in. They come with 12 in dual-jet wand, 100 ft of solution hose, and 100 ft of vacuum hose, along with 17 gal solution tank and 15 gal recovery tank. Machines also include quick-drying technology and optional wands are available for upholstery/spot cleaning and stairs.

This story is related to the following:
Cleaning Products and Equipment

Search for suppliers of: Carpet Cleaning Machinery

High Pressure Steam Cleaners targets industrial customers.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 24 Jun 2009 08:28:16 -0400

Including replaceable heating element technology, KleenJet® Ultra 10110C and KleenJet® Ultra 10130CV offer continuous refill via either 20 L water chamber or direct water feed, which accepts hose line for long periods. They feature pressure levels of up to 150 psi, steam temperatures of up to 360º F, capacious 14 L boiler, as well as 20 L detergent chamber. KleenJet® Ultra 10130CV comes with wet/dry vacuum with 3,200 mm of column lift, water filtration, and 35 L extraction chamber.

This story is related to the following:
Cleaning Products and Equipment

Search for suppliers of: Industrial Vacuum Cleaners | High Pressure Cleaners | Steam Cleaners | Wet/Dry Vacuum Cleaners

Brushes offer diamond abrasive floor preparation system.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 22 Jun 2009 08:25:46 -0400

Diamabrush(TM) System is comprised of 4 tools, each designed to be used on standard low pressure commercial cleaning machines for concrete floor polishing, mastic removal, and hardwood prep. A 25 grit spring metal tool prepares concrete floor for epoxy recoating, and 6 tools, from 100-2,00 grit, are used to grind and hone. Other offerings include Diamabrush(TM) Mastic Removal Tool and Diamabrush(TM) Hardwood Prep Tool to remove polyurethane off of hardwood floors.

This story is related to the following:
Cleaning Products and Equipment
Machinery and Machining Tools

Search for suppliers of: Floor Machine Brushes | Concrete Scrubbing Brushes | Abrasive Brushes

End Brushes feature nickel-plated cup.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 22 Jun 2009 08:25:46 -0400

Stem mounted end brush with nickel-plating has high melting point and conforms to military specifications for nuclear applications. It is suited for weld preparation and cleaning, cleaning and finishing recessed areas or ID's, and die, mold and tool cleaning and polishing. Crimped wire (solid end) brushes are available in ½, ¾, and 1 in. dia with trim lengths ranging from 7/8 to 1 1/8 in., while knot wire (hollow end) brushes are available in ¾ and 1 1/8 in. with 7/8 in. trim length.

This story is related to the following:
Machinery and Machining Tools
Portable Tools
Cleaning Products and Equipment

Search for suppliers of: Abrasive Brushes | End Wire Brushes | Industrial Brushes

Carpet Extractors are available in 3 pressure capacities.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 22 Jun 2009 08:25:44 -0400

Equipped with twin two-stage, 1.6 hp vacuum motors, Marathon Carpetrinser family of upright extractors deliver fast/thorough cleaning and drying. Models 2-100, 2-200, and 2-400 provide 100, 200, and 400 psi, respectively. Model 2-400 also includes Perfect Heat(TM) technology, which generates temperatures up to 212°F with no additional electrical power needs.

This story is related to the following:
Cleaning Products and Equipment

Search for suppliers of: Carpet Extractors | Carpet Cleaning Machinery

Steam Cleaner generates pressure levels of up to 75 psi.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 16 Jun 2009 08:29:09 -0400

Including 2 L boiler tank, KleenJet® 300CS combines it with 2 L self-regulating continuous refill tank, which yields total capacity of 4 L. It can provide steam temperatures of up to 310°F, while variable pressure dial lets operators adjust pressure depending on requirement. Attachments include 10 ft detachable steam hose, heavy duty extension rods, steam squeegee for mirrors and windows, and assortments of brushes.

This story is related to the following:
Cleaning Products and Equipment

Search for suppliers of: Steam Cleaners | High Pressure Cleaners

Cleaning Blade optimizes conveyor belt performance.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 16 Jun 2009 08:29:07 -0400

Eraser V6 Profile blade features optimized attack angle, allowing for consistent wear over life of blade and eliminating flat spotting. Features include inner ratchet catch manufactured of aluminum, and blade insert that creates stable platform for mounting blade to cleaner system. Perma-Torque tensioner incorporates embedded hex rod with rounded end and radii on all sharp corners. Durable power coat finish provides corrosion resistance in field.

This story is related to the following:
Cleaning Products and Equipment
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!

Search for suppliers of: Cleaner Blades | Conveyor Belt Cleaners

Spray Cleaner targets urinal systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 16 Jun 2009 08:29:06 -0400

Developed for both conventional and no-water urinal systems, EnviroClean(TM) safely breaks down urine residue deposits so that they are transported directly down drain or into trap insert. Once sprayed, there is no need to wipe or clean off. Prolonged use of EnviroClean can help minimize buildup, extending no-water trap's life while keeping urinal clean and odor-free.

This story is related to the following:
Cleaning Products and Equipment

Search for suppliers of: Toilet Bowl Cleaners

Non-Solvent Degreaser has zero VOCs.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 11 Jun 2009 08:34:04 -0400

Available in 1 gal container, 5 gal pail, and 55 gal drum, T-91 is biodegradable and has neutral pH of 7.3-7.7. It is non-flammable, non-toxic, and is suited for traditional solvent cleaning, basin style part washers, and dip tanks. Product is environmentally safe and conforms to VOC regulations of CARB (California Air Resources Board), OTC (Ozone Transport Commission), LADCO (Lake Michigan Air Directors Consortium), and SCAQMD (South Coast Air Quality Management District).

This story is related to the following:
Cleaning Products and Equipment
Green & Clean Sponsored by: Siemens Corporation - Answers for the Enviornment

Search for suppliers of: Industrial Degreasers | Biodegradable Degreasers

Grease Removing System mounts to oil skimmer.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 09 Jun 2009 08:25:06 -0400

MatBuster(TM) accessory to Grease Grabber® oil skimmer churns water surface and breaks up matted grease, optimizing operational efficiency of skimmer. It uses energy created by skimmer's moving belt to chop grease mat into removable chunks. Product's SS blades mount to tail pulley of oil skimmer, located 1.5 ft below water surface, allowing it to remove grease and oil at up to 160 gph. Unit is suited for steel mill and food processing operations.

This story is related to the following:
Waste Handling Equipment
Chemical Processing and Waste Management
Cleaning Products and Equipment

Search for suppliers of: Wastewater Treatment Equipment | Oil Recovery Systems | Grease Removal Systems

Steam Pressure Washers suit auto detailing applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 09 Jun 2009 08:25:01 -0400

Producing pressure level of 1,000 psi and steam temperatures to 300°F, Super Max® 6230SCW and 6120SCW deliver industrial-strength cleaning that will not melt or scratch paint or other delicate surfaces. Flow rate of .5 gpm will not harm vehicle surfaces and generates minimal water waste. Powered by electricity, 6120SCW Mobile Car Wash (110-120 V, 60 Hz) and 6230SCW Mobile Car Wash (220-240 V, 60 Hz) will remove dirt, mud, brake dust, bugs, tar, salt, grease, oil, and tree sap.

This story is related to the following:
Cleaning Products and Equipment
Green & Clean Sponsored by: Siemens Corporation - Answers for the Enviornment

Search for suppliers of: Pressure Washers

Pressure Washers feature phosphatizing systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 09 Jun 2009 08:25:01 -0400

Offering pressure levels up to 1,000 and 700 psi, respectively, Super Max® 15200AF and 15400AF can operate as standard pressure washers or as phosphatizing systems to prevent rust or corrosion on metal surfaces prior to finishing. Tri-mode technology allows equipment to provide wet steam, hot water, and cold water cleaning. Available in oil-, diesel-, or kerosene-heated configurations, washers provide hot water temperatures of 180-220°F and steam temperatures up to 330°F.

This story is related to the following:
Cleaning Products and Equipment

Search for suppliers of: Pressure Washers

Washing Machine sanitizes intermediate bulk containers.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 08 Jun 2009 08:30:30 -0400

Model IBC-1000 is suited for washing and sanitizing IBCs and other large volume totes and bins that have access holes in top and drain holes in bottom. It features retractable spray arm that protrudes into container to clean inside and series of oscillating wash arms to clean outside. Wash cycles are fully adjustable for varying soil conditions, with typical cycle time of 10 min. Optional steam exhaust fan is also available.

This story is related to the following:
Cleaning Products and Equipment

Search for suppliers of: Washing Machinery | Sanitizers

Stencil and Ink Remover contains no VOCs.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Jun 2009 08:33:42 -0400

Designed for use in dip tanks and with screens pressure-washed clean after soaking, CPS Aquastrip 21 can also be used manually with spray or brush and as well as in automatic reclaiming equipment. It removes plastisol, some residual ink staining from screen, and other general textile and UV inks simultaneously with stencil. Product is available in single pack as concentrate with recommended water dilution ratio of 1:10.

This story is related to the following:
Cleaning Products and Equipment
Green & Clean Sponsored by: Siemens Corporation - Answers for the Enviornment

Search for suppliers of: UV Ink Removers | Ink Removers

Pressure Washer Wands feature pivoting nozzle.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Jun 2009 08:28:49 -0400

Available in 40 and 28 in. models, Hyde Pivot Pro-Grade Nozzle Wands are rated at 4,000 and 3,200 psi, respectively. Users twist handle to activate pivoting nozzle feature. Because head of wand pivots 90°, there is no need to stoop, bend, or kneel to get hard-to-reach places, minimizing chance of worker strain or injury.

This story is related to the following:
Cleaning Products and Equipment
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies
Portable Tools

Search for suppliers of: Wands | Pressure Washer Accessories | Water Blasting Nozzles | Spray Guns

Rider-Scrubber has 67 in. wide cleaning path.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Jun 2009 08:28:46 -0400

Featuring counter-rotating cylindrical brushes that sweep and scrub in one pass, Condor(TM) XL cleans floors of distribution centers, manufacturing plants, warehouses, beverage distributors, and food processing facilities. Front-wheel steering provides maneuverability, and Advance AXP(TM) onboard detergent dispensing system delivers chemicals at specific dilution ratio. Other features include 100 gal solution tank and side brooms with Advance DustGuard(TM) dust suppression system.

This story is related to the following:
Cleaning Products and Equipment
Machinery and Machining Tools

Search for suppliers of: Rider Sweepers | Floor Scrubbers | Sweeping Machinery | Floor Cleaning Machinery | Floor Maintenance Equipment & Supplies

Electric Powered Washers provide temperatures of up to 330°F.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Jun 2009 08:31:25 -0400

Heated with propane, Super Max® 12200SP and 12300SP include Super High-Temperature Optimized Technology® for wet steam. Powered by 5 hp electric motorSuper, Max®12200SP offers pressure levels of up to 2,000 psi and flow rates of up to 4 gpm. Model 12300SP provides pressure levels of up to 3,000 psi, flow rate of up to 5 gpm and is powered by 10 hp motor. Available on wheels, units feature 25 ft steam hose, 3 ft trigger wand, steam nozzle, and high-pressure chemical injection.

This story is related to the following:
Cleaning Products and Equipment

Search for suppliers of: High Pressure Washers

Steam Cleaners are aimed at industrial customers.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 01 Jun 2009 08:22:53 -0400

KleenJet® Ultra 8365C and Ultra 8485CV deliver 120 psi pressure and up to 329°F steam temperatures. Both models feature 14 L boiler, 10 L detergent chamber, and continuous refill via either 10 L water chamber or direct water feed from hose for long periods of non-stop use. Model 8485CV includes wet/dry vacuum with 2,200 mm of column lift, water filtration and 14 L extraction chamber. Systems utilize replaceable heating element technology.

This story is related to the following:
Cleaning Products and Equipment

Search for suppliers of: High Pressure Cleaners | Steam Cleaners