ThomasNet News� -

Cutting/Grinding Fluid targets aerospace manufacturing.

info@productnews.com (ThomasNet News�) — Wed, 06 Mar 2013 08:29:39 -0400

Intended for use by aerospace manufacturing industry, ECOCOOL 7830 B water-miscible cutting and grinding fluid is stable in hard water and low foaming in soft water without use of silicone defoamers. Fluid is designed for high-speed machining of aerospace aluminum and titanium alloys as well as ferrous materials. This product is formulated with bio-resistance for extended service life, lubricity to protect tools against wear, and detergency for machine and part cleanliness.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Metal Cutting Fluids

Low Foaming Cutting Fluid boosts surface finish.

info@productnews.com (ThomasNet News�) — Fri, 03 Aug 2012 08:30:59 -0400

Designed to exceed stringent coolant criteria in metalworking, ValCool(TM) VPLFC Cutting Fluid provides foam control properties, suited for high pressure systems rated 1,000 psi and up. Heavy-duty, non-chlorinated, semi-synthetic formula optimizes tool life and surface finish, and helps boost overall system cleanliness, rejecting tramp oils and maintaining stable pH levels. Product is available in 5 gal pails to 55 gal drums.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad
Lubricants

Search for suppliers of: Metalworking Lubricants | Metal Cutting Fluids | Metalworking Coolants | Metalworking Oils

Water-Soluble Oil Coolant resists microbials.

info@productnews.com (ThomasNet News�) — Thu, 24 Feb 2011 08:30:39 -0400

Hard water-stable and resistant to bacterial and fungus, ULTRACUT Pro is effective in light, moderate, and heavy-duty applications, including machining, cutting, grinding, milling, broaching, threading, and turning. Tight emulsion ensures consistent lubrication and cooling for optimized tool life and surface finish. Available in 5 or 55 gallon containers, ULTRACUT Pro contains no boron, phenol, nitrites, triazines, sulfur, copper, or SARA 313 reportable chemistry.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Cutting & Grinding Coolants | Metal Cutting Fluids

Hybrid Metalworking Fluid offers microbial control.

info@productnews.com (ThomasNet News�) — Wed, 04 Aug 2010 07:36:56 -0400

Designed for moderate to heavy-duty operations, CIMTECH 609® is suitable for use with most aluminum alloys, titanium, exotic alloys, cast iron, carbon steels, high-speed steel, high alloy steels, and stainless steels. Product offers drawability and biological protection for use in recirculating systems. With no smoke and minimal residue, low-misting fluid leaves no slippery film on parts, machinery, or floor. Corrosion inhibitors allow use on both ferrous and non-ferrous applications.

This story is related to the following:
Lubricants
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Metalworking Lubricants | Tapping Fluids | Metal Cutting Fluids | Grinding Lubricants

Metal Cutting Oil performs in demanding applications.

info@productnews.com (ThomasNet News�) — Mon, 10 May 2010 08:35:27 -0400

Containing sulfur, chlorine, wetting, and anti-weld agents, light-colored Cut 'N Cool is suited for stainless steel, carbon steel, aircraft steel, cast iron, aluminum, and other hard alloys. Product's petroleum base helps prevent rust on machinery, tooling, and materials. Formulated to meet stringent environmental regulations, Cut 'N Cool comes in recyclable aerosol package.

This story is related to the following:
Lubricants
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Metalworking Oils | Cutting Oils | Metalworking Lubricants | Cutting Lubricants | Metal Cutting Fluids

Water Soluble Metal Cutting Oil has no harmful additives.

info@productnews.com (ThomasNet News�) — Wed, 24 Feb 2010 08:31:04 -0400

Formulated with Extreme Pressure additive, CYCLE HD is suited for moderate to heavy-duty machining of ferrous and non-ferrous metals. Product resists bacteria, extending sump life and providing odor control. Fluid is prepared with small oil droplets that prevent separation of oil from water, which leads to stable emulsion. Low foaming and low misting, CYCLE HD offers optimal performance in sawing, drilling, milling, tapping, and turning applications.

This story is related to the following:
Lubricants
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Metalworking Lubricants | Metalworking Oils | Metal Cutting Fluids

Cutting Fluids come in concentrated form.

info@productnews.com (ThomasNet News�) — Mon, 01 Feb 2010 08:30:36 -0400

Providing tramp oil rejection and control of bacteria and mold, semi-synthetic Kool-ALL Ultra® extends sump life. Power-Cut Ultra® soluble oil has emulsifiers that mix with water and can handle alloy steels such as 300 series stainless steel. Featuring low foaming tendency, Synthetic Kleen-Kool Ultra® optimizes fines release and hard water tolerance, minimizing grinding swarf and maintaining unclogged grinding wheel. All use recyclable containers and liners that are tamper-resistant.

This story is related to the following:
Green & Clean
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad
Lubricants

Search for suppliers of: Metal Cutting Fluids | Soluble Oils

Metal Removal Lubricants are low-foaming and bio-resistant.

info@productnews.com (ThomasNet News�) — Thu, 30 Jul 2009 08:33:23 -0400

Formulated to generate minimal foam and be used continuously for years with minimal biological degradation, Multan® B 236(TM) and B 414(TM) are semi-synthetic, water-soluble solutions for machining and grinding ferrous and non-ferrous alloys. Multan B 236, suited for most water conditions and multi-metal applications, offers optimal performance on cast iron and steel. With additional properties, Multan® B 414 contains more oil and is formulated with additional extreme pressure additives.

This story is related to the following:
Lubricants
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Metalworking Lubricants | Metal Cutting Fluids

Metal Cutting Fluids resist bacteria and foaming.

info@productnews.com (ThomasNet News�) — Mon, 04 May 2009 08:37:48 -0400

Suited for machining and grinding ferrous and non-ferrous alloys, semi-synthetic Multan® B 236(TM) and B 414(TM) can be used continuously for years with minimal biological degradation. Multan® B 236(TM) is intended for cast iron and steel, which require rapid cooling, corrosion protection, and moderate lubrication. Multan® B 414(TM) is similar but contains more oil and additional extreme pressure additives making it suited for aluminum, stainless steel, titanium, inconel, brass, or copper.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad
Lubricants

Search for suppliers of: Metal Cutting Fluids | Metalworking Lubricants

Metalworking Coolant has ultra low foaming formulation.

info@productnews.com (ThomasNet News�) — Thu, 15 Jan 2009 08:35:20 -0400

Containing mineral oil and extreme pressure additives, semi-synthetic KoolRite(TM) 2365 coolant can be used with cast iron, all steels, and non-ferrous metals with exception of magnesium. It is especially suited for use on aluminum. In addition to controlling foam from high pressure chip removal systems, KoolRite 2365 will not stain non-ferrous metals and is formulated with JTM BioArmor(TM) Technology, making it resistant to bacterial and fungal growth, yielding long sump life.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Metalworking Coolants | Metal Cutting Fluids

Cutting Fluid has low foaming/low mist properties.

info@productnews.com (ThomasNet News�) — Thu, 16 Oct 2008 07:54:33 -0400

Effective in range of operations from surface and centerless grinding to broaching, gear hobbing, surface, pocket, and thread milling, TRIM® E906 emulsion has balance of cooling and lubrication that extends tool life and surface finishes. Tight emulsion reduces carryoff and gets fluid to point of cut. E906 does not contain phenol, is removed with water, working solution, or TRIM® CLEAN aqueous cleaners, and can be recycled or disposed of with conventional techniques and equipment.

This story is related to the following:
Lubricants
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad
Materials and Material Processing

Search for suppliers of: Cutting Lubricants | Metal Cutting Fluids | Emulsions

Cutting Fluid utilizes renewable resources.

info@productnews.com (ThomasNet News�) — Fri, 01 Feb 2008 07:44:45 -0400

Combining qualities of synthetics with those of soluble oils, KoolRite(TM) 2580 provides light oily residual film that lubricates and protects machine components. Non-foaming coolant helps prevent rust and will not split or separate. Formulated with Bio Armor(TM) technology, product is resistant to bacterial and fungal growth. It is suited for machining high-temperature and high nickel alloys, stainless steel, titanium, aluminum, and exotic metals.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Metal Cutting Fluids | Metalworking Coolants

Metalworking Coolant is compatible with all aerospace alloys.

info@productnews.com (ThomasNet News�) — Fri, 07 Dec 2007 07:44:27 -0400

Meeting stringent nuclear and aerospace chemical content and machining requirements, TRIM® C350 is suited for machining and grinding of aircraft air frame and power plant parts/components. Using synthetic ester technology, synthetic coolant does not use conventional sulfur or chlorine based EP additives. Product's pH neutral and less than 100 ppm total chloride working solutions provide corrosion and stain resistance even on most sensitive alloys.

This story is related to the following:
Lubricants
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Metalworking Fluids | Cutting & Grinding Coolants | Metalworking Coolants

Food-Grade Lubricant has environmentally safe formulation.

info@productnews.com (ThomasNet News�) — Wed, 31 Oct 2007 07:44:36 -0400

Natural-/vegetable-based metalworking oil, Accu-Lube FG-2000, is suited for use in food and medical applications requiring machining, drilling, and tapping. It provides lubricity to cutting edge of any tool for sawing of solids up to 6 in. dia as well as tubing of any size. Consumed in cutting process, non-toxic and biodegradable product eliminates need for clean up, disposal, and flood coolant. It is safe for use on all metals and certified by NSF as safe for incidental food contact.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad
Lubricants
Food Processing and Preparation

Search for suppliers of: Metalworking Lubricants | Biodegradable Metal Cutting Fluids | Food Grade Lubricants

Neat Cutting and Grinding Fluids offer anti-wear properties.

info@productnews.com (ThomasNet News�) — Thu, 16 Nov 2006 07:43:41 -0400

Offered in 3 different viscosity grades, Mobilmet® 760 Fluids are suitable lubricants for cutting stainless steel, titanium, nickel alloys, and tool steel. Anti-wear properties help minimize unscheduled maintenance and extend component service life. Compatible with Mobil hydraulic, spindle, and slideway oils, heavy-duty fluids withstand rigors of difficult applications, such as broaching, gear manufacturing, and tapping.

This story is related to the following:
Lubricants
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Metal Cutting Fluids | Grinding Lubricants | Cutting Lubricants

Grinding Fluids are able to run at low concentrations.

info@productnews.com (ThomasNet News�) — Mon, 14 Aug 2006 08:14:50 -0400

Offered in 2 versions, Grindex water miscible synthetic grinding fluids are suited for steel and iron. Mineral oil-free products provide optimal rinsing and settling behavior required in grinding operations. While Grindex 10 is considered common version, Grindex 10CO is highly inhibited for carbide grinding to prevent cobalt leaching. Both offer corrosion protection and are engineered to ensure good washing action and foam protection.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Metal Cutting Fluids

Fluid suits magnesium machining.

info@productnews.com (ThomasNet News�) — Fri, 23 Jun 2006 07:56:56 -0400

Facilitating part machining with minimized waste, Blasocut® BC37MG solves issues of instability, separations, and short fluid life normally associated with machining magnesium. Mineral oil-based, chlorine-free liquid tool is also suited for other ferrous and non-ferrous materials such as brass and/or bronze, as it will not form insoluble lead soaps.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Metal Cutting Fluids

Cutting Fluid's foaming action provides high visibility.

info@productnews.com (ThomasNet News�) — Wed, 30 Mar 2005 08:43:42 -0400

Usable as stand-alone or booster fluid, Tap Magic Xtra-Foamy is suited for use on all metals up to 45 Rockwell hardness. Foamy consistency provides visibility so that users can gauge application rate and fluid presence. Offered in 17 oz aerosol can, product contains EP-X3 proprietary additive and eliminates metal hardening during cutting operation. Single application stays with tool and workpiece for cuts of long duration.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Synthetic Cutting Fluid is formulated for hard metals.

info@productnews.com (ThomasNet News�) — Thu, 17 Mar 2005 07:39:36 -0400

Mineral oil-free Synergy 15â"¢ cutting fluid is suitable for machining and grinding hard metals and copper alloys when oil free coolant is required. It can be used with hard or soft water, provides foam control, and achieves long term sump life without use of bactericides.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Oil Absorbent is suited for use in ferrous machining.

info@productnews.com (ThomasNet News�) — Fri, 19 Dec 2003 07:39:10 -0400

Castrol Syntilo® 2109 oil-absorbing synthetic fluid absorbs 1â�"2% tramp oil to enhance corrosion protection and improve machining lubrication. When contaminated with tramp oils, low-foaming product resists microbial attack and remains clean-running.

This story is related to the following:
Chemical Processing and Waste Management
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad