ThomasNet Industrial Newsroom -

Honing Tools produce tight tolerances.

info@productnews.com (ThomasNet News) — Fri, 16 Oct 2009 08:40:25 -0500

Suited for engine cylinders and cylinder liners with bore diameters from 2.25-12 in., Precision Hone Tooling System incorporates integral air gaging with automatic shutdown mechanism for non-contact, in-process bore sizing to tolerances of 0.0002 in. Tools use custom-designed and fitted multi-stone tool heads, with number and placement of stones dictated by application. Three abrasive options include diamond or CBN, aluminum oxide/silicon carbide, and abrasive impregnated filament.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Honing Tools | Cubic Boron Nitride (CBN) Tools | Honing Abrasives

Autobody Prep Kit suits technicians and DIYers.

info@productnews.com (ThomasNet News) — Fri, 28 Aug 2009 08:33:24 -0500

Packaged in blow-molded case, StartingLine Complete Autobody Prep Kit is comprised of primer spray gun and 6 in. palm sander. Chrome-plated HVLP primer gun has 1.8 mm fluid tip setup and 600 cc aluminum gravity cup and uses 13 cfm @ 30 psi inlet pressure. With Velcro pad and free speed of 8,500 rpm, palm sander operates at max inlet pressure of 90 psi. Kit also includes required wrenches for spray gun and sander as well as set of 6 in. sanding discs in assorted grits.

This story is related to the following:
Portable Tools
Machinery and Machining Tools
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Transportation Industry Products Sponsored by: Terra Environmental Technologies, A Terra Industries Co. - Untitled

Search for suppliers of: Spray Guns | Disc Sanders | Sanders | Sanding Machinery | Paint Guns | Automotive Body Repair Supplies

Right Angle Disc Sander is optimized for power, performance.

info@productnews.com (ThomasNet News) — Wed, 12 Aug 2009 08:30:00 -0500

Powered by 1.3 hp air motor that promotes smooth and controlled operation, Model 52657 may be used on various materials for sanding and deburring applications, surface conditioning, weld preparation, and removing paint/rust. Tool operates at 6,000 rpm and accepts 7 in. dia abrasive discs with 7/8 in. center hole. While vibration-dampening side handle is removable for left- or right-hand use, exhaust system rotates 360° to accommodate operator.

This story is related to the following:
Portable Tools
Machinery and Machining Tools

Search for suppliers of: Disc Sanders | Sanding Tools | Sanders | Sanding Machinery | Finishing Machinery

Abrasive Ceramic Media is suited for use on delicate parts.

info@productnews.com (ThomasNet News) — Tue, 04 Aug 2009 08:28:55 -0500

Characteristically lightweight and clean, all-natural DURALITE® is formulated without synthetics or resins to ensure instant, constant, and aggressive cutting action throughout mass finishing operations. DURALITE II, which excels on machined aluminum parts as well as fragile/delicate parts and castings, offers alternative to plastic media for light deburring and surface conditioning on softer metals. DURALITE II-S includes silicon carbide abrasive for mild cutting action.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Abrasives

Ceramic Flap Discs are designed for heat sensitive materials.

info@productnews.com (ThomasNet News) — Wed, 22 Jul 2009 08:30:32 -0500

Available in regular and extra-large thickness and with 4½, 5 and 7 in. dia, C3 ceramic flap discs provide contaminate-free results for use on stainless steel and can also be used on steel and titanium. They come in 36, 40, 60, and 80 grit sizes and with either 7/8 in. or 5/8-11 arbor holes. Hybrid, 4-degree compressed and compacted flap configuration allows for rough edge applications. Units include premium Z3, Z-THRU®, A3, aluminum cutting, and silicon carbide.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Abrasive Discs | Grinding Discs | Flapdiscs

Surface Conditioning Discs feature quick change connectors.

info@productnews.com (ThomasNet News) — Wed, 15 Jul 2009 08:31:56 -0500

Featuring non-woven construction in coarse, medium, and very-fine aluminum oxide grits, Megabrite(TM) Surface Conditioning Quick Change Discs are designed for general purpose light grinding, blending, cleaning, and finishing applications using portable right angle grinder. They come with standard type R connectors. Available in sizes of 2 and 3 in., discs are suited for use on stainless steel, aluminum, and sheet metal.

This story is related to the following:
Machinery and Machining Tools
Mechanical Components and Assemblies

Search for suppliers of: Abrasive Discs | Grinding Discs | Non-Woven Discs | Polishing Discs

Membrane Removal Head is designed for boiler tubes.

info@productnews.com (ThomasNet News) — Mon, 06 Jul 2009 08:34:12 -0500

Capable of removing membrane and overlay from tube's outer surface, as well as bevel tube simultaneously, Membrane Removal Head is designed to fit 5 different MILLHOG® tools that cover tube range from 7/8-3 in. OD. It features Golf T inserts, which can be installed and removed without wrenches, and eliminate screws and head breakage. Head is available in 2 styles; to remove membrane only or to remove membrane and overlay.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Polishing & Buffing Grinding Heads | Machine Tool Heads

Blast Wheels help reduce cleaning cycle times.

info@productnews.com (ThomasNet News) — Thu, 02 Jul 2009 08:39:00 -0500

Available with unit bearing for belt-driven applications, EZEFIT® wheel contains all features and benefits of direct-drive wheel. It eliminates need for mounting base plate, reduces vibration and wheel assembly time, and offers fail-safe wheel component alignment. Mounting hardware allows for upgrades on most wheel blast machines - Wheelabrator® and non-Wheelabrator - that include Tumble Blast, Spinner Hanger, Monorail, Table, and Railcar Shot Blast systems.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Abrasive Wheels | Blast Cleaning Media | Blast Cleaning Equipment

Brushes offer diamond abrasive floor preparation system.

info@productnews.com (ThomasNet News) — Mon, 22 Jun 2009 08:25:46 -0500

Diamabrush(TM) System is comprised of 4 tools, each designed to be used on standard low pressure commercial cleaning machines for concrete floor polishing, mastic removal, and hardwood prep. A 25 grit spring metal tool prepares concrete floor for epoxy recoating, and 6 tools, from 100-2,00 grit, are used to grind and hone. Other offerings include Diamabrush(TM) Mastic Removal Tool and Diamabrush(TM) Hardwood Prep Tool to remove polyurethane off of hardwood floors.

This story is related to the following:
Cleaning Products and Equipment
Machinery and Machining Tools

Search for suppliers of: Floor Machine Brushes | Concrete Scrubbing Brushes | Abrasive Brushes

End Brushes feature nickel-plated cup.

info@productnews.com (ThomasNet News) — Mon, 22 Jun 2009 08:25:46 -0500

Stem mounted end brush with nickel-plating has high melting point and conforms to military specifications for nuclear applications. It is suited for weld preparation and cleaning, cleaning and finishing recessed areas or ID's, and die, mold and tool cleaning and polishing. Crimped wire (solid end) brushes are available in ½, ¾, and 1 in. dia with trim lengths ranging from 7/8 to 1 1/8 in., while knot wire (hollow end) brushes are available in ¾ and 1 1/8 in. with 7/8 in. trim length.

This story is related to the following:
Machinery and Machining Tools
Portable Tools
Cleaning Products and Equipment

Search for suppliers of: Abrasive Brushes | End Wire Brushes | Industrial Brushes

Ceramic Flap Discs are self sharpening.

info@productnews.com (ThomasNet News) — Mon, 22 Jun 2009 08:25:45 -0500

Available in 4½, 5, and 7 in. dia x 7/8 sizes, Rex-Cut® SIGMA ceramic flap discs feature ceramic abrasive grains bonded to treated material that is layered and stacked to provide aggressive and controlled stock removal with minimal pressure. Offered in 36 and 60 grit versions, with or without hubs, units are suited for use on stainless steel, mild steel, and exotic metals. These are also available with 5/8-11 adapters.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Flapdiscs | Grinding Discs

Blast Wheel is designed for optimal ROI.

info@productnews.com (ThomasNet News) — Mon, 22 Jun 2009 08:25:42 -0500

Used for surface preparation, Genesis blast wheel incorporates features designed to reduce maintenance time and improve efficiency. Front-of-housing access to runnerheads enables full assembly in less than 1 hr, and dual-tapered vanes eliminate shot locking. Along with replaceable housing liners and cast linings made with P-41 metallurgy, wheel includes safety features such as lid with pin-locked safety hinges, integral U-shaped feed spout safety lock, and rapid release vanes.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Abrasive Wheels

Grinding Wheels deliver application versatility.

info@productnews.com (ThomasNet News) — Fri, 19 Jun 2009 08:27:49 -0500

With functionality matched to specific applications, Choice Cuts series is comprised of 4 cutting wheels with selection of abrasive grains and engineered resin bond formulas. Original Slicers are 0.040 in. thick aluminum oxide wheels, and 1/16 in. LongLife Original Slicer versions are also available. Other products include 0.045 in. thick Slicer-Plus and 0.045 in. Super-Slicer. All wheels are available in 4.5 x 7/8 in. and 6 x 7/8 in. dia.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Abrasive Wheels

Lapping Tools suit polymer micro-finishing applications.

info@productnews.com (ThomasNet News) — Thu, 28 May 2009 08:33:27 -0500

Designed to smooth die and mold surface finishes, polymer lapping product line consists of 8 tools and 2 abrasive compounds. Eight polymer tools are made in varying shapes and sizes and are used on air grinding tools, and abrasive compounds are available in 400 and 600 grits and must be used in conjunction with polymer tools. Technology aids efficiency of hand-applied micro-finishing process.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Lapping Abrasives | Lapping Equipment & Supplies | Lapping Tools

Chemical Free Pad can be used dry or with water.

info@productnews.com (ThomasNet News) — Wed, 20 May 2009 09:28:45 -0500

Made from 100% recycled polyester material, Maroon Strip CF Pad suits all kinds of floors and floor finishes including wood floors covered with water-based urethane finishes and stone or terrazzo floors. Measuring 3/8 in. thick, pad follows contours of floor.

This story is related to the following:
Machinery and Machining Tools
Cleaning Products and Equipment
Mechanical Components and Assemblies

Search for suppliers of: Abrasive Pads | Cleaning Pads | Floor Polishing Pads | Polyurethane Pads

Blast Wheels offer simplified assembly and maintenance.

info@productnews.com (ThomasNet News) — Mon, 11 May 2009 08:32:06 -0500

Genesis series includes high-speed, 14-18 in. dia wheels with single- or double-sided runnerheads as well as low-speed, 19.5-26.5 in. dia wheels. Latter exhibits reduced abrasives consumption, better cleaning, and lower horsepower requirements. Features such as front-of-housing access to runnerheads enable full assembly in less than 1 hr, setting pattern length is one-step job, and dual-tapered vanes eliminate shot locking. Multiple safety features are also included.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Abrasive Wheels

Bonded Abrasive Wheels suit cutting/grinding applications.

info@productnews.com (ThomasNet News) — Fri, 01 May 2009 08:27:38 -0500

Working with steel, iron, and other ferrous metals, Vortec Pro(TM) wheels are reinforced with fiberglass webbing for stability and resin-bond-formulated for aggressive stock removal and accelerated cutting. Type 27 grinding and cutting products, offered in 4-7 in. dia, have aluminum oxide grain and are designed for use on right-angle grinders. Available from 2-7 in. dia, Type 1 cutting wheels have same grain, incorporate metal ring around hub, and may be used on wider range of grinders.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Grinding Wheels | Cutting Wheels | Abrasive Wheels | Bonded Abrasives

Flap Discs maximize cooling when grinding SS.

info@productnews.com (ThomasNet News) — Wed, 29 Apr 2009 08:28:55 -0500

PLANTEX® COOL TOP® flap discs feature zirconium abrasive fabric, with top-size coating that optimizes grinding performance, and backing plate made of natural hemp with polypropylene binder. Discs automatically reduce in size during grinding, allowing full use of abrasive fabric. Suited for speeds of 5,000-8,000 rpm and able to run at maximum of 13,300 rpm, they are available in diameters of 4, 4½, 5, and 7 in. and in grits of 40 and 60.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Flapdiscs | Grinding Discs | Abrasive Discs

Superabrasive Honing Tools offer micron-level accuracy.

info@productnews.com (ThomasNet News) — Thu, 02 Apr 2009 08:40:29 -0500

Suited for manufacture of fuel injector bodies, hydraulic valves, gears, and small 2-cycle engines with bore size from 4-65 mm, MMT Metal-Bond Honing Mandrels are precision-machined, with body and feed wedge made from hardened tool steel. Tools produce accuracies of 0.000027 in. for diameter, roundness, straightness, and taper. They are optionally available in 1- to 12-stone versions, designed for use with metal-bond diamond or CBN superabrasives.

This story is related to the following:
Machinery and Machining Tools
Portable Tools

Search for suppliers of: Mandrels | Honing Supplies | Honing Tools | Hones

Abrasive Material can be used in multiple application types.

info@productnews.com (ThomasNet News) — Wed, 18 Feb 2009 08:30:18 -0500

Available in grits from P120-P600, COMPACTGRAIN KK712F coated abrasive accelerates completion of multiple finishing steps using single-layer abrasive. Granulates regenerate, exposing new sharp grains during use, to provide consistent and uniform surface finish throughout entire product life. In addition to flexible cotton backing, suited for mechanical pressure and hand polishing applications, features include cured resin bonded granulate construction that optimizes service life.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Abrasives | Coated Abrasives