ThomasNet Industrial Newsroom -

Hammer Drill/Driver suits space-restricted applications.

info@productnews.com (ThomasNet News) — Thu, 19 Nov 2009 08:33:11 -0500

Cordless SB18 LT measures 8 13/16 in. long and features chuck that can be removed to drive screws with ¼ in. hexagon recessed spindle using accessory bit retainer. Powered by Li-Power Plus 18 V, 2.6 Ah battery, this 5.3 lb tool has aluminum die cast gear housing, Variospeed full-wave electronic speed control, and dual-range torque adjustment. Drilling capacity, with ½ in. chuck, is ½ in. for steel, 1 3/16 in. for wood, and 3/8 in. for concrete.

This story is related to the following:
Machinery and Machining Tools
Portable Tools

Search for suppliers of: Hammer Hand Drills | Cordless Drills

Drills combine benefits of modular and solid carbide tools.

info@productnews.com (ThomasNet News) — Fri, 06 Nov 2009 08:43:06 -0500

Available over standard diameter range of 0.3150-0.8264 in., Victory TOP DRILL M1(TM) Modular Drills come in flanged-shank or round-shank configurations. Units feature solid coupling for consistent performance from insert to insert, and front clamping mechanism to facilitate insert changes. Inserts are offered with UP(M) geometry in grade K20FTiAlN, featuring application-oriented differentiated point design aimed at holemaking in steel and cast-iron components.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Insert Style Drills

Hole Drilling System suits catheter production.

info@productnews.com (ThomasNet News) — Fri, 23 Oct 2009 08:35:44 -0500

Operating on 110 V power and 80 psi compressed air, semi-automatic HPD-6 utilizes Omron PLCs and operator interface panels, Oriental Motors linear actuators, stainless steel cabinet, and precision machined components. Standard configuration allows drilling along 6 in. length of tubing, but is customizable for any length tube. Bench-top unit measures 24 x 24 x 19 in. and is suitable for clean room production environments. Up to 50 unique hole pattern programs can be stored in PLC.

This story is related to the following:
Health, Medical and Dental Supplies and Equipment
Machinery and Machining Tools

Search for suppliers of: Medical Device Machinery | Plastics Drilling Machinery

Lightweight Corded Drill features 3/8 in. keyless chuck.

info@productnews.com (ThomasNet News) — Thu, 08 Oct 2009 08:29:11 -0500

Weighing only 3.4 lb, 1006VSR features 6.3 A motor, variable-speed 2-finger trigger, and provides users with ability to dial-in speed from 0-2,600 rpm. Ergonomically designed soft grip handle provides operator comfort, while recessed lock-on switch ensures safety. Drill comes with belt clip.

This story is related to the following:
Portable Tools
Machinery and Machining Tools

Search for suppliers of: Hand Drills | Masonry Drills | Portable Drills

Slicklines resist corrosion and aggressive environments.

info@productnews.com (ThomasNet News) — Fri, 25 Sep 2009 08:36:20 -0500

Used to lower heavy tools and instruments into oil and gas wells, Bright Surface Slicklines feature smooth surface that minimizes friction, maximizing life expectancy of pulleys, sheaves, and counters. Smooth surface also minimizes microscopic pores, which can lead to pitting, especially on line exposed to aggressive conditions encountered in deepest part of well.

This story is related to the following:
Machinery and Machining Tools
Mining, Oil Drilling & Refining

Search for suppliers of: Well Drilling Cables | Oil & Gas Well Equipment

Automatic Drill is solution for odd-shaped beam drilling.

info@productnews.com (ThomasNet News) — Wed, 23 Sep 2009 08:35:06 -0500

Intended for medium-volume and irregular-shaped beam drilling, Atra Ace lets fabricators drill holes in steel for applications not suited by CNC beam drill line. Operators can bring drill to beam, eliminating material handling efforts, and 2 or more Atra Ace Automatics can be used simultaneously by one operator. There are 5 models, capable of producing holes up to 2 9/16 in. dia and offering cutting depths to 3 in., that integrate variable automatic feed with dual sensing controller.

This story is related to the following:
Portable Tools
Machinery and Machining Tools

Search for suppliers of: Portable Drills | Drills

Hammer Drill/Driver helps minimize operator fatigue.

info@productnews.com (ThomasNet News) — Thu, 17 Sep 2009 08:28:57 -0500

Powered by 18 V, 2.6 Ah Li-Power Extreme battery, Model SB18 LTX weighs 5.5 lb and measures 9 5/16 in. long, with removable ½ in. chuck for use in tight spaces. Dual torque adjustment can be set to 13-31 lb-in. or 31-114 lb-in. In hammer drill mode, tool provides up to 28,000 impacts/min. Hammer drill/driver offers drilling capacity of ½ in. in mild steel and concrete and 2 in. in wood. It has no-load speed of 0-400 rpm in first gear and 0-1,400 rpm in second gear.

This story is related to the following:
Portable Tools
Machinery and Machining Tools

Search for suppliers of: Power Tools | Hammer Hand Drills | Cordless Drills

Radial Arm Drill Press is offered in 7 different sizes.

info@productnews.com (ThomasNet News) — Mon, 20 Jul 2009 08:34:32 -0500

Equipped with front panel programmable logic controls, R Series is available with columns from 9.5-27.5 in. and maximum reach of 40-124 in, and has drilling capacity up to 4 in. It is equipped with 2-20 hp and offers 8-22 rpm with maximum drilling depth of 10-20 in. Series also features hydraulically operated feed and spindle drives, and comes with coolant system, cube table, and halogen work lamp. Model R60 has 2.4 in. drilling capacity with 14 in. column.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Radial Drilling Machinery | Drill Presses

Compact Hammer Drill/Driver is ergonomically designed.

info@productnews.com (ThomasNet News) — Mon, 01 Jun 2009 08:22:47 -0500

Featuring 4-pole frameless motor, M18 Cordless ½ in. hammer drill/driver delivers 550 in.-lb of peak torque with M18 XC high capacity Lithium-Ion battery, and 450 in.-lb of peak torque with M18 compact Lithium-Ion battery. It is suited for HVAC technician for duct fastening; commercial plumber as they run conduit or anchor pipe hangers; and professional electrician for running wire, secure conduit clamps, or drill through metal studs.

This story is related to the following:
Portable Tools
Machinery and Machining Tools

Search for suppliers of: Cordless Tools | Cordless Drills | Cordless Screwdrivers | Hammer Hand Drills

Micro-Size Cordless Tools fit into tight spaces.

info@productnews.com (ThomasNet News) — Thu, 07 May 2009 08:29:29 -0500

Powered by 1.5 Ah HXP Li-Ion batteries that deliver steady stream of power throughout charge, 12 Volt Peak Series includes DS10DFL Driver Drill, WH10DFL Impact Driver, and KC10DFL combo kit. Both tools include variable speed triggers and LED lights under chucks to illuminate work surfaces. Less than 8 in. in length, Model DS10DFL features 3/8 in. keyless chuck and 195 lb-in. turning torque, while Model WH10DFL measures less than 6 in. with ¼ in. hex chuck and 840 lb-in. turning torque.

This story is related to the following:
Machinery and Machining Tools
Portable Tools

Search for suppliers of: Drills | Cordless Tools | Impact Tools

Drills combine benefits of modular and indexable tools.

info@productnews.com (ThomasNet News) — Mon, 30 Mar 2009 08:32:19 -0500

Consisting of steel body coupled to high-strength steel head with 4 coolant holes, KSEM PLUS(TM) Modular Drills are available in standard lengths of 5, 8, and 10 x diameter in inch and metric sizes from 1.250-2.756 in. and 31.75-70.00 mm. Body and head are mated with Flexible Drilling System coupling system, which uses radially activated locking screws for minimal runout. Tools are suited for holemaking in steel, stainless steel, cast iron, and nonferrous alloy workpieces.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Indexable Drills

Solid Carbide Drill works with extra-hard materials.

info@productnews.com (ThomasNet News) — Tue, 17 Mar 2009 08:30:25 -0500

Phoenix drill series includes 3xD and 12xD sizes, available in diameters from 1-12.7 mm in .1 mm increments, with coolant through from 2.5 mm and Helica coating. While specially designed flute and point geometry minimize cutting forces and optimize chip control, ultra-fine grain composition delivers wear resistance and toughness to accommodate higher speeds and feeds. Internal coolant makes tools suited for cutting materials such as steel, stainless steel, cast iron, and titanium.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Solid Carbide Drills

Indexable Drill also performs turning and boring operations.

info@productnews.com (ThomasNet News) — Mon, 16 Mar 2009 08:30:14 -0500

Designed for large diameter hole drilling, WDX Series has nickel-plated steel body that accepts same insert geometry for both outer and inner cutting edges, allowing use of all four of insert's cutting edges. Featuring Super ZX-coated carbide insert grades ACP300 and ACK300, unit machines wide range of steels, stainless steels, cast irons, and exotic materials. Drill is available in coolant through 2XD, 3XD, and 4XD body lengths.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Indexable Drills | Insert Style Drills

Indexable Carbide Insert Drill suit large dia applications.

info@productnews.com (ThomasNet News) — Thu, 12 Mar 2009 08:29:02 -0500

Available in coolant-through 2XD, 3XD, and 4XD body lengths, WDX Series drills holes and can also perform operations such as turning and boring. Nickel-plated steel body accepts same insert geometry for outer and inner cutting edges, and design allows use of all 4 of insert's cutting edges. Featuring Super ZX-coated carbide insert grades ACP300 and ACK300, WDX is capable of machining steels, stainless steels, cast irons, and exotic materials.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Insert Style Drills | Indexable Drills | Carbide Drills

Drill/Drivers deliver 750 lb-in of torque.

info@productnews.com (ThomasNet News) — Tue, 03 Mar 2009 08:29:49 -0500

Powered by Cordless Power Care lithium-ion technology, SFH 18-A CPC Hammer Drill/Driver and SF 18-A CPC Drill/Driver are suited for drilling holes in masonry, stone, wood, and metal with variety of bits, as well as driving screws and lag bolts. Tools feature all-metal gearing and offer speeds up to 2,140 rpm. Ultramide glass-fiber reinforced housing helps protect against drops, while electronic monitoring of battery cells protects against over-heating, overloading, and deep discharge.

This story is related to the following:
Portable Tools
Machinery and Machining Tools

Search for suppliers of: Cordless Drills | Battery Powered Electric Drills | Masonry Drills | Hammer Hand Drills

Carbide Tip Drill accommodates multiple drill tip sizes.

info@productnews.com (ThomasNet News) — Tue, 10 Feb 2009 08:32:34 -0500

Encased in nickel-plated body, SMD 8XD features rigid serration coupling system, to fix replaceable carbide tips to drill face, for accuracy and repeatability. SMDT-MTL drill tip suits steel applications, while SMDT-C has chamfered edge to eliminate break out in cast iron applications, and SMDT-MEL machines super alloys, stainless steels and cast iron. Drill is available in metric and inch diameters ranging from 0.4688-1.2008 in.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Insert Style Drills | Metric Drills | Carbide Tipped Drills

Hammerdrill/Drill/Driver offer three-speed transmission.

info@productnews.com (ThomasNet News) — Mon, 05 Jan 2009 08:38:18 -0500

XRP(TM) line of hammerdrill/drill/drivers include three 18 V models: DCD950KX, DCD950VX, and DCD940KX; three 14.4 V models: DCD930KX, DC930VX, and DCD920KX; and 12 V model DCD910KX. XRP(TM) Lithium Ion 18 V model, DCD970KL features Nano-Phosphate Lithium ion battery. Chucks in hammerdrill self-tighten throughout application to prevent bits from slipping. Drills are designed with all-steel transmission, and have metal gear case allowing transmission to dissipate heat and run cooler.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Drivers | Hammer Hand Drills

Quad-Spindle CNC Turret Unit optimizes productivity.

info@productnews.com (ThomasNet News) — Thu, 20 Nov 2008 07:53:59 -0500

As CNC mechanical feed and inverter speed controlled unit, Selfeeder 4TH5 allows flexible programmable control of spindle rotation rpm and cutting feed. It is designed to be integrated into high-volume production applications and transfer lines to perform such operations as drilling, rigid tapping, facing, and chamfering. Design promotes versatility due to its CNC variable-speed spindles, which allow creation of finished holes at single station.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Self-Feeding Drilling Machinery | Multiple Spindle Drilling Machinery | CNC Drilling Machinery | Turret Type Drilling Machinery

Tools combine drilling and tapping operations.

info@productnews.com (ThomasNet News) — Wed, 29 Oct 2008 07:46:59 -0500

Utilizing 2 servo motors, which are synchronized for through-hole applications, SSM4 and SSM5 Drap Units are capable of high-speed drilling and tapping for class 3 thread production in single pass. Units are available with feed motors ranging from 2.8 lb-ft at 3,000 rpm to 15.85 lb-ft at 2,000 rpm, and spindle motors from 15.86-36.95 lb-ft at 2,000 rpm. Touchscreen control features conversational software that facilitates programming and active diagnostics.

This story is related to the following:
Machinery and Machining Tools
Portable Tools

Search for suppliers of: Drill Units | Tapping Tools

Cryogenic Drill Bits suit maintenance and repair industry.

info@productnews.com (ThomasNet News) — Mon, 22 Sep 2008 07:23:54 -0500

Engineered to drill thought high tensile materials, Cryo-Maxx Drills feature 137° self-centering split point that eliminates need for center punching and also prevents drill from walking or wandering while in operation. Cryogenically treated drill bits provide long life and handle tough maintenance and repair operations.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Maintenance Drills | Drill Bits