ThomasNet Industrial Newsroom -

Cordless Drill/Drivers operate from 14.4 and 18 V batteries.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 04 Sep 2008 07:35:16 -0500

Utilizing Litheon(TM) battery technology, Brute Tough(TM) 18 and 14.4 V cordless drill/drivers and hammer drill/drivers feature 25+1 clutch and tight-gripping Â½ in. metal chuck. Unibody motor construction, all-metal gear train, and DuraShield housing lend to durability, while ergonomics promote grip and minimize fatigue. Offered in same voltages, Compact Tough(TM) cordless drill/drivers offer maneuverable performance via ergonomic design, 20-position clutch, and Â½ in. single sleeve chuck.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Cordless Drills | Hammer Hand Drills

Combihammer features 1,700 W motor.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 07 Aug 2008 07:46:55 -0500

Offering speed of 360 rpm, Hilti TE 80 ATC-AVR enables hammer drilling from Â¾-6 in. dia in concrete, masonry, and natural stone, drilling through-holes with up to 6 in. dia in concrete and masonry, heavy chiseling work, and drilling with high torque in wood and steel. Vibration reduction is provided by mass damper system suspended on springs inside casing, as well as decoupled grip. Device also includes active torque control and built-in theft protection system.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Hammer Rock Drills | Masonry Drills | Hammer Hand Drills | Concrete Drills

Multiple Axis Drill is suited for pipe applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 07 Aug 2008 07:46:45 -0500

Capable of drilling, boring, and tapping pipes of any diameter, Multi-Axial PowerDrill features 5 in. tool diameter and 5 axes of adjustment. Modular design facilitates setup, and optional mounting saddles allow unit to be used on pipes or flat surfaces. Field tool can utilize standard and reversible air motors in 1Â½ and 2Â½ hp sizes and works with range of standard tooling and tool adapters. Optional equipment includes 2-speed gearbox, pivot mount, digital level, and laser pointer.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Pipe Tapping Drills | Drills

Drill Unit allows holemaking in tight installations.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 05 Aug 2008 07:44:49 -0500

Varimec(TM) SSV2 1/8 hp quill-fed drill unit is capable of drilling, counterboring, and burnishing and supports end-milling and facing operations. Servo-controlled Selfeeder features 3.15 in. stroke length, 7.87 ips approach and return speed, and 0.65 ips max cutting speed. Unit is programmed via RS232C port and controller stores up to 99 programs. It measures 12 x 4 x 9 in., and low speed/high-torque and high-speed/low-torque versions are offered.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Drill Units | Self-Feeding Drilling Machinery

Turning/Milling Center offers up to 6,000 rpm speed.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 04 Aug 2008 07:52:07 -0500

Weighing 26,460 lb, Nakamura-Tome WY-250 multi-tasking turning/milling center features upper and lower Y-axis capability for milling or drilling simultaneously on both turrets. It includes 25 and 20 hp (left and right) spindle motors with Super Mill drivetrain milling motors on upper and lower turrets, offering 10 hp 40 Nm. Unit comes with 24 rotating, milling tool stations, 60Â° slant bed, maximum turning diameter of 8.5, and turning length of 23 in.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Turning Machinery | Milling & Centering Machinery | Multi-Axis Machining Centers | Center Drills | Turning Centers

Index-Type Machine performs secondary operations.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Jul 2008 07:29:29 -0500

Used for drilling, reaming, tapping, and threading operations, machine employs geneva motion index table featuring 6, 8, or 12 stations with air, electric, or hydraulic drive. Parts requiring consecutive follow-up operations can readily be tooled to this basic system. Horizontal and vertical drilling and tapping heads are available in sizes from Â½-2 hp, with spindle thrust from 300-2,500 lb. Fully mechanical clamping mechanisms automatically open/close fixtures during table index.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Secondary Operation Machinery | Threading Machinery | Tapping Machinery | Reaming Machinery | Drill Machinery

Metal Plasma Cutting System offers 100% duty cycle at 200 A.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 16 Jul 2008 07:35:55 -0500

With maximum cut capacity of 2Â¾ in. on mild steel, PAK 200 is suited for manual plasma cutting applications like railroad car repair, over road vehicle/tanker repair, tank manufacturing, power plant maintenance, and foundry work. Unit features liquid-cooled torch, dual-gas capability, and tip saver which ensures that accidental contact between tip and work at high power levels won't damage tip. High gouging removal rate allows for removal of up to 25 lb of carbon steel per hr.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Gauging Drills | Metal Slotting Cutters | Plasma Cutters | Manual Tool & Cutter Grinders

Hydraulic Expansion Toolholder features compact design.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 10 Jul 2008 07:28:22 -0500

Optimized to keep interfering contours minimal, TENDO LSS compact hydraulic expansion toolholder can be used to access difficult parts of workpiece in working areas where appliances create difficult conditions. It has runout of less than 0.006 mm at L1, is 200 mm, and features vibration dampening that improves surface quality of workpiece. Available for mounting on shank SK 40, unit comes with balancing quality of G 2.5 at 25,000 rpm.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Milling Machinery | Hydraulic Tool Holders | Hydraulic Drilling Machinery | Reaming Machinery

Self-Feed Bits enable clean hole cutting, even in wet wood.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 10 Jul 2008 07:28:17 -0500

Including 13 bits ranging in size from 1 to 4 5/8 in. dia, self-feed bits are equipped with replaceable coarse threaded tip that draws them into wood without user pressure, eliminating run-out or wobble and pulling through the wood for accurate holes. High-speed 3 5/8 and 4 5/8 in. steel bits feature double chip lifter for optimal removal, while 1 to 2 9/16 in. bits feature 7/16 in. hex shank which allows them to be used in quick change chucks and extension mates.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Boring Bits | Cut-Off Bits | High Speed Steel Bits | Wood Boring Bits | Machine Tool Bits

Cordless Tool Kit includes li-ion hammer drill and saws.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 05 Jun 2008 07:35:51 -0500

Supplied in heavy-duty carrying case, 4-piece 18 V cordless combination kit includes SBZ 18 hammer drill/driver, ASE 18 reciprocating saw, KSAP 18 circular saw, and MLA 18 flashlight. Two 18 V batteries, featuring Li-Power lithium-ion technology, are also included for powering SBZ 18, ASE 18, and KSAP 18 in various construction applications. Air-cooled battery charging system, AC30 Plus, also comes with kit.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Power Tools | Hammer Hand Drills | Reciprocating Sawing Machinery | Circular Saws

Selfeed Bits maintain sharp blade.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 May 2008 07:33:30 -0500

Offering replaceable, precision-ground blade system, SwitchBlade(TM) selfeed bits are used for drilling multiple holes in all types of wood and for routing various types of pipe, vent and gas lines, and bulk wire. Features include investment cast high-alloy steel, aggressive feed screw, and heavy-duty 7/16 in. quick-change hex shank with flat surfaces. Bits are available in multiple sizes ranging from 1 3/8 to 2 9/16 in.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Drill Bits

Compact Rotary Hammer allows access to tight areas.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 May 2008 07:40:36 -0500

Suited for overhead and extended use applications, DH22PG is powered by 5.4 A, 620 W motor and provides mode selector dial to facilitate conversion from rotary hammer to drill-only operation. This 7/8 in. SDS Plus Rotary Hammer can drill small-diameter anchor holes in concrete, drill through wood and metal, as well as fasten with chuck adaptor. Adjustable 360Â° side handle can be removed for working in tight spaces and includes ruled depth gauge for precise depth control.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Rotary Hammers | Hammer Hand Drills

Rotary Hammer offers rotational torque of 796 in.-lb.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 24 Apr 2008 07:36:40 -0500

Suited for drilling large holes, leveling walls, and medium-heavy chiseling, KHE 56 SDS-Max allows users to move between masonry drilling and chiseling operations without switching tools. It offers variable impact energy of 1.0-14.0 J/blow, and features optimum drilling range of 5/8 to 1Â¾ in. using solid bits and 6 in. using core bits. Measuring 18 in. and weighing 17.75 lb, unit comes standard with carrying case, depth gauge, bit grease, and wiping cloth.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Deep Hole Drills | Rotary Drilling Equipment | Hammer Hand Drills | Masonry Drills

CNC Laser Drilling Machine handles 12 in. cube parts.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 Apr 2008 07:51:45 -0500

Designed for high-speed, precision holemaking in tough alloys, Model VLD-300 offers positioning accuracy and repeatability of 0.00004 in. in X, Y, Z axes, 0.004-787 in. cutting feed rate, and 1.5 G acceleration rate. Vertical, Nd:YAG laser drilling machine offers positioning accuracy of Â±6 and Â±4 arc sec and repeatability of Â±3 and Â±2 arc sec for A and C axes, respectively. With cast iron bed and linear motor drives, it also works with CO<sub>2</sub>, diode pump, and fiber lasers.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: CNC Drilling Machinery | Laser Drilling Machinery

Cordless Hammer Drill utilizes 1.5 Ah lithium ion battery.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 Apr 2008 07:36:05 -0500

Featuring non-slip elastomer grip handle and weight of 4.2 lb, 9.37 in. long DV18DCL promotes user comfort while delivering up to 345 lb-in. torque for drilling, driving, and fastening. Tool delivers max impact of 21,000 bpm, and 2-speed transmission enables no-load speeds of 0-400 or 1,500 rpm. In addition to specialized clutch settings for drilling-mode and hammering-mode, 22 other driving stages make this tool suited for high-torque and precision driving application.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Hammer Hand Drills

Heavy-Duty Hammerdrill/Drill/Driver has ergonimic design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 26 Mar 2008 07:45:42 -0500

Engineered with 36V NANO(TM) Phosphate Lithium Ion battery to accommodate up to 2,000 recharges, 36 V DC901KL employs 3-speed transmission that optimizes speed applied to each application. Mode section lets users transition among drilling, screwdriving, and hammerdrilling functions, and all-metal Â½ in. self-tightening chuck continually tightens during operation for optimized bit retention. Weighing 6.75 lb, tool has anti-slip comfort grip for ergonomic handling.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Portable Electric Drills | Cordless Drills | Hammer Hand Drills

Drill Bits are suited for cutting glass and tiles.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 10 Mar 2008 07:35:28 -0500

With 1/8 to 1 in. dia bit size, Glass and Tile Bits are equipped with 3-flat shank to reduce slippage. Tungsten carbide bits are diamond ground to precision point that eliminates walking, and its reinforced head prevents carbide from cracking. Suited for working with glass, ceramic walls, and ceramic floors, they can be used for cutting glass, bathroom installations, drilling, and fastening mirrors or setting screws in glass furniture.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Carbide Drills | Glass Drills

Cordless Hammer Drill delivers up to 26,800 blow/min.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 Feb 2008 08:00:46 -0500

Weighing 4.4 lb, 18 V lithium-ion Model SBZ18 features torque adjusting sleeve with 5 torque settings, forward and reverse acting motor, and all-metal 1/16-Â½ in. keyless chuck. In first gear, drill operates at 0-400 rpm, and in second gear, tool offers speeds from 0-1,450 rpm. Model SBZ18 features drilling capacity of 1 3/16 in. in soft wood, Â½ in. in steel, and 3/8 in. in concrete, with screwdriving capacity up to 5/16 in. in soft wood.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Power Tools | Hammer Hand Drills | Cordless Drills

Micro Driver Drill features 10.8 V lithium ion battery.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 Feb 2008 08:00:44 -0500

Micro driver drill, Model DB10DL, measures less than 6 in. long and weighs 1.8 lb. With 88 lb-in. of turning torque and 21+1 stage clutch, drill can drive 130 three in. screws into wood during single battery charge. Features include battery charger that prevents overheating or power loss, Â¼ in. hex chuck that allows for simple bit replacements, and optimized handle dimensions that create ergonomic grip span for comfortable hand control.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Electric Tools | Drills | Hand Drills | Portable Electric Drills

Wood Boring Bits feature self-feeding design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 13 Feb 2008 07:37:31 -0500

Suited for boring holes in wood for running pipe, tubing, and conduit, Bul-z-Eye(TM) Bits feature aggressive twin-edges with precision-ground teeth. Wobbling is eliminated by precision-machined shaft that achieves perfect bit concentricity, and by burr-free lead screw that feeds bit through wood at consistent rate. Available in 12 bit diameters ranging from 1 to 4 5/8 in., bits are 4 5/8 in. long with 7/16 in. shank to accommodate Â½ in. drill chucks.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Boring Bits