ThomasNet Industrial Newsroom -

Deburring Brushes come with abrasive filled nylon filament.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 08 Aug 2008 07:42:50 -0500

Available in Diamond Abrasive filled nylon filament, Miniature Deburring Brushes are suited for finishing ceramic, glass, aerospace alloys, and tool steel. Brushes for thru holes (81 Series) and bottom end applications are available for holes as small as .024 and 1/8 in., respectively. Twisted-in-wire deburring brushes can be used by hand or rotated under power, and are suited for wide range of applications such as electrical/electronic, medical tubing, and aerospace.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Deburring Brushes

Parallel Kinematic Machine offers 88.9 m/min rapid traverse.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Jul 2008 07:41:19 -0500

Offering 5-axis interpolated machining, Tricept T9000 can perform milling, drilling, routing, deburring and finishing, optical inspection and touch probing, fastener/rivet installation, and friction stir welding. Each strut delivers 990 mm stroke, giving machining reach of metric/inch in both X and Y and metric/inch in Z. Equipped with 6,000 rpm, 50 hp HSK63 spindle, machine delivers Â±0.038 mm positioning accuracy and Â±0.010 mm repeatability.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Multi-Axis Machining Centers | Milling Machinery | Finishing Machinery | Deburring Machinery

Zirconia Flap Wheels suit deburring, finishing applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 24 Jun 2008 07:35:57 -0500

Optimized for sharp cutting action and extended working life, zirconia flap wheels have cotton-backed flaps for flexibility and Â¼ in. shanks to facilitate use. Products come in 1, 1 Â½, 2, and 3 in. diameters with grit sizes of 40, 60, and 80. Offered in quantities of 10, products are recommended for smoothing and deburring steel, stainless steel, non-ferrous metals, and alloys.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Deburring Wheels | Finishing Wheels

Hand Finishing Sticks aid tool, mold, and die maintenance.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 20 Jun 2008 07:38:19 -0500

Cotton Fiber Finishing Sticks, available in round and square geometries, precisely fit into holes and slots for deburring, removing mold lines, finishing, and cleaning machined and cast metal parts. Featuring reinforced non-woven cotton-fiber layers with aluminum oxide or silicon carbide abrasives that are bonded and pressed together, sticks come in Â¼ x 4 in. to Â½ x 6 in. sizes with 24-320 grain as well as soft, medium, and hard bonds.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Deburring Tools | Finishing Tools

Flap Wheels provide aggressive cutting action.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Apr 2008 07:55:18 -0500

Featuring solid hub construction, TigerÂ® and Vortec(TM) Flap Wheels provide chatter-free finishing. Units are suited for variety of applications, from cleaning, edge blending, deburring, and mismatch removal on machined parts, to smoothing metal, plastic, and wood, and final finishes prior to painting and plating. Wheels also provide optimal results when used for blending and finishing on dies, molds, tools, tubing, and channels.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Material Handling and Storage

Search for suppliers of: Finishing Wheels | Deburring Wheels | Cutting Wheels | Flapwheels

Deburring Brushes utilize advanced filament technology.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Apr 2008 08:07:03 -0500

Burr-Rx(TM) disc brushes are made of black nylon filaments co-extruded with high aggression ceramic grains. Constructed with steel shell, they provide dimensional stability, and are produced with 2 in. bore that allows for direct mounting on equipment without need for adapters. Burr-Rx brushes are suited for deburring materials such as inconel, stainless steel, and titanium and are also available in stem-mounted wheel, mini disc brushes, and banded end brush configurations.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Abrasive Brushes | Deburring Brushes

Abrasive Belt Machine grinds in hard-to-reach areas.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 03 Apr 2008 07:36:41 -0500

Running at 25,000 rpm, air-powered Mini-Dynafile II accepts coated and abrasive impregnated non-woven nylon belts measuring 1/8-Â½ in. wide x 12 in. long. Lightweight, composite housing minimizes vibration and is thermal insulated to prevent cold air transmission to operator's hands. Featuring multi-positioning grinding head that pivots 180Â°, tool is suitable for finishing and deburring within narrow openings, as well as blending SS and grinding right angle welds.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Finishing Machinery | Belt Grinders | Abrasive Belt Machinery

Pencil Grinder offers high-speed cutting and deburring.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 17 Mar 2008 07:36:49 -0500

Featuring ergonomic, pencil-type shaft for operator comfort and control, air-powered, 100,000 rpm Pencil Grinder is turbine-driven with rear-exhaust and no wearable gears, vanes, or blades. Tool speed is adjustable with twist of on/off switch. Available with 1/8, 3/32, 1/16, and 3 mm collets, grinder includes stainless steel tool housing, ceramic bearings, and tactile cues on shaft end that alert operator to rotating area.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Deburring Machinery | Pneumatic Grinders | Cutter Grinders

Deburring Machine performs 4 functions in one process.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Feb 2008 07:41:56 -0500

Suited for small to medium-sized workpieces that may be inherently delicate or intricate, CoolPulse 200(TM) electrolytic machine deburrs, polishes, stress relieves, and cleans in one finishing process. Machine can remove rough surfaces from 2.5-5 Âµm Ra and produce smooth surfaces down to 0.1 Âµm Ra, providing bright or mirror-like finish on stainless steel and bright to matte finish on aluminum. Electrolyte used in process consists of chilled, non-fuming, odorless, near-neutral solution.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Polishing Machinery | Deburring Machinery

Deburring System processes parts in wet environment.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 12 Nov 2007 07:49:22 -0500

Wet Tri-Ten Series Series motors and electrical components are outside of process cabinet, isolating them from wet environment. System includes planetary head with 3 brushes, bathed in spray of coolant, that deburr top surface of parts. Also included is magnetized overhead conveyor, second planetary head with brushes bathed in coolant to deburr bottom of parts, and demagnetizer.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Abrasive Belt Tools suit heavy grinding applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 04 Oct 2007 07:58:35 -0500

Utilizing Â½-2 in. wide x 30 in. long belts, air-powered Dynabelter Abrasive Tools are available in .7 hp Standard Duty, 1.2 hp Heavy-Duty, 2.0 hp Extra Heavy-Duty model with pressure bar and top control handle, and 1.2 hp Heavy-Duty model that includes Adjust-A-Wheel, which controls depth of abrasive belt cut. Adjust-A-Wheel allows for controlled grinding on flat surfaces without undercutting. Tools are suitable for weld grinding, blending, deburring, and finishing.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Polishing Machinery | Deburring Machinery | Belt Grinders

Spindle-Finishing Machine suits high-production areas.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 01 Oct 2007 07:47:44 -0500

Requiring 15 ftÂ² of floor space, Model S2-30 finishes up to 480 parts per hour with uniformity, consistency, and process repeatability. Parts measuring up to 2Â½ x 3 in. can be loaded on one or both spindles, manually or with robots, and unloaded after typical 15 sec deburring cycle. Mounted on air-actuated collets or ID expanding collets at ends of rotating spindles, complex parts are pivoted into rotating tub with stream of abrasive slurry moving at speeds to 2,000 fpm.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Material Handling and Storage

Search for suppliers of: Finishing Machinery | Finishing Systems

Deburring Machine features compact form factor.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 06 Sep 2007 07:47:04 -0500

Designed for general manufacturing cells and small or specialty manufacturers, single station Thermal Energy Method(TM) (TEM(TM)) S-250 machine can integrate into lean manufacturing environments. Depending upon component size, compact unit can process million parts or more per yr and can handle small batch or mass production runs with average end-to-end cycle times of 60 sec. It also features computer controls for fine-tuning of process parameters.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Deburring Equipment & Supplies

Custom Wire Brushes suit tube end deburring applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 14 Jun 2007 07:34:28 -0500

Engineered to unique requirements, Crimped Wire Wide Face Brushes are dynamically balanced and available in 4 fill densities. Types include hard drawn steel, high-tensile steel, and Type 302 stainless steel wire, with wire diameters from .006-.020 in. Sectional construction enables choice of face width up to 30 in., available in Â½ in. increments. Applications include surface finishing of clad materials, conveyor and coil strip cleaning, leak detection, and steel roll coating removal.

This story is related to the following:
Cleaning Products and Equipment
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Wire Brushes | Deburring Brushes | Custom Brushes

Grinding Machine accepts variety of contact arms.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 May 2007 07:53:31 -0500

Equipped with 1 hp variable speed motor, Stationary Versatility Grinder utilizes Â¼ x 2 in. wide x 72 in. long abrasive belt that can travel in either forward or reverse motion. Pivot mount assembly allows operator to adjust sanding belt to any angle for optimum comfort, while 4 in. diameter vacuum port enables connection of dust collection systems. Full range of contacts arms is available for grinding, deburring, and polishing applications.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Polishing Machinery | Deburring Machinery | Belt Grinders

Brushes provide in-machine deburring.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 Mar 2007 07:38:52 -0500

Ranging in size from Â¾-4 in. with wire or abrasive nylon filament, Bore-Rx(TM) Brushes remove all burrs found at intersecting holes and other internal edges of workpiece, and can also be used for bore finishing applications. Unlike tube brushes, Bore-Rx brushes rotate in both directions and can operate at high speeds. They can be adapted for use in end mill holders or can be mounted using 3/8 in. collets.

This story is related to the following:
Cleaning Products and Equipment
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Wire Brushes | Nylon Brushes | Deburring Brushes

Metalworking Tools create burr-free contours and parts.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 28 Feb 2007 07:55:52 -0500

Working with punching machine, roller deburring tool and 3-way deburring MultiTool negate need for separate manual deburring stage and displace any burr by chamfering sharp edges (~0.004 in.) on underside of part. Roller deburring tool uses specially formed embossing roll for long edges and contours with radius of 0.8+ in., while deburring MultiTool handles smaller radii, intricate geometries, and corners in single stroke or in nibble mode.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Metalworking Tools | Deburring Machinery

Deburring Station entraps flammable particles in water.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 01 Feb 2007 06:59:33 -0500

Wet Deburring Station helps reduce potential flammability of materials in workplace while grinding. Using wet filtration system, system captures and entraps potentially combustible filings and dust in air/water mixing zone. Hose drain port allows slurry material to be drained with connection of standard garden hose. Weighing 100 lb, 21 x 20 x 36 in. station can be placed on countertop or in cart for station-to-station portability.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

DIN Rail Cutter ensures accurate cuts.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 29 Jan 2007 07:09:09 -0500

Made of hardened steel, ASI DIN rail cutter has 4 separate cutting slots for handling popular DIN rail types. Its 1 m gauge with end stop ensures accurate cut lengths from start to finish. In addition to lever action that minimizes required operator force, cutter features bench-top design for location placement flexibility. Burrs and sharp edges are eliminated due to clean cut die design, which also eliminates need for secondary filing or grinding.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Deburring Cutters | Special Cutting Tools

Deburring Center utilizes planetary deburring head.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Jan 2007 07:47:46 -0500

Employing three 10 in. brushes per head, Tri-Ten Series is capable of deburring both sides of flat part in one pass, without flipping it, via use of dual magnetic conveyors. Third conveyor passes parts into degausser for demagnetization. Base system design can be expanded to include application-specific auxiliary equipment. For non-ferrous parts, systems can be designed using alternate part fixturing methods.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence