ThomasNet Industrial Newsroom -

Combination Laser-Punch System can punch, form, tap and cut.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 24 Nov 2008 07:45:38 -0600

Combining 20 ton programmable hydraulic press drive and Fanuc fast axial flow CO<sub>2</sub> laser technology, STRIPPIT LP-1225 laser punch has capacity to process 49.21 x 98.4 in. maximum sheet size with 0.250 in. maximum material thickness. System features low noise/scratch sensitive brush bed system to process lighter gauge components, and can be integrated with pick-sort robotic material and part handling system.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Tapping Machinery | Laser Cutting & Punching Machinery | Punch Presses

Machining Center uses 30-taper spindle tooling.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 19 Nov 2008 07:42:52 -0600

Optimized for rigidity and accuracy, TC-S2D machining center comes in 3 models with 300 kg max table load and 300, 500 or 700 mm X-axis; 360-400 mm Y-axis; and 300 mm Z-axis travels. Servo-driven tool turret, together with spindle acceleration/deceleration rates, allows one tool rotating at 10,000 rpm to be replaced in 1.6 sec with adjacent tool accelerated to same speed. Furthest tool in turret, necessitating 180° indexing, is exchanged in 2.4 sec.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Multi-Axis Machining Centers | High Speed Cutting Machining Centers | CNC Machining Centers | 5 Axis Machining Centers

Double Blade Mitre Saw accommodates larger moldings.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 07 Nov 2008 07:43:17 -0600

Able to work with all types of wood and aluminum covered material, Brevetti PRISMA MAXI provides low- to medium-volume frame shops with flexibility to accommodate moldings up to 7 x 3.25 in. Horizontal cutting stroke and other design features reduce blade vibration for smooth, consistent miter and precise cut. Rated at 200 cuts/hr, fully enclosed solution employs two 1½ hp, single-phase, 3,200 rpm motors and comes standard with 80-tooth, 275 mm saw blades featuring 32 mm bore.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Mitering Band Saws

Waterjet incorporates features for precision operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 30 Oct 2008 07:37:54 -0600

Along with base design featuring 22 in. I-beam construction, Mitsubishi Waterjet has stainless steel work tank completely isolated from machine frame, pump control incorporated into NC cabinet, and crash protection for X/Y/Z axes. Mitsubishi 700 Series CNC control, operated via 15 in. waterproof screen, delivers programming abilities for precision machining. Other features include auto grease system for ball screw lubrication and Intelligent Taper Control with 76 mm focus tube length.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Waterjet Cutting Systems | Waterjet Cutting Machinery

Depaneling Saw facilitates singulating assembled PCBs.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 27 Oct 2008 07:36:29 -0600

Featuring 2.95 in. dia and .021 in. thick diamond coated cutting blade, PLC controlled model S300 can singulate up to 24 lines in one pass. It includes STI safety sensors built into lid, and ceases operation automatically if lid is opened during process. Built in dust extraction vacuum and external dust extraction line aid dust removal during process and board clean up after singulation process is finished. Unit can also singulate PCBs with overhanging components on parting line.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Diamond Sawing Machinery | Printed Circuit Board (PCB) Depaneling Machinery

Scissor-Type Saw swivels 60° left or right for miter cutting.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 21 Oct 2008 07:42:11 -0600

In addition to 2-piece cast iron saw head that can swivel 60° right and left, Model SM-15D features 3 hp band drive motor with infinitely adjustable VFD band speed control (50-400 fpm). Band wheel, mounted directly to output shaft of heavy-duty worm gearbox, provides torque necessary to cut tough materials, and console mounted on articulating arm lets operator control band speed, feed rate, and other functions. Saw can cut 11 in. rounds and 15 x 10 in. rectangles at 90°.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Band Saws | Mitering Band Saws

Laser Cutting System processes 4 x 2 m sheet sizes.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 16 Oct 2008 07:54:21 -0600

Incorporating linear drive technology, Axel 4020 features high-pressure cutting head that can hold 5, 7.5, or 10 in. cutting lens, and includes safety system that protects it from collision with workpiece. Machine is capable of processing thin material at speeds up to 1,574 in./min and thick material up to 1 in. mild steel. Providing accurate reproduction of programmed contours, integrated 32-bit control includes mathematical capabilities as well as extensive material library.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Cutting Lasers

Semi-Automatic Band Saw is designed for production work.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 15 Oct 2008 07:29:19 -0600

Featuring single-button operation, Model KS450 is designed for production work requiring sawing of solids and structural shapes up to 14 in. at 90° in full cycle, semi-automatic operation as well as double mitering (60° to left/right) with variable-speed blade from 60-360 fpm. Saw frame is canted 5° to facilitate cut through bottom of structural section without vibration or slowdown. Other features include fully hydraulic operation and free-standing operator console.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Sawing Machinery | Mitering Band Saws | Band Saws

Tube Cutting Machine handles multi-purpose applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 14 Oct 2008 07:43:59 -0600

Model 618 Automatic Cutter offers cylindrical, standard square, and thin square cuts in widths from 0.010-18 in, suiting tube cutting applications for seals, rings, and gaskets. Featuring digital touch screen controls and digital operating components, it also has mandrel with adjustable length from 18-1 in. and stock from 6 in. OD to minimum extrudable size that will fit mandrel and Rheostat-controlled mandrel speed from 0-2,700 rpm.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Tubing Cutters | Tubing Cut-Off Machinery | Automated Machinery

Heavy-Duty Demolition Saw produces minimal vibration.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 10 Oct 2008 07:39:21 -0600

Along with 15 A motor, RS35 heavy-duty reciprocating saw features adjustable aggressive orbital action, variable speed control, and Constant Response(TM) circuitry that maintains consistent, controlled power. Anti-Vibration system, with shock absorbing handle and counterbalance mechanism, is custom-engineered to isolate user from tool vibration while also promoting all-day comfort and control. Also included, LockJaw(TM) blade holder enables one-handed blade changes.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Saws

CNC Machines cut EPS, XPS, and EPP foam blocks.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 22 Sep 2008 07:23:42 -0600

Designed for continuous operations, FCH Series includes 4 x 4 x 8 and 8 x 4 x 8 CNC 4-axis machines supplied with computer, flat screen monitor, and software pre-installed. Accuracy is 0.01 in. with 200 ft cutting wire and 26-30 ipm cutting speed. Capable of tapered cuts, machines are provided with over 200 shapes ready-to-cut in PDF format.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Foam Cutters | Foam Cutting Machinery | CNC Machinery

Sliding Compound Miter Saws measure 8½ in.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 16 Sep 2008 07:45:37 -0600

Powered by 9.5 A motors and featuring no-load speed of 5,500 rpm, Models C8FSE and C8FSHE slide compound miter saws weigh 31 and 32 lb, respectively. With bevel range of 48° to left and 5° to right for precise compound cuts, they feature thumb-actuated positive stops to adjust miter angles of 15, 22.5, 31.6, and 45° to both left and right. Portable units can handle materials up to 2 9/16 in. high, such as crown molding lying flat and 12 in. deep in 90° cross cut.

This story is related to the following:
Portable Tools
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Wood Saws | Woodworking Table Saws | Electric, Portable Hand Saws

Pulse Cutting Bandsaws promote workplace efficiency.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 11 Sep 2008 07:34:11 -0600

Single pulse cutting machines PCASW430AX and PCSAW530AX are designed to minimize problems such as noise, vibration, and cutting resistance for optimal efficiency in metal bandsawing. While PCASW430AX and PCSAW530AX, respectively, cut material sizes up to 16 and 21 in., both machines are optimized for reductions in cutting noise, kerf loss, and material waste to promote safe and efficient working environment.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Metal Cutting Bandsaw Machinery

Pneumatic Hacksaw cuts pipe and structural steel up to 24 in.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Sep 2008 12:16:33 -0600

With blade stroke of 2 3/8 in., Model 5 1212 0050 will cut 24 in. dia pipe at 90° in one pass. Unit features 1.5 hp air motor that uses 51 cfm air volume at 90 psi air pressure. Certified to ATEX regulations EX 112 GcT5, saw can operate in hazardous atmospheres and environments classified as EX Zone 2. Portable tool uses range of heavy-duty blades from 8-37 in. long, which are available in HSS (M2) and HSS-SL with Molybdenum for cutting carbon steel, SS, and hard alloys.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Pneumatic Saws | Pipe & Tube Saws | Bi-Metal Hack Saws | Pneumatic Saws | Pipe & Tube Saws | Bi-Metal Hack Saws | Pneumatic Saws | Pipe & Tube Saws | Bi-Metal Hack Saws

High-Thrust Groover suits rolling or cutting operations.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Sep 2008 12:16:30 -0600

With capacity of ¾ in. dia x .120 in. wall, 24014 High Pressure/High Thrust Groover operates by advancing and closing spinning head containing rolling or cutting tools over clamped tube. Depth of rolled or machine cut grooves can be changed, and design facilitates access to tooling as well as tool changes. In addition to 5 sec cycle time, machine features jaw opening of 1¼ in. and clamp force of 3 tons. It comes with 7½ hp spindle motor and variable speed control.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Cutting Machinery | Grooving Machinery | Pipe Groovers | Cutting Machinery | Grooving Machinery | Pipe Groovers | Cutting Machinery | Grooving Machinery | Pipe Groovers

Reciprocating Saw is cordless.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Sep 2008 07:41:39 -0600

Suited for cutting pipe, strut, threaded rod, steel studs, and other miscellaneous steel, Hilti WSR 36-A can also be used for cutting wood with nails, wood beams, treated lumber, plywood, wood composites, or plastics. With 36 V 3.3 Ah CPC Li-Ion battery, it features Active Vibration Reduction technology that reduces vibration by up to two-thirds. Including ergonomic operating controls and comfortable handling, it maintains control when cutting overhead and in difficult to reach areas.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Wood Cut-Off Saws | Metal Cutting Saws | Reciprocating Sawing Machinery | Hand Saws | Cordless Tools

Electric Diamond Cutters feature 2.6 kW motor.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 04 Aug 2008 07:52:09 -0600

Designed for reinforced concrete, granite curbstone, slabs, bricks, metal beams, and steel pipes, Models DCH 230 and DCH 300 Electric Diamond Cutters have cutting depth adjustment mechanism to reach depths of 3.4 and 4.7 in. Hilti Smart Power electronic control system constantly regulates motor power to suit material being cut and pressure applied to tool. Employing ergonomic in-line design with grip and cutting blades in exactly same axis, units allow precise guidance with less pressure.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Cutters | Metal Cutting-Off Machinery | Diamond Tooling | Steel Cutters | Grinding Tools

Cutter is suited for hard, soft, and fibrous materials.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 04 Aug 2008 07:52:02 -0600

Employed for coarse grinding of materials into particles of uniform sizes ranging from granules down to 20-30 mesh, Model SCC-15 Screen Classifying Cutter has 15 in. throat width and can be fitted with 30 parallelograms with 60 cutter inserts. Bed screen perforations range from 1/32 to 1½ in. in dia and up to 3 in. square, according to material characteristics and desired particle size. Shaft rotates at 30-3,600 rpm producing up to 500 cu ft/hr of sized product, depending on application.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Rotary Cutters | Plastics Size Reduction Grinders | Cutting Machinery | Cutter Grinders | Shear Cutters

Diamond Saw cuts through quartz and glass.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 31 Jul 2008 07:42:12 -0600

Designed to use 1 in. wide grit-edged saw bands, Model 2012-D12 features 20 in. throat with standard 12 in. work height that accommodates wide range of material sizes. It includes 20 in. wheels to minimize band fatigue, electric ballscrew-controlled cast iron table with 12 in. stroke, and variable frequency 5 hp ac drive with band speeds from 550-5,500 fpm. Device includes feed-rate control from operator panel, as well as easily accessible coolant reservoir and pump system.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Band Saws | Diamond Sawing Machinery

Semi-Automatic Cold Saw meets demands of production sawing.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Jul 2008 07:44:53 -0600

Along with vertical column design for vibration-free sawing, Model C360SA features 14 ½ in. HSS blade; 4 hp, 3-phase TEFC motor; 2-speed spindle, 18 and 36 rpm; totally enclosed transmission; 24 V controls; and built-in flood coolant. Controls facilitate setup and operation, while full guards are removable for cleaning. Cutting capabilities include round and square profiles or solid mild steel as well as rectangular shapes of various sizes.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Metal Cutting Saws | Cold Saws | Automatic Saws