ThomasNet Industrial Newsroom -

CNC handles variety of metal cutting needs.

info@productnews.com (ThomasNet News) — Wed, 05 Aug 2009 08:28:20 -0500

EDGE Pro supports both oxyfuel and conventional plasma cutting systems. It comes pre-installed with Phoenix® software, including CutPro(TM) Wizard to simplify learning and operation of entire cutting system. Unit includes both analog and SERCOS motion control connectivity, touch screen display, and integrated operator's console and it is suitable for wide range of applications-from basic cutting jobs to most complex.

This story is related to the following:
Machinery and Machining Tools
Controls and Controllers

Search for suppliers of: Metal Cutting Tools | Computer Numerical Controls (CNC) | Plasma Arc Cutting Machinery

Machine peforms all structural fabrication functions.

info@productnews.com (ThomasNet News) — Thu, 21 May 2009 08:28:55 -0500

Employing plasma cutting and precise positioning technologies, Ring of Fire Thermal Processor can process all AISC structural shapes including beams, columns, angle iron, channel iron, HSS square and rectangular tubes, as well as plate and flat stock. System features self-contained dust collection and filtration system, and utilizes no oils or coolants. Capabilities include bolt hole generation, cut-off, surface bevels, weld prep, coping, and electronic marking.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Plasma Cutting Machinery | Cut Off Machinery | Coping Machinery | Structural Fabrication Machinery | Fabrication Machinery

Cutting Machine offers working lengths up to 100 ft.

info@productnews.com (ThomasNet News) — Mon, 11 May 2009 08:31:57 -0500

Designed to carry plasma and oxy-fuel cutting stations, Sabre DX Heavy-Duty Gantry Cutting Machine features m3 Precision Plasmarc(TM) system, which allows it to cut and mark with same plasma torch. Available in 200, 360, 450, or 600 A configurations, m3 system provides precision cutting and marking on materials up to 1.5 in. thick and sever capabilities on materials up to 6 in. thick. Sabre DX, supplied in widths from 6-15 ft, reaches speeds up to 1,400 ipm and includes Windows®-based Vision CNC.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Plasma Cutting Equipment | Plasma Cutting Machinery | CNC Machinery

Plasma Cutting Machine Retrofit Kit targets HVAC shops.

info@productnews.com (ThomasNet News) — Wed, 22 Apr 2009 08:31:38 -0500

Available for Cybermation and Lockformer plasma cutting machines, Retrofit Kit includes everything necessary to replace old electronics with new motors and controls. Hypertherm Automation Edge Ti controller features 15 in. color touchscreen with single station operator's console and built-in servo amplifiers. Also included, MTC software's Design2Fab and Turbo Nest programs provide necessary tools to create complete duct-fitting layouts while minimizing scrap.

This story is related to the following:
Machinery and Machining Tools
Controls and Controllers
Software

Search for suppliers of: Plasma Cutting Equipment | Plasma Cutting Machinery | Numerical Control (NC) Software | Human Machine Interface (HMI) Software

Plasma Cutting Machine is built for speed and precision.

info@productnews.com (ThomasNet News) — Fri, 17 Apr 2009 08:38:13 -0500

Acer DX employs m3 precision plasma system (200/360 A), which allows cutting and marking via same plasma torch. Capable of producing precision cuts and marks on materials up to 1.25 in. thick, m3 system also features gas control system that is fully automated by Vision 51 CNC. Machine, available with 5 x 10 or 6 x 12 ft working area, operates at speeds to 1,400 ipm and employs 3-axis precision gantry with rack-and-pinion drives.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Plasma Cutting Equipment | Plasma Cutting Machinery

Plasma Cutter packs 5/8 in. cut rating into 21lb package.

info@productnews.com (ThomasNet News) — Thu, 12 Mar 2009 08:29:04 -0500

Spectrum 625 X-TREME 40 A plasma cutter measures 9 x 5.5 x 13.25 in., runs on 240 V input power, and cuts 5/8 mild steel at 12 ipm and ¼ in. steel at 60 ipm. Auto-Refire(TM) technology eliminates retriggering of torch when cutting fences or other expanded metal material, while electronically controlled air system automatically adjusts torch air pressure. X-CASE(TM) provides protection during transport and storage, and fits plasma unit, consumable box, eye protection, gloves and other accessories.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Plasma Cutters | Plasma Cutting Equipment

Portable Plasma Cutter can cut 7/8 in. mild steel at 10 ipm.

info@productnews.com (ThomasNet News) — Fri, 06 Mar 2009 08:29:33 -0500

Weighing only 52 lb, 60 A plasma cutter Spectrum® 875 measures 13.75 x 8.5 x 18 in., runs on 208/230 V single-phase power, and operates at full output when powered on 12,000 W generator. It features Auto-Refire(TM) technology, which eliminates retriggering when cutting fences, grates, and other expanded metal material, while Line Voltage Compensation provides steady cutting arc even when input power varies by ±10%. Unit suits construction, maintenance, and fabrication applications.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Plasma Cutters | Plasma Cutting Equipment

Torch Height Controller connects to CNC and plasma systems.

info@productnews.com (ThomasNet News) — Wed, 04 Mar 2009 08:32:10 -0500

Equipped with high-contrast display, Model SC-3000 indicates torch height in distance and voltage. Built-in collision sensor retracts automatically, eliminating need for external sensor. With arc voltage range of 0-300 V, unit is ready for all applications from marking to cutting thick materials. To facilitate operation, operating parameters are limited to 2 drop-down menus on user interface.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Plasma Cutting Equipment

Cutting Torch is offered in 90 degree model.

info@productnews.com (ThomasNet News) — Mon, 09 Feb 2009 08:30:32 -0500

Available in 20 and 50 ft lengths, manual 1Torch utilizes 30 consumables that cover spectrum of manual plasma cutting/gouging in 20-120 A range. Features include O2-B and ATC connections and lead extensions that allow cutting at distances up to 100 ft from power supply. Designed as replacement torch, unit can be installed on most plasma systems, when combined with adapter.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Plasma Cutting Torches

Etch System for advanced memory interconnects.

info@productnews.com (ThomasNet News) — Wed, 03 Sep 2008 07:35:17 -0500

Optimized for throughput and MTBC ratings, Applied Producer® Etch system performs interconnect dielectric etch steps needed for production of Flash and DRAM memory chips. Reactor design promotes high-throughput, high-yield dielectric etch in DRAM and NAND Flash interconnect structures from 8X-4X nm technology nodes. System is suited for chip manufacturing applications such as low k deposition, strain engineering, litho-enabling films, thermal films, and high-temperature PECVD.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Etching Machinery | Plasma Etch Control Systems

Plasma Cutting System has recommended cut capacity of 1/2 in.

info@productnews.com (ThomasNet News) — Mon, 18 Aug 2008 07:38:22 -0500

Equipped with built-in CNC interface and 50:1 voltage divider, single-gas Powermax45® is suited for mechanized cutting of duct work and other materials up to 3/8 in. Portable system features 45 A output current, 50% duty cycle, and quick disconnect torch that facilitates transitions between handheld and mechanized applications. Unlike oxyfuel systems, Powermax45 requires no pre-heating of work piece and no regulating of flammable gases.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Plasma Cutting Equipment

Metal Plasma Cutting System offers 100% duty cycle at 200 A.

info@productnews.com (ThomasNet News) — Wed, 16 Jul 2008 07:35:55 -0500

With maximum cut capacity of 2¾ in. on mild steel, PAK 200 is suited for manual plasma cutting applications like railroad car repair, over road vehicle/tanker repair, tank manufacturing, power plant maintenance, and foundry work. Unit features liquid-cooled torch, dual-gas capability, and tip saver which ensures that accidental contact between tip and work at high power levels won't damage tip. High gouging removal rate allows for removal of up to 25 lb of carbon steel per hr.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Gauging Drills | Metal Slotting Cutters | Plasma Cutters | Manual Tool & Cutter Grinders

Manual Plasma Cutters fuse peformance and portability.

info@productnews.com (ThomasNet News) — Tue, 01 Jul 2008 07:38:26 -0500

Built to withstand harsh environments, PowerCut(TM) 1600 and 1300 has external housing resistant to damage, corrosion, and weather. Features include digital readout display, tool-less quick disconnect torch, and automatic mode selection function. Blow back technology, also included, eliminates high-frequency startups that can cause electronic disruptions. Respectively, cutting and severing capacities are 1¼ and 1½ in. for PowerCut 1300 and 1½ in. and 1¾ in. for PowerCut 1600.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Plasma Cutting Equipment

Plasma Cutting System weighs 29 lb.

info@productnews.com (ThomasNet News) — Wed, 18 Jun 2008 08:00:57 -0500

Featuring built-in air compressor, Model AirCut 15C manual plasma cutting system offers 1/8 in. standard and 3/16 in. maximum cut capacity at 29 lb. Suited for HVACR professionals, portable, self-contained unit fits into 120 V, 15 A plug.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Plasma Cutters

Abatement System features microwave plasma and wet scrubber.

info@productnews.com (ThomasNet News) — Tue, 17 Jun 2008 07:37:34 -0500

Addressing gas abatement challenges arising from dielectric and polysilicon etch processes used in semiconductor manufacturing, Sirius(TM) 6000 system reduces fab greenhouse gas emissions by 95% over wide range of total flow rates and perfluorocompound (PFC) concentrations. High-density plasma delivers more energy to abatement process, reduces PFC gases to hydrogen fluoride (HF), and prevents creation of harmful by-products, such as carbon tetrafluoride (CF4).

This story is related to the following:
Machinery and Machining Tools
Cleaning Products and Equipment

Search for suppliers of: Plasma Etching Systems | Plasma Etch Control Systems

Plasma Cutting Machines combine portability and power.

info@productnews.com (ThomasNet News) — Tue, 17 Jun 2008 07:35:25 -0500

Respectively delivering maximum cuts of 1¾ and 2 in., CUTMASTER® 102 and 152 can operate all day at recommended cut capacity and feature True Tip(TM) 60 A drag cutting tip. Both plasma cutters provide portable gouging and cutting capabilities for heavy fabrication/manufacturing and incorporate features such as flexible 1Torch and True Guard(TM) roll bar. Also included, front panel LEDs promote operator confidence and error-free use.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Plasma Cutting Machinery

Plasma Cutting System is suited for mild steel market.

info@productnews.com (ThomasNet News) — Fri, 06 Jun 2008 07:28:23 -0500

Capable of cutting 1 to 1½ in. thick steel at 100% duty cycle, Ultra-Cut 200 features WMS (Water Mist Secondary) for operation on non-ferrous materials. It has keyless consumable cartridge design, which allows user to quickly move from ferrous and non-ferrous materials and different thicknesses. SpeedLok(TM) torch head accurately aligns consumable parts with one twist, while coolant tube check valve prevents coolant leakage as consumables are replaced.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Steel Cutters | Plasma Cutting Equipment

Plasma Cutting System features heavy-duty welded steel frame.

info@productnews.com (ThomasNet News) — Wed, 07 May 2008 07:37:15 -0500

Featuring uniframe design, tru-kut heavy-duty 5 x 10 ft system offers single set-up machining of frame and mounting surfaces. It utilizes Edge Ti CNC which includes touchscreen graphics display, on-board true shape nesting, and remote diagnostics/help capability. Air down draft cutting table includes 3 clean out doors on each side and parts catcher collects smaller parts falling through cutting slats. It also has digitally controlled brushless servo motors and high-precision motion system.

This story is related to the following:
Machinery and Machining Tools

Plasma Torches handle light- to heavy-duty cutting.

info@productnews.com (ThomasNet News) — Fri, 29 Feb 2008 07:49:09 -0500

Radnor® MC60 MasterCut(TM) plasma cutting torch operates at 20-60 A and features ergonomic torch handles for operator comfort. Operating at 30-120 A, MC100 is available as hand torch or straight-line machine torch. All work with ATC Receptacle Adapters and ATC Lead Extensions that comply with ATC Torch Adapter Kits for various power supplies. Range of consumables and accessories work with draft tip/cutting, standoff cutting, and gouging modes of operation.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Plasma Cutting Torches

Consumable Kit facilitates 4 types of plasma cutting.

info@productnews.com (ThomasNet News) — Mon, 31 Dec 2007 06:41:27 -0500

Intended for owners of Powermax1000®, 1250, or 1650 plasma systems, Consumable Kit includes shielded consumables for everyday drag cutting that involves following line or template. It also comes with unshielded consumables for cutting in tight places, gouging consumables for tough metal removal jobs, and FineCut consumables for precise cuts on thinner plate. Reference guide explains how to get best cut quality and consumable life when cutting with handheld torch.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Plasma Cutting Equipment | Plasma Consumables