ThomasNet Industrial Newsroom -

Chain Saw features diamond chain for optimized cutting.

info@productnews.com (ThomasNet News) — Wed, 27 May 2009 08:37:42 -0500

Model CS 536163-2 pneumatic concrete chain saw features AirFORCE F4(TM) Diamond Chain that cuts up to 15 in. deep in concrete and includes chain-based water distribution system for lubrication between bar and chain. Air saw plunge cuts mechanical openings, irregular shapes, and square corners up to 14" in. with no overcuts. Featuring 6.5 hp motor with no load speed of 5,700 rpm, unit operates at 124 cfm air volume at 90 psi, with noise level of 88 dB at 3 ft.

This story is related to the following:
Machinery and Machining Tools
Portable Tools

Search for suppliers of: Concrete Cutting Saws | Portable, Air Powered Chain Saws

Pavement Saw suits high-production cutting applications.

info@productnews.com (ThomasNet News) — Mon, 22 May 2006 08:03:05 -0500

Powered by 60 hp Deutz diesel engine, CS-7060 walk-behind saw has 36 in. blade capacity and max cutting depth of 15 in. Handles remain level regardless of saw's operating position and are coupled with unit's moving center of gravity for optimal balance in all cutting applications. Clutchless bladeshaft disengaging system can stop and start bladeshaft rotation while engine is running. Unit weighs 1,725 lb and is suited for professional cutters engaged in road work and repair.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Concrete Cutting Saws

Pavement Saw offers maximum blade capacity of 36 in.

info@productnews.com (ThomasNet News) — Thu, 05 Jan 2006 07:06:37 -0500

Driven by 60 hp Deutz diesel engine, walk-behind Series PS is 34 in. wide without outer blade flanges attached. Stay Level Handles are adjustable and remain level regardless of saw's operating position, minimizing operator fatigue and risk of back injury. Clutchless bladeshaft disengaging system enables bladeshaft rotation to be stopped or started while engine is running. Saw also includes automatic parking brakes and vibration control mounting system.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Concrete Cutting Saws

Rideable Saw minimizes operator fatigue.

info@productnews.com (ThomasNet News) — Fri, 10 Dec 2004 07:52:39 -0500

Utilizing Cummins 85 hp turbocharged diesel engine, Model RS 8500 delivers travel speeds up to 4 mph with zero turn radius for accurate alignment and cutting. It features 26 in. blade and inline right angle gearbox that uses 14 belts. Upcutting blade rotation lifts slurry from cut. Sealed bladeshaft assembly operates 250+ hours before needing to be greased. Single-handle control facilitates forward and reverse travel, as well as blade raising and lowering.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Asphalt Cutting Saws

Rideable Saw suits accelerated production schedules.

info@productnews.com (ThomasNet News) — Wed, 08 Sep 2004 07:48:01 -0500

Equipped with Cummins 85 hp turbocharged diesel engine and 26 in. blade, RS 8500 has inline right angle gearbox configuration that uses 14 belts to transfer power to drive bladeshaft. Protective sealed bladeshaft assembly operates 250+ hr before requiring grease, and unit suits partial- to full-depth cutting jobs. Riding saw has 4 mph max travel speed, zero-turn radius, and single-handle control for forward/reverse travel and blade raising/lowering.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Concrete Cutting Saws

Walk-Behind Saw cuts concrete and asphalt up to 7 in. deep.

info@productnews.com (ThomasNet News) — Tue, 13 Apr 2004 07:39:25 -0500

Portable, pneumatic Model CSR 150 features 9.5 hp air motor with gearbox that reduces turning speed from 5,250 to 2,900 rpm to regulate blade speed and increase torque to cut hard materials. Crank handle raises and lowers blade for cutting depths up to 7 in. Saw features 1 in. arbor, blade capacity up to 20 in. diameter, solid rubber casters, pointer to follow scribe line, and ¾ in. water connection port for wet cutting applications.

This story is related to the following:
Machinery and Machining Tools
Portable Tools

Search for suppliers of: Asphalt Cutting Saws | Concrete Cutting Machinery | Masonry Saws | Pneumatic Saws

Crack Chasing Saw routs cracks and joints at 6 to 8 ft/min.

info@productnews.com (ThomasNet News) — Wed, 19 Jun 2002 08:58:19 -0500

Sawtec® CC-100 Crack Chaser walk-behind crack chasing saw cuts concrete or asphalt to 1 in. depth. Highly maneuverable unit cuts up to 3,000 linear ft/day, depending on material being cut, and features swivel caster and retractable control handle. Available in gasoline and electric models, it uses 6 in. dia dry diamond blade in 0.250, 0.375, or 0.500 in. widths, and operates virtually dust-free when connected to Sawtec Maxi-Vac dust collector.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Concrete Cutting Saws

Saw routs out cracks to depth of 1 1/4 in.

info@productnews.com (ThomasNet News) — Tue, 12 Feb 2002 07:54:49 -0500

Sawtec(R) Crac-Vac crack chasing saw operates virtually dust free when routing out cracks and joints in preparation for application of repair compounds. Vacuum housing with internal impeller fan routes dust to reusable dust collection bag. When mounted on dolly, saw can be used for straight-line joint cleanout work, or for cutting artificial grout lines for decorative concrete applications.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Concrete Cutting Saws

Cleanout Saws help repair cracked floors.

info@productnews.com (ThomasNet News) — Thu, 17 Jan 2002 11:58:55 -0500

Crack chasing and joint cleanout saws rout out random cracks and joints prior to use of repair compound. All concrete cuts can be made with either hand held or walk-behind saws. Crac-Vac routs out random cracks to depth of 1-1/4 in., and can be used for straight-line joint cleanout work. Cutting to 1-1/2 in., walk-behind CC-100 crack chaser cuts up to 8 ft of crack/min. Cut-Vac cuts to 2-1/2 in. JS-90 and JS-110 clean joints at 20 to 60 ft/min.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Concrete Cutting Saws

Joint Cleanout Saws have dust free operation.

info@productnews.com (ThomasNet News) — Thu, 17 Jan 2002 11:58:55 -0500

JS-90 and JS-110 walk-behind cutting saws have upcut rotation, which enables dust extraction and allows quick connection to dust collection system. Using dry diamond blades, both saws cut to maximum depth of 3 in. and clean joints at rate of 20 to 60 ft/min. Saws allow for simultaneous use of 2 blades for spalled joint repairs. JS-90 has 9-hp Honda gas engine, and weighs 160 lbs; JS-110 weighs 180 lbs, and has 11-hp engine.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Concrete Cutting Saws