ThomasNet Industrial Newsroom -

Abrasive Saw utilizes 30-36 in. abrasive wheel.

info@productnews.com (ThomasNet News) — Wed, 09 Jan 2008 07:07:43 -0500

Available with or without enclosure, Model K30E includes 50 hp PC-controlled hydraulic power down feed for smooth consistent operation, and LED beams for wheel wear compensation and rapid return after cut is finished. Enclosed units have internal lights for visibility, and all machines feature hydraulic clamping and flood coolant system. Different horsepower motors are available, depending on material being cut and cycle time required.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Abrasive Cut-Off Saws

Abrasive Saw cuts structural steel and wide parts.

info@productnews.com (ThomasNet News) — Mon, 03 Dec 2007 07:42:26 -0500

Featuring sawhead that moves lengthwise for wide cuts, Model K20RS 20 in. abrasive wheel saw can be operated chop style for cut-off or radial style for long parts. Saw includes 1 in. spindle arbor; 2,500 rpm spindle speed; 15 hp, 3-phase motor; and foot-operated chain vise. Capacities are 6 and 18 in. for structural steel, I-beams, and shapes.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Abrasive Cut-Off Saws

Abrasive Cutter features manual control.

info@productnews.com (ThomasNet News) — Fri, 22 Jul 2005 07:49:29 -0500

Delta® Manual Abrasive Cutter includes 14 in. blade capacity, 10 hp motor, and electronic motor brake. Manual cutting lever allows operator to feel cutting action and adjust blade feed rate, permitting quick cutting of soft materials and burn-free cutting of hard materials. Machine features protective fiberglass hood, retractable steel blade guard, 3-button control panel with E-stop, and safety latching mechanisms to keep hood closed during operation.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Cutters | Abrasive Cut-Off Machinery

Abrasive Saw cuts wide range of metals.

info@productnews.com (ThomasNet News) — Tue, 06 May 2003 07:33:56 -0500

RIDGID® CM1450 cut-off saw makes 45° cuts at both right and left angles in pipe iron, angle iron, rebar, and metal studs. Cast-iron base has non-slip rubber feet for support and low vibration, while die-cast aluminum housing helps dissipate heat. Motor operates at 120 V, 15 A at speeds to 3900 rpm. Saw includes D-grip handle, tool-less fence adjustment, spark-arresting covers, and 14 in. abrasive disk with 1 in. diameter arbor hole.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Abrasive Cut-Off Saws

Air-Powered Saw converts into chop-off saw.

info@productnews.com (ThomasNet News) — Thu, 12 Sep 2002 08:11:25 -0500

Model APS-438 uses chain-mount Single Cut Bracket to convert into portable chop-off saw that cuts tube, pipe, or bar stock from 2 to 5 in. OD. Featuring 3 hp motor that runs on 90 psi, saw uses 10 or 12 in. fiberglass-reinforced abrasive blades that leave no HAZ (heat affected zone). Saw produces square cut with ±1/16 in. accuracy, and can cut stainless steel, inconel, and other hard materials.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Abrasive Cut-Off Saws | Air Powered Saws

Abrasive Saw cuts 5 in. solids and 8 in. shapes.

info@productnews.com (ThomasNet News) — Mon, 29 Apr 2002 07:49:38 -0500

Model K30PH 30 in. saw features air over oil power downfeed, 1 3/4 in. arbor with sealed ball bearings, 1,800 rpm spindle speed, and 25 hp motor with magnetic starter. It also includes cog belt drive, cam vise, heavy safety guard, and down stop. Stock conveyor is optional.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Abrasive Cut-Off Saws | Sawing Machinery | Abrasive Cut-Off Machinery

Semi-Automatic Saw performs wet abrasive cutting.

info@productnews.com (ThomasNet News) — Mon, 29 Apr 2002 07:49:38 -0500

Model K20E totally enclosed saw features 15 hp SD motor with magnetic starter, 1950 rpm 1 in. spindle arbor, and coolant pump system with dual coolant hoses. Operation includes manual feed with air over oil precise downfeed, and automatic saw head return at end of cut. Adjustable down stop limits depth of cut. Unit includes V-belt drive, sealed ball bearings, air chain vise, and front and side access doors.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Saws | Abrasive Cut-Off Saws | Sawing Machinery | Abrasive Cut-Off Machinery

Abrasive Saw cuts pipe up to 5 ft in diameter.

info@productnews.com (ThomasNet News) — Tue, 11 Dec 2001 13:39:36 -0500

Air-powered APS-438 saw and track mount assembly can square cut any diameter pipe from 6-60 in. O.D. up to 4 in. thick with ±1/8 in. accuracy and no heat affected (HAZ) zone. Its stainless steel track mounts securely around pipe's circumference and pipe trolley on which abrasive saw travels. Saw uses fiberglass reinforced blades from 8 to 12 in. O.D., or optional carbide tipped blades, and glides around track on 4 V-grooved wheels.

This story is related to the following:
Machinery and Machining Tools
Portable Tools

Search for suppliers of: Abrasive Cut-Off Saws | Pipe & Tube Saws