ThomasNet Industrial Newsroom -

Pneumatic Hacksaw cuts pipe and structural steel up to 24 in.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Sep 2008 12:16:33 -0500

With blade stroke of 2 3/8 in., Model 5 1212 0050 will cut 24 in. dia pipe at 90° in one pass. Unit features 1.5 hp air motor that uses 51 cfm air volume at 90 psi air pressure. Certified to ATEX regulations EX 112 GcT5, saw can operate in hazardous atmospheres and environments classified as EX Zone 2. Portable tool uses range of heavy-duty blades from 8-37 in. long, which are available in HSS (M2) and HSS-SL with Molybdenum for cutting carbon steel, SS, and hard alloys.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Pneumatic Saws | Pipe & Tube Saws | Bi-Metal Hack Saws | Pneumatic Saws | Pipe & Tube Saws | Bi-Metal Hack Saws | Pneumatic Saws | Pipe & Tube Saws | Bi-Metal Hack Saws

High-Thrust Groover suits rolling or cutting operations.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Sep 2008 12:16:30 -0500

With capacity of ¾ in. dia x .120 in. wall, 24014 High Pressure/High Thrust Groover operates by advancing and closing spinning head containing rolling or cutting tools over clamped tube. Depth of rolled or machine cut grooves can be changed, and design facilitates access to tooling as well as tool changes. In addition to 5 sec cycle time, machine features jaw opening of 1¼ in. and clamp force of 3 tons. It comes with 7½ hp spindle motor and variable speed control.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Cutting Machinery | Grooving Machinery | Pipe Groovers | Cutting Machinery | Grooving Machinery | Pipe Groovers | Cutting Machinery | Grooving Machinery | Pipe Groovers

Etch System for advanced memory interconnects.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Sep 2008 07:35:17 -0500

Optimized for throughput and MTBC ratings, Applied ProducerÂ® Etch system performs interconnect dielectric etch steps needed for production of Flash and DRAM memory chips. Reactor design promotes high-throughput, high-yield dielectric etch in DRAM and NAND Flash interconnect structures from 8X-4X nm technology nodes. System is suited for chip manufacturing applications such as low k deposition, strain engineering, litho-enabling films, thermal films, and high-temperature PECVD.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Etching Machinery | Plasma Etch Control Systems

Reciprocating Saw is cordless.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Sep 2008 07:41:39 -0500

Suited for cutting pipe, strut, threaded rod, steel studs, and other miscellaneous steel, Hilti WSR 36-A can also be used for cutting wood with nails, wood beams, treated lumber, plywood, wood composites, or plastics. With 36 V 3.3 Ah CPC Li-Ion battery, it features Active Vibration Reduction technology that reduces vibration by up to two-thirds. Including ergonomic operating controls and comfortable handling, it maintains control when cutting overhead and in difficult to reach areas.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Wood Cut-Off Saws | Metal Cutting Saws | Reciprocating Sawing Machinery | Hand Saws | Cordless Tools

Waterjet System features 8 x 13 ft work envelope.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 28 Aug 2008 07:42:10 -0500

Equipped with exposed tank that accommodates overhead loading, Mid Rail Gantry Waterjet System features 1 abrasivejet cutting head, but can accommodate second head to increase productivity. Ball-screw driven with heavy-wall tubular steel construction to eliminate vibration, Mid Rail Gantry utilizes direct-coupled ac brushless digital servo motors and single or double carriages. Industrial PC controller can be configured so that all 3 axes are fully programmable.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Waterjet Cutting Systems

Pressed-to-Size Inserts perform aggressive metal cutting.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 25 Aug 2008 07:37:07 -0500

Available in T or D variations, CNC-pressed Toroid inserts have shock-absorbing cutting edge designed to handle heavy chip loads. Products offer heat absorption capabilities and are designed to promote extended tool life. Positive top rake reduces cutting forces and torque. T-land offers reinforced cutting edge for steels, irons, and hard milling, while dished face provides high-positive cutting edge for stainless steels, high-temperature alloys, and gummy materials.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Milling Cutters | Inserts

Plasma Cutting System has recommended cut capacity of 1/2 in.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 18 Aug 2008 07:38:22 -0500

Equipped with built-in CNC interface and 50:1 voltage divider, single-gas Powermax45Â® is suited for mechanized cutting of duct work and other materials up to 3/8 in. Portable system features 45 A output current, 50% duty cycle, and quick disconnect torch that facilitates transitions between handheld and mechanized applications. Unlike oxyfuel systems, Powermax45 requires no pre-heating of work piece and no regulating of flammable gases.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Plasma Cutting Equipment

Laser Cutting System (2D) comes with laser resonator.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 13 Aug 2008 07:43:35 -0500

In addition to fully automated material handling system, SYNCRONO is available with CV5000 Laser Resonator, which enables accelerated cutting speeds, thick materials processing, and optimal cut quality production with minimal heat-affected zone. Laser head is designed with 2 additional linear-driven parallel kinematic axes on moving gantry, allowing cutting head to cut at acceleration up to 6 G and make 1,000+ holes/min. Beam path is constant throughout 60 x 120 in. work area.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Laser Cutting Equipment

Conveyorized Cutters target apparel and flexible materials.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 07 Aug 2008 07:46:49 -0500

Supplied with CutWorksÂ® software for full automation, single-ply GERBERcutterÂ® Models DCS3600/3600L include TargetVision digital camera technology for capturing detailed images of materials placed on cutting table. AutoMat System, which addresses requirements of specialized mat industry, uses scanner technology that recognizes where mat's carpet and rubber border meet. With longer cut window, Model DCS3600L enables manufacturers to cut pieces up to 10 ft in length between bites.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Textile Industry Products

Search for suppliers of: Fabric Cutters

Electric Diamond Cutters feature 2.6 kW motor.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 04 Aug 2008 07:52:09 -0500

Designed for reinforced concrete, granite curbstone, slabs, bricks, metal beams, and steel pipes, Models DCH 230 and DCH 300 Electric Diamond Cutters have cutting depth adjustment mechanism to reach depths of 3.4 and 4.7 in. Hilti Smart Power electronic control system constantly regulates motor power to suit material being cut and pressure applied to tool. Employing ergonomic in-line design with grip and cutting blades in exactly same axis, units allow precise guidance with less pressure.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Cutters | Metal Cutting-Off Machinery | Diamond Tooling | Steel Cutters | Grinding Tools

Gate Cutters gently cut across molecules.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 04 Aug 2008 07:52:09 -0500

Eliminating violent pulling apart of molecules, IMS Heated Gate Cutters allow large gates to be cut with minimal stress on part and on worker by reducing most cracking, fracturing, and whitening around gates, leaving smooth surface. Precision temperature controller holds temperature steady, while foamed insulation keeps handles cool. Engineered from scratch to be heated, units have field-replaceable components including blades.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Plastic Cutters | Gate Cutters

Cutter is suited for hard, soft, and fibrous materials.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 04 Aug 2008 07:52:02 -0500

Employed for coarse grinding of materials into particles of uniform sizes ranging from granules down to 20-30 mesh, Model SCC-15 Screen Classifying Cutter has 15 in. throat width and can be fitted with 30 parallelograms with 60 cutter inserts. Bed screen perforations range from 1/32 to 1Â½ in. in dia and up to 3 in. square, according to material characteristics and desired particle size. Shaft rotates at 30-3,600 rpm producing up to 500 cu ft/hr of sized product, depending on application.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Rotary Cutters | Plastics Size Reduction Grinders | Cutting Machinery | Cutter Grinders | Shear Cutters

Steel Beam Splitter shears wide flange into 2 T-shaped beams.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Aug 2008 08:02:06 -0500

Steel Beam Splitter can cut any beam up to 40 in. wide and up to 9/16 in. web thickness without need to straighten beams once they are split. Guide rail exit system leads beam out of cutting blades and keeps beam supported and centered while it exits shear. Main control is wired to accommodate preheat/quenching system.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Rotary Shears | Beam Shears | Splitting Shearing Machinery | Metal Splitting Cutters

PCB Depanelizer can singulate long circuit boards.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Aug 2008 07:51:05 -0500

Capable of singulating skip routed PCB panels up to 24 in. long, Model K4000 motorized linear blade depanelizer features height adjustable front and back support, take up table, and right and left blade guards that ensure operator safety. It is offered with optional light beam safety curtain across front of blades and conveyor belt to bring singulated PCBs to side for easy removal. IR sensor on end of conveyor stops belt for PCBs with components on them.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Depaneling Systems | Printed Circuit Board (PCB) Depaneling Machinery

Diamond Saw cuts through quartz and glass.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 31 Jul 2008 07:42:12 -0500

Designed to use 1 in. wide grit-edged saw bands, Model 2012-D12 features 20 in. throat with standard 12 in. work height that accommodates wide range of material sizes. It includes 20 in. wheels to minimize band fatigue, electric ballscrew-controlled cast iron table with 12 in. stroke, and variable frequency 5 hp ac drive with band speeds from 550-5,500 fpm. Device includes feed-rate control from operator panel, as well as easily accessible coolant reservoir and pump system.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Band Saws | Diamond Sawing Machinery

Laser Cutter achieves cutting tolerances of Â±.005 in.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 31 Jul 2008 07:42:09 -0500

Featuring 120 x 60 in. work envelope, Bystronic Byspeed 3015 is coupled with 4,400 W resonator to promote power efficiency and reduce electrical usage during processing. It can cut directly through various types of material, and integral closed machine compartment helps reduce emissions. Offered as option, automatic table loader includes high-powered vacuum suction lifting to carry materials from stack of inventory over cutting table.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Laser Cutters

Semi-Automatic Cold Saw meets demands of production sawing.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Jul 2008 07:44:53 -0500

Along with vertical column design for vibration-free sawing, Model C360SA features 14 Â½ in. HSS blade; 4 hp, 3-phase TEFC motor; 2-speed spindle, 18 and 36 rpm; totally enclosed transmission; 24 V controls; and built-in flood coolant. Controls facilitate setup and operation, while full guards are removable for cleaning. Cutting capabilities include round and square profiles or solid mild steel as well as rectangular shapes of various sizes.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Metal Cutting Saws | Cold Saws | Automatic Saws

Manual Cold Saw uses solid hinge-type design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Jul 2008 07:43:13 -0500

Suited for prototype or limited production work, Model C315/350 features 14 in. HSS blade, 3.5 hp 3-phase TEFC motor, 2-speed spindle, totally enclosed transmission, 24 V controls, and built-in flood coolant. Double vise assembly, with 6Â¼ in. max opening, provides holding power on both sides of cut for burr-free operation. Machine cuts round shapes up to 4 in. dia at 90Â° and 3Â¾ in. dia at 45Â°; plus square and rectangular shapes up to 3Â¾ x 5 in. at 90Â° and 3Â¾ x 3Â¾ in. at 45Â°.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Cold Saws

Trimmers defat beef strips and rounds.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 24 Jul 2008 07:53:01 -0500

Equipped with large circular blade, WhizardÂ® Series II Model 1000 Trimmers optimize yields, product appearance, and product margins. Captive hex-head housing screws speed removal and reinstallation of blade housing and blades, while gear mesh design contributes to smooth blade operation. All handpieces feature contoured handle to minimize grip force and torque momentum. Operators can choose from 5 interchangeable handle sizes.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Food Processing and Preparation

Search for suppliers of: Meat Packing & Processing Equipment | Power Meat Cutters | Meat Slicers

Waterjet System suits large scale precision machining.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Jul 2008 07:29:42 -0500

Measuring 265 x 152 in., Model 80X JetMachiningÂ® Center has Intelli-TRAX traction drive that enables expansion of cutting envelope to 20 ft. It features X-Y travel of 165 x 80 in., Intelli-MAXÂ® Software, programmable motorized Z-axis with precision MAXJETÂ® 5 Nozzle Assembly, high pressure direct drive pump, and rapid water level control for submerged cutting. System can calculate velocity of tool path at over 2,000 points/in., enabling complete control over motion of abrasivejet.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Services

Search for suppliers of: Abrasive Machining Equipment | Machining Centers | Waterjet Cutting Machinery | Waterjet Machining