ThomasNet Industrial Newsroom -

Stud and Joist Drill has 11 A motor for max performance.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 05 Nov 2008 07:16:21 -0600

Built to drill holes in wood using ship auger bits, hole saws, and self-feed bits, DWD460 offers variable speed settings of 0-300 and 0-1,300 rpm for matching application requirements. This ½ in. stud and joist drill also features mechanical, torque-limiting clutch as well as Bind-Up Control(TM) feature that senses stall conditions during use and adjusts motor torque to manageable level. Multi-position, adjustable bail handle and 2-position side handle lend to leverage and control.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Wood Boring & Brace Drills | Hand Drills

Self-Feed Bits enable clean hole cutting, even in wet wood.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 10 Jul 2008 07:28:17 -0600

Including 13 bits ranging in size from 1 to 4 5/8 in. dia, self-feed bits are equipped with replaceable coarse threaded tip that draws them into wood without user pressure, eliminating run-out or wobble and pulling through the wood for accurate holes. High-speed 3 5/8 and 4 5/8 in. steel bits feature double chip lifter for optimal removal, while 1 to 2 9/16 in. bits feature 7/16 in. hex shank which allows them to be used in quick change chucks and extension mates.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Boring Bits | Cut-Off Bits | High Speed Steel Bits | Wood Boring Bits | Machine Tool Bits

Metal Boring Bars suit extended-length applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 07 Jul 2008 07:38:35 -0600

Engineered specifically for extended-length boring applications from 4:1 up to 6:1 diameter-to-length ratio, Heavy Metal-Boring Bars handle finishing and medium-machining ID turning, grooving, and threading tasks. They feature heavy metal construction with brazed steel heads and help reduce failure possibilities while in use. Bars are available in variety of sizes, including 8, 10, 12, 16, and 20 mm and 3/8, 1/2, 5/8, ¾, and 1 in.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Boring Bars

Hole Cutter handles rough wood applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 12 May 2008 07:36:02 -0600

Designed for drilling large holes in rough wood applications, Big Hawg(TM) hole cutter is available in 8 dia ranging from 2 1/8 to 6¼ in. It features 3 hardened steel teeth that can cut up to 600 holes in wood without needing to be resharpened. Combining inset teeth, reduced pilot bit shank, and 3 deep gullets, unit enables fast plug removal.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Wood Boring & Brace Drills | Hole Cutters

Wood Boring Bits feature self-feeding design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 13 Feb 2008 07:37:31 -0600

Suited for boring holes in wood for running pipe, tubing, and conduit, Bul-z-Eye(TM) Bits feature aggressive twin-edges with precision-ground teeth. Wobbling is eliminated by precision-machined shaft that achieves perfect bit concentricity, and by burr-free lead screw that feeds bit through wood at consistent rate. Available in 12 bit diameters ranging from 1 to 4 5/8 in., bits are 4 5/8 in. long with 7/16 in. shank to accommodate ½ in. drill chucks.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Boring Bits

Turning Tool helps locate micro-boring bars in holder.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 Nov 2007 07:41:31 -0600

Multidec® MICRO-BORE System incorporates angled back that locates bar less than .0004 in. against a positive location pin in bar holder. Solid carbide bars range in size from 1-8 mm, and have thru-coolant capability. Suited for small parts precision machining in medical applications, system provides high quality internal machining operations, including chamfering, spotting, threading, ID grooving, and internal profiling. Different coatings are available to suit application requirements.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Turning Tools | Boring Bars

Boring Heads provide fine adjusting resolution.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 26 Jul 2007 07:38:51 -0600

Eliminating use of Vernier scale, EWB UP Series offers fine adjusting resolution of .001 mm steps of diameter corrections or .00005 in. on diameter for inch graduated heads. Units include backlash-free tool carriers for direct diameter adjustment, and tool carrier locking system that does not influence diameter and assures repeatability, even under high speed or interrupted cutting. Six heads offer boring range of .787-3.94 in.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Boring Heads

Indexable Insert Drills operate under extreme conditions.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 11 Apr 2007 07:45:26 -0600

With KAB connection featuring high clamping force, indexable insert drill is suited for drilling in inclined entry or exit surfaces. Available in 16-30 mm and 3 x D and 4 x D with KA6 connection, product includes straight flutes that ensure short distance for chip evacuation and high radial/torsional rigidity. Inserts are available for all kinds of workpiece materials with 4 cutting edges, while adjustable drill holder allows drills to cut fractional sizes.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Indexable Drills | Insert Style Drills | Precision Drills | Indexable Tools | Precision Tools

Boring Bars include vibration dampening mechanism.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 01 Nov 2006 07:46:08 -0600

Featuring dampening mechanism that eliminates chatter, Anti Vibration X-Bars produce fine finishes at up to 6x length of diameter. With shank sizes ranging from 0.500-1.000 in. dia, bars are coolant thru and available with CCMT, TCMT, and TPMT style inserts for variety of chipbreakers. They are suited for deep hole boring, step boring, bottom facing, and copying.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Boring Bars | Machine Tools

Fine Boring Tools feature composite construction.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Oct 2006 07:41:43 -0600

TruLine Tool® series is constructed of composite carbon fibers epoxied to stainless steel cover or sleeve that can be final machined with necessary insert pockets, screw holes, and wear pads. Combined with polycrystalline diamond guide pads and length-to-diameter ratios suited for all types of machine spindles, products promote chatter-free machining up to 30,000 rpm. They can be manufactured as solid bars or designed with detachable heads, and tool shanks can be CAT, BT, or HSK.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Boring Heads feature integral shank design.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 23 Oct 2006 08:04:02 -0600

Available for CAT40, BT40, HSK-A63, and Capto C6 size spindles, EW2-50XL Series provides shorter tool than modular shank/boring head combination. Heads can be used with existing center-mounted boring bars from .078-2.125 in. dia and side-mounted insert holders from 3.15-6.00 in. dia. Units deliver precision finish boring with adjustment dial displaying increments of .0002 in./dial division and Vernier markings to accurately adjust to .00005 in. on diameter.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Boring Heads

Tipped Tooling suits high-production applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 09 Oct 2006 07:48:50 -0600

Designed for reaming, fine boring, and milling, MODCO® Tipped Tools can be engineered with steel or carbide bodies and are provided in any required diameter and length combination. PCD tips are available for aluminum and other non-ferrous material applications, while CBN tips are offered for iron jobs. Construction technique allows tools to be engineered with appropriate number of tips to achieve required part dimensions, surface finish, and geometric relationships.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Boring Tools | Milling Cutters | Boring Cutters

Boring Bit is suited for short holemaking applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 02 Oct 2006 07:47:44 -0600

CoroDrill 880 has center insert that uses Step Technology to facilitate smooth entrance into workpiece and perfectly balance cutting forces. To hold tight tolerances and achieve optimal surface finish, its inserts present 4 cutting edges and wiper geometry. Choice of insert geometries and grades are available for various applications and materials, including helical interpolation, plunge drilling, and boring. Diameters range from .473-2.5 in.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Hole Cutters | Boring Bits

Boring Heads offer sub-micron adjusting resolution.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 02 Oct 2006 07:47:43 -0600

Offered in 6 models for boring range of .787-3.94 in., Sub-micron Boring Heads offer play-free tool carrier to direct diameter adjustment accuracy of 0.001 mm/div. Inch graduated heads will adjust 0.00005 in./div on diameter. Flexibility of KA connection permits wide range of spindle interface requirements. Integrated counterweight can be adjusted to any bore diameter by separate scale to permit high-speed operation.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Boring Heads

Boring Heads are offered with chamfer rings.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 11 Aug 2006 08:10:20 -0600

Small-diameter boring tools of 112 series are available with chamfer rings for sequence chamfers on bore diameters from .496-1.248 in. Existing tools can be retrofitted to perform additional fixed 45° chamfer in same boring operation. Chamfer ring slides over boring bar and locks into place with one screw. Made from aluminum, rings are designed for 12 mm and .625 in. dia boring bars and have minimal affect on tool balance.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Boring Heads

Boring Tools deliver sub-micron adjustment resolution.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 20 Jun 2006 08:05:04 -0600

Kaiser sub-micron series boring tools offer play-free tool carrier for direct diameter adjustment accuracy of 0.00005 in./div. on diameter. Carrier locking system provides precise repeatability, even under high speed or interrupted cutting. Six boring heads are available for boring in range of .787-3.94 in. and can be used with wide range of spindles. Integrated counterweight can be adjusted to any bore diameter by separate scale to permit high speed operation.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Boring Heads

Boring Kit ranges from 0.31 to 6.69 in.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 19 Apr 2006 08:59:53 -0600

Provided in protective, foam-lined case, BohrSTAR 12-Piece Kit includes one 54 mm head, 6 boring bars, 2 adapter plates with cartridge, 10 inserts, and all necessary wrenches. AccuSET vernier dial adjusts in 0.0001 in. increments, while tapered screw coupling design dampens vibration.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Boring Tools | Boring Bars | Tool Kits

Boring Heads have compact, integral-shank design.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 23 Mar 2006 07:03:47 -0600

Available for CAT40, BT40, HSK-A63, and Capto C6 size spindles, EW2-50XL boring heads provide shorter tool than modular shank/boring head combination (1.3 in. shorter on CAT40 taper). Products may be used with existing center-mounted boring bars with 0.078-2.125 in. dia and side-mounted insert holders with 3.15-6.00 in. dia. Precision finish boring is possible via adjustment dial that displays increments of .0002 in./dial division and Vernier markings to adjust to .00005 in. on dia.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Boring Heads

Boring Bars and Inserts are designed for rigidity.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 21 Feb 2006 07:08:26 -0600

Suited for working with insertable boring bars in bores as small as .160 in., THINBIT® MINI-BORE® inserts are available in 2 grades of sub-micron grain carbide with TiN, TiCN, TiAlN, and Diamond coatings. MINI-BORE carbide triqon bars are designed for rigidity. They come in 3/16, ¼, and 3/8 in. dia for WCGT style .156, .187, and .250 in. IC inserts.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Carbide Inserts | Boring Bars

Boring Bars provide internal grooving in small holes.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 12 Dec 2005 07:06:02 -0600

For making grooves in holes down to 10 mm dia, CoroCut MB (minibar) offers range of insert widths from 0.7 mm for circlip grooves as well as different insert sizes for shallow and deep grooves. Program also offers inserts for turning and threading. Suited for steel and stainless steel applications, boring bars are designed with internal cutting fluid supply directed at cutting edge via 2 nozzles for effective chip evacuation and sufficient cooling.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Boring Bars