ThomasNet Industrial Newsroom -

Bar Seals and Adapter Plates suit collet chuck applications.

info@productnews.com (ThomasNet News) — Tue, 12 May 2009 08:43:05 -0500

With Adapter Plates, users can mount collet chucks and 3-jaw chucks to wide range of spindles. Larger chuck can be mounted on smaller spindle for increased capacity, or smaller chuck can be mounted on larger spindle for increased tool clearance and speed. For applications that produce fines and dust, Bar Seal Assembly can be fitted to Royal S-type collect chucks.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Collet Type Tool Holders | Collet Chucks | Chucks | Collet Adapters | Two & Three Jaw Chucks

Vulcanized Collet Heads can be interchanged in seconds.

info@productnews.com (ThomasNet News) — Mon, 12 Jan 2009 08:31:02 -0500

Quick-change FlexC(TM) Vulcanized Collet Systems, models A and D, are accurate to .0004 in. TIR, while DL models are accurate to .0008 in. TIR. Gripping range of .020 in. above/below nominal size allows for variations in bar stock without need for collet change. Hardened chrome-nickel steel collet heads feature concentricity of .0002 in. and pull-back thru-hole, pull-back stationary stop, and push-to-close dead-length® styles are available for main and sub-spindle CNC lathe applications.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Round Collets

Collet Chucks accept ER collets from any manufacturer.

info@productnews.com (ThomasNet News) — Wed, 03 Dec 2008 07:46:38 -0500

Available with BIG-PLUS interface, ER16 and ER32 Collet Chucks are capable of supplying coolant through spindle or through spindle flange. Model ER16 is available in 2.5, 4, and 6 in. gauge lengths for 40 taper, and 3.5, 5, and 6 in. gauge lengths for 50 tapers, while ER32 chuck is available in 3, 4, and 6 in. gauge lengths for 40 taper and 3.5, 5, and 6 in. gauge lengths for 50 tapers. They are supplied with tool body and collet nut.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: ER Collets | Collet Chucks

Collet Systems expand to accommodate part variation.

info@productnews.com (ThomasNet News) — Thu, 05 Jun 2008 07:36:19 -0500

Instantly centering and locating parts without adjustment, Sure-Grip® Expanding Collet System consists of interchangeable collet heads that have -.001 to +.015 in. under-over capacity from specified size. Double-angle design ensures parallel gripping with optimal grip force, lending to stability and part accuracy, while built-in safety stop prevents collet from over-expanding. Systems are available for internal gripping diameters from 1/8-4 in.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Expanding Collets | Collets

Collet Gripper handles delicate or rugged objects.

info@productnews.com (ThomasNet News) — Tue, 06 May 2008 07:40:55 -0500

Enabling collet to grip part on either O.D. or I.D., C-8800 Heavy-Duty 5C Collet Gripper can rapidly pick and place uniformly sized objects, and features pneumatically adjustable 360° clamping force for parts transfer. Unit can also function as workholding device for grinding, deburring, or polishing operations.

This story is related to the following:
Machinery and Machining Tools
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Robotics

Search for suppliers of: Robotic Grippers | Collets

Collets are compatible with PG 10 toolholders and machines.

info@productnews.com (ThomasNet News) — Mon, 31 Mar 2008 07:41:13 -0500

Developed to counteract inaccuracies caused by runout when using small diameter cutting tools for high precision machining, PG Microbore Collets achieve T.I.R. of less than 0.0001 in. or better after 20,000 tool changes. They are offered in standard and metric sizes, and can accurately clamp tool shanks ranging from 0.0079-0.0354 in.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Collet Type Tool Holders | Collets

CNC Collet Chucks offer dead-length operation.

info@productnews.com (ThomasNet News) — Mon, 13 Nov 2006 07:44:26 -0500

With runout guarantee of 0.0003 in. TIR or better, Accu-Length(TM) CNC Collet Chucks include 3J A2-5 and 3J 110 mm small body models designed for sub-spindles, and S-26 A2-5 model that provides 2 5/8 in. gripping capacity for smaller machines. Available accessories include hardened and ground solid collets, emergency collets that can be bored to size, ejectors for sub-spindle part removal, collet stops, and bar seal assembly that protects internal chuck components from coolant and debris.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Collet Stops | Collets | Collet Chucks

ER Coolant Collets feature self-sealed design.

info@productnews.com (ThomasNet News) — Mon, 04 Sep 2006 07:54:00 -0500

Featuring staggered slot design, ER Coolant Collets prevent coolant from reaching collet face without need for plugs, discs, or other hardware. Units are made of solid steel, and contain no wearable rubber or silicone parts. With coolant pressure of 1,800 psi, collets are designed for use with cylindrical shank tools in diameters ranging from 4-26 mm.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: ER Collets

Collets and Chucks combine stability and precision.

info@productnews.com (ThomasNet News) — Tue, 30 May 2006 08:20:39 -0500

Used in various machining applications, CoroGrip pencil collets are capable of reaching into deep cavities and pockets as well as machining challenging areas without compromising part accuracy, repeatability, or stability. Products are available for endmills with 6, 8, 10, and 12 mm shank diameters and are suited for die and mold industry. Also available, CoroGrip precision power chucks provide clamping force and stability needed for high-speed machining.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Collets | Collet Chucks

Collet Holder features air-operated design.

info@productnews.com (ThomasNet News) — Thu, 12 Jan 2006 07:03:45 -0500

Using standard 5C collets, hardened and ground 1-AC Air Collet Fixture holds up to 1 1/8 in. stock or through-stock up to 1 7/64 in. Step-chuck collets and expanding collets can also be used. With max recommended air pressure of 120 psi, double-acting, piston type air cylinder develops holding power 18 x air line pressure. Featuring 2 lugs for mounting, holder can be mounted horizontally or vertically. Base accommodates chip removal and coolant flow.

This story is related to the following:
Machinery and Machining Tools
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!

Search for suppliers of: Holding Fixtures | Collet Fixtures

Collets come in standard, precision, and sealed designs.

info@productnews.com (ThomasNet News) — Fri, 23 Dec 2005 07:06:53 -0500

While TG collets are ground for 0.0004 in. runout, inch and metric SX ultra high precision colletes provide 0.0002 in. or better runout. Providing 0.0001 in. accuracy and repeatability, VX inch and metric collets have coolant-through, rear pull design. ER collet system, ground 0.0004 in. (standard) or 0.0002 in. (Ultra Precision), have coolant disc systems and come in 3 tap holding designs. Available for ¾ and 1¼ in. bores, MC inch and metric collets offer 0.0002 in. repeatability.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Tapping Collets | ER Collets

Coolant Collets seal up to 1,000 psi.

info@productnews.com (ThomasNet News) — Fri, 09 Dec 2005 07:08:27 -0500

Compatible with all 100TG chucks, Series 100TG-OH features one-piece design with short slots that prevent coolant from reaching face of collet, eliminating need for rubber or silicone seals, and minimizing loss of accuracy associated with multi-piece designs. Collets are available from 15/64-1 in. in 1/64 in. increments and metric sizes from 6-26 mm.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Collets

Coolant Flush Collets work with coolant-through tooling.

info@productnews.com (ThomasNet News) — Thu, 08 Dec 2005 07:11:27 -0500

Offered in 0.1181-0.7874 in. dia, powRgrip coolant flush collets feature 3 equally staggered serrations to flush coolant through toolholding systems and ensure proper amount of fluid is reaching cutting tool and chips. Design flushes coolant along sides of tool and to tip of cutter, eliminating unwanted chip particulate. Collets, made of spring steel, are metallic-sealed for pressure capability up to 2,000 psi. TIR is rated at 0.0001 in. or better.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Collets

Shrink Fit Adapters are suited for high-speed machining.

info@productnews.com (ThomasNet News) — Fri, 02 Dec 2005 07:23:25 -0500

Designed to complement CoroGrip and HydroGrip precision chuck programs, shrink fit adapters have balanced design suited for deep and narrow applications in die and mold manufacturing. Retention force and uniform grip around tool shank promote safe and repeatable precision clamping of cutting tools with cylindrical shanks. Adapters for shank diameters from 6-32 mm are available with Coromant Capto sizes C4, C5, and C6.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Collet Adapters

ER Collets suit precision cutting applications.

info@productnews.com (ThomasNet News) — Wed, 30 Mar 2005 08:43:27 -0500

Available individually and in sets, Royal ER collets are manufactured from alloy steel and hardened for strength. Products, accurate to 0.0002 in. TIR, are ground to exact inch sizes in 1/32 in. increments for precise cutting tool contact.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: ER Collets

Collet/Collet Body incorporates single-piece design.

info@productnews.com (ThomasNet News) — Wed, 19 Jan 2005 08:00:26 -0500

Able to fit existing torch configurations, single piece collet/collet body facilitates changeover between tungsten sizes while optimizing tungsten centering on TIG applications. Unit, available in 10N and 13N series, combines functions of traditional 2-piece collet and collet body into one part while maintaining performance. Eliminating mismatch of collets and collet bodies, product reduces part count and eliminates need to maintain or manage spare inventory.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Special Custom Collets

Collet System operates up to 40,000 rpm.

info@productnews.com (ThomasNet News) — Mon, 30 Aug 2004 07:44:51 -0500

Available in 30, 40, and 50 tapers, VC Toolholder features slim, smooth profile that eliminates noise related to high-speed rotation. Dampening of micro harmonic vibrations is achieved with use of groove under nut. Eight degree collet design contributes to rigidity and gripping torque, while extended straight portion of collet pilots and maintains concentric placement of tool. Flat shoulder design results in heightened perpendicular force transfer.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Collets | Machine Tool Holders

Machinable Collet turns delicate parts.

info@productnews.com (ThomasNet News) — Tue, 30 Mar 2004 07:38:27 -0500

Usable with or without lathe collet closing system, machinable collets are suited for turning delicate parts. Knurled nut closes collet via internal taper, which engages matched taper on body of tool. Collet stem has .625 in. dia with machined ½ in. hex on end of stem to allow for work set-up off machine in production situations. Products are available in steel or aluminum and have machinable range of .125â�"1.00 in. dia x .50 in. deep.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Collets

Collets come in sets with wooden trays.

info@productnews.com (ThomasNet News) — Tue, 03 Jun 2003 07:43:07 -0500

Collet sets include single angle, double angle, and TG style with options that include rubber sealed, steel sealed, and coolant disk nut system collets. ER single angle collet sets come in 8 metric sets with 9 to 23 collets per set, and 6 different inch sets with 7 to 23 collets per set. DA double angle sets come in 15 different inch size sets with 9 to 41 collets per set. TG collet sets come in 8 different inch sets with 15 to 65 collets per set.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Collets

Collet Chucks feature coolant delivery system.

info@productnews.com (ThomasNet News) — Mon, 05 May 2003 07:36:55 -0500

High-Speed LSKâ"¢ Collet Chucks are pre-balanced for applications up to 40,000 rpm. Taper of 8° results in improved concentricity, greater rigidity and more powerful gripping torque. Run-out accuracy is 3 µm at 4x dia of cutting tool. System accommodates tools from 0.027 to 1 in. dia and coolant delivery system provides coolant through tool or along exterior of tool. Company's optional HSBalanceâ"¢ system has toolholders that can be re-balanced.

This story is related to the following:
Machinery and Machining Tools

Search for suppliers of: Tap Chucks | Tapping Collets | Machine Tool Holders