ThomasNet Industrial Newsroom -

Semisolid Pipe Sealant Stick does not spill or leak.

info@productnews.com (ThomasNet News) — Fri, 20 Nov 2009 08:27:10 -0500

Loctite QuickStix 5671(TM) PST® seals tapered pipe thread fittings made of stainless steel, aluminum, galvanized metal, and other inert metals. Single component sealant eliminates leak paths and ensures complete contact between threads to fully seal assembly. Designed to prevent corrosion and galling in threads, this off-white anaerobic paste will not shrink or crack, ensuring long-term reliability. Self-feeding stick applicator is suitable for overhead or hard-to-reach applications.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Pipe Thread Sealants

Wax Filler produces burnishing and wax pull effects.

info@productnews.com (ThomasNet News) — Thu, 12 Nov 2009 08:32:49 -0500

FI-22-532, is aqueous wax dispersion suited to both full grain and corrected grain leathers. Filler enhances polishing effect by darkening finish while also adding brightness. Resulting handle is warm, soft, and natural and maintains natural aniline appearance. Creamy white opaque liquid FI-22-532 withstands high temperature plating.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Materials and Material Processing

Search for suppliers of: Fillers | Wax Sealers | Leather Wax

Wax Filler is suited for use on shoe upper leathers.

info@productnews.com (ThomasNet News) — Fri, 30 Oct 2009 08:45:08 -0500

Wax filler, EX-FI-13-547 is designed for use in association with "American Lifestyle" finishes on variety of leathers. Opaque wax maintains waterproof resistance in finishes, and should be preheated to 75°C and applied using either padding or roller heated to 65-80°C. High melting point wax flows well with high temperature plating and can be used either alone or blended with other suitable oils or waxes to modify properties.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Materials and Material Processing

Search for suppliers of: Fillers | Wax Sealers | Leather Wax

Potting Compound features 6 hr working life.

info@productnews.com (ThomasNet News) — Fri, 30 Oct 2009 08:45:06 -0500

Qualified for filament winding applications, EP29LP-1 exhibits physical strength that enhances component resistance to thermal shock. It adheres to various substrates, including optical fibers and fibrous reinforcements, and has bond strength of greater than 3,500 psi. With peak exotherm as low as 50°C, this 2-part, optically clear epoxy is resistant to chemicals and offers compound flow, setup, and handling properties suited for large potting and encapsulating applications.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Materials and Material Processing

Search for suppliers of: Epoxy Potting Systems | Potting Compounds | Epoxy Compounds | Potting Materials

Epoxy Adhesive suits temperatures up to 600°F.

info@productnews.com (ThomasNet News) — Wed, 14 Oct 2009 08:33:09 -0500

Designed to withstand severe and repeated thermal cycling, Master Bond EP46HT-1 has continuous service operating temperature range of -100 to +550°F and can withstand intermittent exposures up to 600°F. It has glass transition temperature of over 235°C and provides adhesion to metals, glass, vulcanized rubbers, and most plastics. Product cures rapidly at elevated temperatures, is 100% reactive, and does not contain any solvents or diluents. Hardened system is electrical insulator.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Epoxy Adhesives | High Temperature Adhesives | Epoxy Sealants

Water-Based Duct Sealant is suited for indoor or outdoor use.

info@productnews.com (ThomasNet News) — Fri, 25 Sep 2009 08:36:24 -0500

LEED-compliant EverSeal is commercial- and residential-grade duct sealant that contains no VOCs and is UV and mildew resistant. Along with weather-resistance, EverSeal remains flexible, utilizing non-cracking formula that remains non-flammable in both wet and dry states. UL 181B-M Listed sealant will not drip or sag, undergoes minimal shrinkage, and adheres well to metal. Duct sealant was formulated to create airtight seal in low, medium, and high pressure applications.

This story is related to the following:
Green & Clean
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Duct Sealants & Adhesives | Volatile Organic Compound (VOC) Compliant Sealants

Water-Based Heatseal is designed for recycled PET.

info@productnews.com (ThomasNet News) — Fri, 11 Sep 2009 08:35:07 -0500

Offering options for offset, flexographic, and roll coat application, Latiseal® B7707AR provides perfectly bonded recycled RPET blister packages and does not crystallize over time. This 100% VOC-free solution, FDA-approved for indirect food contact, exhibits in-line wet trappable (wet inks) qualities and exhibits clarity with no milking of dark inks. Also available, water-based Latiseal® B7780AR for regular PET is formulated for in-line applications over wet inks.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Packaging Products & Equipment
Green & Clean

Search for suppliers of: Adhesive Sealants | Heat Sealing Components

Removable Liquid Gasket seals frequently serviced flanges.

info@productnews.com (ThomasNet News) — Tue, 25 Aug 2009 08:27:38 -0500

Designed to seal close-fitting flanges against same temperatures, pressures, and chemicals as traditional liquid gaskets, Loctite® 5203(TM) removes without machining or chemicals. Red anaerobic gasketing material ranges in viscosity from 50,000-100,000 cP and fills gaps to 0.010 in. without primer or 0.020 in. with primer. Designed to withstand operating temperatures from -65 to 300°F, gasket fully cures in 15 min to 6 hr and is suited for use in engines, pumps, and compressors.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Mounting and Attaching Products

Search for suppliers of: Flange Sealants | Gasketing | Anaerobic Adhesives

Metal Detectable Tape suits heat sealing equipment, chutes.

info@productnews.com (ThomasNet News) — Tue, 30 Jun 2009 08:35:02 -0500

FDA-compliant ANROB 254-MDT features PTFE-glass fabric with aluminum foil backing and silicone adhesive to provide non-stick surface to heat seal against, or a slippery cover for chutes that transport foods or drugs. Available in ¼-39 in. W x 36 yd rolls, tape is 9 mils thick and operates at 500°F continuous. Providing protection against worn tape falling into polybag or package and going undetected, this foil-backed PTFE tape can be identified by metal detector.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Textile Industry Products

Search for suppliers of: Glass Yarn Tapes | Heat Sealing Tapes | Packaging Tapes | PTFE Tapes

High-Purity Gels exhibit minimal moisture permeability.

info@productnews.com (ThomasNet News) — Wed, 10 Jun 2009 08:27:57 -0500

Available with refractive index of 1.54 and viscosities from 3,500-8,000 cP, LS-3354, LS2-3354, and LS3-3354 are designed for potting, encapsulating, backfilling, and dampening applications requiring soft gel with optical clarity. Cure can be achieved at ambient temperatures with humidity or accelerated with heat, and gels can be removed for rework if needed. Available in 1:1 mix ratio, products are suited for protecting electronic components from dust, debris, and moisture.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Optics and Photonics
Materials and Material Processing

Search for suppliers of: Potting Materials | Multi-Purpose Gels | Potting Compounds | Encapsulation Compounds

Silicone Gel offers refractive index of 1.40.

info@productnews.com (ThomasNet News) — Thu, 04 Jun 2009 08:25:51 -0500

Providing protection from mechanical shock, optically clear LS-3140 is suited for use as encapsulating, embedding, or potting compound for environmental protection of electronic assemblies. Low outgassing gel handles stress during thermal cycling without cracking or delamination. To meet multitude of processing requirements, LS-3140 cures at room temperature, or cure can be accelerated with heat. It is best suited for applications requiring operating temperature of -94 to 392°F.

This story is related to the following:
Materials and Material Processing
Chemical Processing and Waste Management
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Silicones | Silicone Encapsulants

Encapsulant Materials are designed for photovoltaic modules.

info@productnews.com (ThomasNet News) — Wed, 20 May 2009 09:28:50 -0500

DuPont(TM) PV5300 Series and DuPont(TM) PV5200 Series can protect solar cells. DuPont(TM) PV5300 Series sheets can be used for new module designs like building-integrated photovoltaic tiles for installation on building roofs. Based on polyvinyl butyral polymer technology, DuPont(TM) PV5200 Series sheets suit needs of thin-film solar power generation.

This story is related to the following:
Electronic Components and Devices
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Green & Clean

Search for suppliers of: Photovoltaic Components | Encapsulants

Encapsulant is used for manufacture of photovoltaic roof tile.

info@productnews.com (ThomasNet News) — Tue, 12 May 2009 08:43:05 -0500

Offered in thicknesses from 35-60 mil, DuPont(TM) PV5300 Series encapsulant sheets are made of clear ionomer and designed to enhance impact resistance, durability, and cost-per-watt efficiency of building-integrated photovoltaic (BIPV) tiles. Properties at 23°C include refractive index value of 1.49, tensile strength of 34.5 MPa, and specific gravity of 0.95. Dielectric constant is 2.9 @ 25°C, while surface and volume resistivity values are, respectively, 1 x 1016 W and 2.5 x 1016 W-cm.

This story is related to the following:
Green & Clean
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Encapsulants

Photovoltaic Encapsulant Sheets use PVB polymer technology.

info@productnews.com (ThomasNet News) — Mon, 11 May 2009 08:31:59 -0500

Designed to meet needs of thin-film solar power generation, DuPont(TM) PV5200 Series assures glass adhesion with optimal visible light transmission. Clear, pliable material is available in thicknesses from 15-45 mils, and is suited for module encapsulation using nip-roll/autoclave and vacuum laminating.

This story is related to the following:
Materials and Material Processing
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management

Search for suppliers of: Sheeting | Encapsulants | Polyvinyl Butyral

Printed Tapes come in range of materials.

info@productnews.com (ThomasNet News) — Fri, 08 May 2009 13:21:25 -0500

Available in Teflon®, Mylar, Kapton®, polyethylene, and foil materials, Printed Tapes come in anti-skid versions with grid and textured surfaces, and reflective styles in standard and retro dot approved patterns. Tapes are also available for security and tamper-evident applications. Some security tapes are self-destructive upon removal, while others change color or are printed with logo that cannot be reproduced. All can be custom converted to user requirements.

This story is related to the following:
Safety and Security Equipment
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Adhesive Tapes | Anti-Skid Tapes | Custom Tapes | Die Cut Tapes | Double Coated Tapes | Double Coated Foam Tapes | Foam Tapes | Kapton Tapes | Polyethylene Tapes | Printed Tapes | Reflective Tapes | Security Tapes | Tamper-Evident Tapes | Teflon Tapes

Two-Part Silicones suit potting and sealing applications.

info@productnews.com (ThomasNet News) — Mon, 04 May 2009 08:37:33 -0500

Designed to rapidly bond dissimilar substrates, Loctite® Ultra-Clear Two-Part Silicones maintain flexibility at temperatures from -60 to 450°F. Non-corrosive products cure through large gaps and enclosed bond lines, require no primers, and offer low-odor dispensing. With elongations up to 240%, materials withstand extreme vibration, flexing, and thermal shock. Products cure to handling strength in 15 min and offer shelf lives in excess of 12 months at room temperature.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management

Search for suppliers of: Potting Materials | Silicone Sealants | Silicone Adhesives

Drying Agent and Sealant fix leaks in refrigeration systems.

info@productnews.com (ThomasNet News) — Fri, 24 Apr 2009 08:38:46 -0500

Ultra Pack features 3 oz, vacuum-packed can of Dry-R, which chemically changes H2O to low-viscosity, non-oily, and residue-free liquid. It chemically reacts with H2O to form liquids soluble with AB, mineral, POE, and PAG oils used in refrigeration systems. Super Seal HVACR, designed for 1.5-5 ton AC/R systems, seals undetectable or inaccessible leaks, 300 microns or smaller, in condensers, evaporators, and line sets from inside out. Package also includes charging hose.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Materials and Material Processing

Search for suppliers of: HVAC Sealants | Drying Agents

Adhesive/Sealant contains no solvents or diluents.

info@productnews.com (ThomasNet News) — Wed, 15 Apr 2009 08:35:54 -0500

Storage-stable, one component, low viscosity system, EP19HT adhesive/sealant, impregnant, and liner features viscosity of 500-600 cps at 75°F and cures readily at elevated temperatures to tough, chemically resistant thermoset plastic. Recommended cure is 1 h at 250°F, while shorter cures can be achieved at temperatures between 325-350°F. Exhibiting minimal shrinkage upon cure, product has service operating temperature range of -60 to 400°F and tensile strength greater than 10,000 psi.

This story is related to the following:
Materials and Material Processing
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Impregnants | Impregnating Sealants | Metal Sealants | Metal Bonding Adhesives

Halogen-Free Adhesives suit assembly of handheld electronics.

info@productnews.com (ThomasNet News) — Fri, 03 Apr 2009 08:38:25 -0500

Loctite® line of halogen-free adhesives and sealants are formulated to contain less than 900 ppm bromine and chlorine as well as 1,500 ppm total halogens. Product range includes cyanoacrylates, light cure cyanoacrylates, epoxies, urethanes, UV acrylics, silicones, hot melts, two-part acrylics, and anaerobics used for bonding, sealing, gasketing, and mounting range of components. All meet IPC IEC No. 61249-2-21 requirements.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management
Green & Clean

Search for suppliers of: Silicone Adhesives | Ultraviolet (UV) Adhesives | Sealants | Hot Melt Adhesives | Epoxy Adhesives | Cyanoacrylate Adhesives | Anaerobic Adhesives | Acrylic Adhesives

Silicone Sealant/Adhesives suit glazing applications.

info@productnews.com (ThomasNet News) — Tue, 17 Mar 2009 08:30:28 -0500

One-component Bondaflex® Silfast(TM) 501 is suited for window fabrication, production of curtainwall and skylights, and impact security glazing systems in shop or field. Offering fast assembly solution, 2-component Bondaflex® Silfast(TM) 502 combines structural glazing and weatherseal applications into one product. Both neutral-cure, non-sag products bond to most substrates without priming, including vinyl, glass, aluminum, tile, fiberglass, and many plastic and painted surfaces.

This story is related to the following:
Chemical Processing and Waste Management
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Silicone Sealants | Adhesive Sealants | Window & Door Adhesives | Silicone Adhesives | Silicone Glazing Materials | Glazing Sealants