ThomasNet Industrial Newsroom -

Temperature Sensor meets JC42.4 JEDEC specification.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 02 Oct 2008 07:33:34 -0500

Model CAT6095 12-bit digital output temperature sensor provides ±1°C temperature sensing accuracy from +75 to +95°C and ±3°C accuracy from -20 to +125°C, across entire supply voltage range of 3.0-3.6 V. Suited for DDR3 memory module applications in high-speed PCs and laptops, environmental control systems, and industrial process control equipment, it is available in space-saving 2 x 3 x 0.55 mm height UDFN as well as standard 2 x 3 x 0.8 mm TDFN package.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
HVAC
Test and Measuring Instruments

Search for suppliers of: Digital Circuits | Application Specific Integrated Circuits (ASIC) | Temperature Sensors

Infrared Sensors measure temps from -20 to 500°C.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 30 Sep 2008 07:43:02 -0500

With response time of 240 msec, PyroEpsilon non-contact temperature sensors provide linear 4-20 mA output representing target temperature plus 4-20 mA input to control sensor's emissivity setting. Model PE21 has 2:1 optics making it suitable for applications where sensor can be mounted close to target, Model PE151 is designed for small/distant targets and has optical resolution of 15:1, while Model PE301 is intended for very small/distant targets and has optical resolution of 30:1.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments
HVAC

Search for suppliers of: Infrared Sensors | Non-Contact Sensors | Remote Sensors | Temperature Sensors

Electronic Hygrotherm prevents condensation in enclosures.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 23 Sep 2008 07:25:39 -0500

ETF012 series of electronic hygrotherm senses ambient temperature and relative humidity in enclosure with electrical/electronic components and turns on heater (or alternatively, fan) at either set point, helping prevent formation of condensation. Weighing approximately 7.1 oz, unit is equipped for 35 mm DIN rail mounting. LED integrated in adjustment knob on active controller is lit when connected device is in operation.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments
HVAC

Search for suppliers of: Humidity Sensors | Hygrothermographs | Temperature Sensors

Fiber Optic Temperature Sensor measures up to 1,000°C.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 09 Sep 2008 07:38:50 -0500

Based on chiral grating, which is fabricated by twisting or microforming fiber, Helica(TM) Temperature Sensor is designed for applications ranging from weld monitoring and control to turbine engine service and design. Sensing element is monolithic glass fiber and features sensitivity of 0.01 nm/°C, nominal. Probe length is 300 mm standard, sensor/grating length is 15 mm, and sensor placement is 25 mm from probe tip. Unit also features FC/APC connector type.

This story is related to the following:
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
HVAC
Test and Measuring Instruments
Welding Equipment and Supplies

Search for suppliers of: Fiber Optic Sensors | High Temperature Sensors | Weld Sensors

Temperature/Humidity Sensor features IP67 electronics.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Sep 2008 12:16:34 -0500

Optimized for use with SureCross Wireless Network, SureCross Temperature and Humidity Sensor provides relative humidity measurement with ±2% or ±3.5% accuracy (depending on model), temperature accuracy of ±0.3°C, and resolution of 0.1°C. Manufactured with rugged metal housing and IP67 electronics, it provides maintenance-free operation, and features serial sensor interface that enables unit to operate on FlexPower(TM) battery supply for up to 20 yr.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Temperature Sensors | Humidity Sensors

Temperature/RH Sensor includes wireless capabilities.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:42:45 -0500

SureCross(TM) Temperature and Humidity Sensor is factory-calibrated to determine relative humidity (RH) to ±2% or ±3.5%, depending on model, and temperature to ±0.3°C for critical data monitoring. Available with hydrophobic membrane filter and sintered stainless steel filter, product can be paired with node featuring integral battery supply or external power source. Node can be installed as stand-alone device or work in conjunction with SureCross Wireless Network gateway.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Humidity Sensors | Temperature Sensors

Sensor can be daisy chained for 64 temperature points.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 11 Aug 2008 07:46:14 -0500

Able to monitor temperatures between -55 to +75°C with ±0.5°C accuracy, daisyTemp comes with 5 ft sensor cable that can be extended using Ethernet cable with maximum total length of 500 ft. Up to 8 sensors can be stringed together and plugged into 1 securityProbe Intelligent Sensor port. Collected temperature values can be used to trigger alerts such as e-mail, SMS, phone calls, and SNMP traps.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Temperature Sensors | Monitor Sensors

Compact Pressure Sensor operates in harsh environments.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 28 Jul 2008 07:59:13 -0500

Designed for elevated temperature evaluations and R&D studies, Series 4007B comes in measuring ranges of 0-5 bar and 0-20 bar absolute from -40 to 200°C. It is 21 mm long and 6.2 mm in dia with integral cable, and has piezoresistive measuring element that measures static and dynamic events with high dynamic response. Available in a number of forms, including PiezoSmart® compatible with IEEE1451.4 TEDS standard, compact unit offers low sensitivity to acceleration and thermal error.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Measurement & Inspection Sensors | Pressure Sensors | Temperature Sensors | Temperature Measurement Equipment

Temperature Sensor resists moisture intrusion.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 28 Jul 2008 07:55:26 -0500

Designed for harsh environment of autoclave steam sterilizers, Model 3312B uses cable material that withstands moisture intrusion during pressure and vacuum cycling, and meets USP Class VI requirements for use in sanitary environments. Material has low memory and, thus, resists kinking. Available in variety of sheath and lead-wire jacket diameters, RTD comes in sharp-pointed version for insertion into rubber-capped vials, small bottles in tray washers, and sterile bags.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Resistance Temperature Sensors | Resistance Temperature Detectors (RTD)

RH/Temperature Sensors work over extended ambient range.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 24 Jul 2008 07:50:49 -0500

Fully interchangeable without recalibration, UPSICAP(TM) passive and active sensors measure ambient temperature from -90 to +85°C and relative humidity (RH) from 0-100% RH. Passive elements, which measure 9 x 8 mm, vary their capacitance with humidity and their resistance with temperature. MSS bi-face(TM) technology and 4-layer construction lends to reliability, as condensation and water immersion have no effect on accuracy or response time (0.25 sec).

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Humidity Sensors | Temperature Sensors

IR Temperature Sensors have dual output capability.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 Jul 2008 07:36:56 -0500

Available as 2- or 4-wire units, PyroCouple Series non-contact sensors can measure temperatures from -20 to 500°C with 240 msec response time. Two-wire sensors transmit target temperature as 4-20 mA output, while 4-wire units transmit target temperature as 0-50 mV or type J, K, or T thermocouple output plus internal sensor temperature as 4-20 mA output. Model PC21 has 2:1 optics, PC151 has optical resolution of 15:1, and PC301 is available with optical resolution of 30:1.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Infrared Sensors | Non-Contact Sensors | Optical Sensors | Temperature Sensors

Strain and Temperature Sensor has up to 40 km sensing range.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 10 Jul 2008 07:28:27 -0500

Foresight(TM) Fiber Optic Distributed Strain and Temperature Sensor (DSTS) uses Brillouin scattering in optical fibers to measure changes simultaneously in both temperature and strain along length of standard optical fiber, with spatial resolution as short as 5 cm. By wrapping or embedding a fiber inside any structure such as oil pipeline or dam, users can detect when that structure is being strained or heated/cooled and allow the problem to be corrected before failure occurs.

This story is related to the following:
HVAC
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Fiber Optic Sensors | Strain Sensors | Temperature Sensors

Wireless Sensors monitor temperature, light, and humidity.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Jul 2008 07:42:24 -0500

Suited for integration into Drop-in Networking applications or ZigBee networks, battery-powered XBee® Sensors allow users to collect real-time data from multiple nodes across ZigBee network. Units monitor combination of temperature and light or combination of temperature, humidity, and light. Using Python development environment that resides on ConnectPort(TM) X gateways, customers can monitor sensors for events and triggers and make decisions based on that information.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Wireless Sensors | Temperature Sensors | Light Sensors | Humidity Sensors

Pressure/Temperature Sensor is used with R744 refrigerant.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Jul 2008 07:38:37 -0500

Suited for mobile air conditioning systems, combined pressure & temperature sensor features operating pressure range of 0-150 bar with proof and burst pressure of 210 and 320 bar, respectively. Featuring TiON (Titanium OxyNitride) thin film technology, it has -40 to +180°C operating process media temperature range and -40°C to +135°C ambient operating temperature range. RoHS compliant, rugged, and vibration-resistant unit offers built-in reverse polarity and over-voltage protection.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Pressure Sensors | High Temperature Sensors | Sealed Environmental Sensors

OEM Pressure Sensor can handle pressure from 15-10,000 psig.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 30 Jun 2008 07:32:43 -0500

With resistance to vibration, shock, temperature variations, and RFI, Model PMP300 Pressure Sensor is suited for industrial and OEM pressure measurement applications. Available with ¼ NPT male and amplified 0-10 V 3-wire as standard, customizable units have signal output of 0-10 Vdc, and achieve accuracy of less than or equal to ±0.5% full scale. Stainless steel welded measuring cell eliminates need for soft sealing material that may deteriorate over time.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Pressure Sensors | Resistance Temperature Sensors

Air Density Trim System manages fuel/air ratio in burners.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 May 2008 07:54:31 -0500

Designed to sense combustion air temperature, Temp-A-Trim(TM) automatically varies burner fan speed to create constant mass airflow, maintaining optimal combustion efficiency in burner, regardless of combustion air temperature. System requires no special setup or programming. Compatible with linkage and linkage-less controls, Temp-A-Trim minimizes noise levels in boiler rooms as well as need for seasonal tuning of burners.

This story is related to the following:
Controls and Controllers
HVAC
Test and Measuring Instruments

Search for suppliers of: Temperature Sensors | Combustion Controls

Metal Sensor is offered in IP 69k rated washdown version.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 08 May 2008 07:40:06 -0500

With temperature rating from -40 to 100°C, uprox®+ Factor 1 sensors are resilient to high-pressure cleaning agents found in food and beverage and pharmaceutical industries. They incorporate 316 stainless steel construction and liquid crystal polymer front cap that resists moisture ingress. Units feature polypropylene cable jacket that stands up to harsh chemicals, and long sensing ranges for detecting all metals including non-ferrous metals at same rated distance.

This story is related to the following:
Test and Measuring Instruments
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: High Temperature Sensors

Press Fit Sensor analyzes melt and cavity temperature.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 May 2008 07:40:54 -0500

Able to analyze temperature variation inside mold cavity, Press Fit Cavity Temperature Sensor works in conjunction with eDART(TM) Process Control System to assist molders in diagnosing processing problems relating to temperature issues. Unit can be installed by drilling small hole for wire and flat bottomed pocket with tolerances necessary to press fit device in from cavity face. Placing sensors in different areas of part can show problems with non-uniform cooling.

This story is related to the following:
HVAC
Test and Measuring Instruments

Sensor measures temperature, humidity, and dew point.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Apr 2008 08:07:03 -0500

Featuring user-programmable alarm thresholds for T and RH%, EL-USB-RT USB-connected sensor can measure temperature from -10 to +60°C and 0-100% RH when plugged into USB port of PC installed with purpose designed software. PC displays temperature, humidity, and dew point in real-time and saves it to file that can store up to 7 days' worth of data. Software allows user to save data file permanently to hard drive and data can be graphed, printed, and exported to other applications.

This story is related to the following:
Computer Hardware and Peripherals
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Universal Serial Bus (USB) Connectors | Dewpoint Measurement Sensors | Humidity Sensors | Temperature Sensors

Thermal Flow Sensor can withstand explosive environment.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 11 Apr 2008 07:44:53 -0500

Featuring 9 mm SS tube, SS 23.400 ATEX3 Thermal Flow Sensor can measure flow velocity and detect direction of clean air and gas flow. It offers atmospheric pressure range of 700-1,300 hPa and power supply range of 12-24 Vdc. Including 2 switching outputs to indicate flow direction and limit value, microcontroller based unit provides serial interface that allows on-site programming via PC and adaptation of response time, threshold, and switching polarity to operation requirements.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Air Flow Sensors | Gas Sensors | Thermal Sensors