ThomasNet Industrial Newsroom -

Flow Sensor handles temperatures up to 350°C.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 12 Jun 2008 07:35:31 -0500

Offering measuring range of 0.2-20 m/sec, Model SS 20.60 HT provides digital and analog output and uses status indicator to display information about current flow velocity. Modular design enables sensor to be supplied with field bus interface. Able to measure free air and guided air in ducts from 25-1.000 mm, sensor is suited for mass flow control of combustion processes, burner control, flow measurement of process gases, and volume flow measurement of test stands.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Flow Sensors | Air Flow Sensors

Paddlewheel Flow Sensor has 1-1,000 Hz input frequency range.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 May 2008 07:33:36 -0500

With flow switch, multi-functional pulse divider, or 4-20 mA signal output options, FPB100 Series paddlewheel flow sensor is made of polypropylene or PVDF material, depending on model. Polypropylene models have titanium rotor pin and black PVDF rotor, while PVDF models feature PVDF rotor pin and natural PVDF rotor. CE compliant units offer built-in user interface that can be used to configure low flow, low power, and high resolution options.

This story is related to the following:
Test and Measuring Instruments
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Paddle Wheel Flowmeters | Flow Sensors

Thermal Flow Sensor can withstand explosive environment.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 11 Apr 2008 07:44:53 -0500

Featuring 9 mm SS tube, SS 23.400 ATEX3 Thermal Flow Sensor can measure flow velocity and detect direction of clean air and gas flow. It offers atmospheric pressure range of 700-1,300 hPa and power supply range of 12-24 Vdc. Including 2 switching outputs to indicate flow direction and limit value, microcontroller based unit provides serial interface that allows on-site programming via PC and adaptation of response time, threshold, and switching polarity to operation requirements.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Air Flow Sensors | Gas Sensors | Thermal Sensors

MEMS Flow Sensor suits HVAC air handling equipment.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Jan 2008 07:28:28 -0500

Model D6F-P MEMS Flow Sensor incorporates cyclone-type dust segregation system with bidirectional flow paths that generate cyclonic flows to separate dust particles from air using centrifugal forces. It offers flow range of +1.0 SLM, pressure range of +0.84 in. H<sub>2</sub>O, and output signal range of analog 0.5-2.5 Vdc, with 0-0.5 Vdc indicating negative flow. Measuring 17 x 37 x 27 mm, unit is available in PCB mountable and connector models.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
HVAC
Test and Measuring Instruments

Search for suppliers of: Air Flow Sensors

Loop-Powered Ultrasonic Sensors offer internal calculation.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 07 Jan 2008 07:07:55 -0500

With microprocessor control, LPU-2428 Ultrasonic Level Sensors internally perform volume, flow, and totalization calculations. IP65-rated products provide 1-25 ft detection range and have built-in formulas for various flumes and weirs. Products can also be used to determine distance and level, and equation-based calculations are also possible. With output range-dependant response times from 0.6-3 sec, sensors deliver 0.1 in. resolution and accuracy of ±0.25% of detected range.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
HVAC

Search for suppliers of: Ultrasonic Sensors | Liquid Level Sensors | Flow Sensors

Viscosity Sensor obtains lab-compatible results.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 10 Dec 2007 07:51:12 -0500

Suited for in-situ viscosity measurements, ViSmart(TM) sensors can correlate to data acquired from lab instrumentation for real-time, inline oil condition monitoring applications. Universal plug-n-play connectivity enables integration with and into other handheld products. Complimenting IR spectroscopy and other bulk property sensors, solid-state solution exhibits accuracy levels from 91-99% and provides instantaneous on-line viscosity and temperature data.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
HVAC

Search for suppliers of: Solid State Sensors | Flow Sensors

Insertion Flow Sensor features three output options.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 13 Feb 2007 06:50:04 -0500

Mounted into 2-48 in. pipe without system shutdown, Signet 2552 Metal Magmeter can measure flow in fluids containing particles, solids, and fibers. Design permits hot-tap access to pipe stream and is built of corrosion-resistant materials. Along with frequency, digital, and 4-20 mA output choices, sensor offers empty pipe detection and bidirectional flow capabilities as well as linearity of ±1% reading. Dynamic flow range is 0.15-33 fps, with repeatability of ±0.5% of reading at 25°C.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
HVAC

Search for suppliers of: Flow Sensors

Metal Magmeter permits hot-tap access to pipe stream.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 05 Feb 2007 07:04:53 -0500

Mounted in 2-48 in. pipes, Signet 2552 provides dynamic flow range of 0.15-33 fps with repeatability of ±0.5% of reading at 25°C. It uses corrosion-resistant materials, including 316 SS, PVDF, and FPM to ensure minimal maintenance. With no moving parts to wear, unit accurately measures flow in fluids containing high content of particles, solids, and fibers. Offering empty pipe detection and bi-directional flow capabilities, device provides frequency, digital, or 4-20 mA output.

This story is related to the following:
Test and Measuring Instruments
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
HVAC

Search for suppliers of: Insertion Flowmeters | Flow Sensors

Flow Sensor monitors laminar flow in cleanrooms.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 23 Jan 2007 07:09:13 -0500

Based on thermal anemometer, Model SS 20.415 measures flow velocity in 2 directions and detects flow direction. Housing consists of 9 mm dia stainless steel pipe that contains all electronics and can be sterilized during operation with alcohol or hydrogen peroxide. Unit offers measuring ranges of 1 or 2.5 m/s and starts measuring from velocity of 0.05 m/s. Equipped with Cleanroom Quick Mounting System, sensor provides outputs of 0-2, 0-5, and 0-10 V as well as 0-20 and 4-20 mA.

This story is related to the following:
Test and Measuring Instruments
Laboratory and Research Supplies and Equipment
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Laminar Flowmeters | Laminar Flow Cleanroom Equipment | Flow Sensors

Air and Gas Flow Sensor has 200 m/s measuring range.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Jan 2007 07:55:12 -0500

Featuring 1:1,000 turn-down ratio, SS 20.60 immersion-style sensor incorporates media-resistant sensor tip and modular design that allows for selection of analog, Profibus-DP, or Device-Net interface. Calibration accuracy is 1% of measuring value, and max operating pressure is 230 psig. Compact sensor with attached transformer measures air, nitrogen, CO2, and other gases and can be used in 1-40 in. tubes.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Flow Sensors | Air Flow Sensors

Level Sensor tracks inventory in smaller tanks and silos.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 18 Oct 2006 07:50:08 -0500

Used in vessels as deep as 30 ft, SmartBob-TS1 can be used to start or stop machinery instantly when product reaches specified level or show whether product is flowing freely. It is unaffected by airborne dust, filling noise, steam, temperature, or measured material's characteristics. When dropped to material surface level, sensor immediately retracts to ensure minimal contact; verifying measurement is taken during ascent.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Controls and Controllers

Search for suppliers of: Flow Sensors

Flow Sensors utilize paddlewheel technology.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 27 Jun 2006 08:06:25 -0500

Suited for fluids ranging from ultrapure water to harsh reagents, Signet 2537 Series blind flow sensors are available with polypropylene or natural PVDF body materials and install in pipe sizes from 0.5-0.8 in. Units offer flow range of 0.3-20 fps, repeatable output of ±0.5% of max range at 77°F, and input frequency of 1-1,000 Hz. Output options include digital S3L data link or 4-20 mA, dry contact or solid state pulse divider, or dry contact or solid state flow switch.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
HVAC

Search for suppliers of: Flow Sensors

Flow Sensor suits sanitary and hygienic applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 22 Mar 2006 07:03:22 -0500

OPTIFLUX 6000 electromagnetic flow sensor features conductivity of greater than 1 µS/cm for non-water and greater than 20 µS/cm for water. It offers cleaning temperature up to 300°F, and with IFC 300 flow converter, provides continuous information on flowmeter state, measurement, and notification of unnoticed application faults. Featuring SS construction, mesh support, and L-shaped gasket design, 3A Sanitary approved product maintains shape through all operating conditions.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Flow Sensors

Flow Sensors measure gases from 0-50 to 0-500 l/min.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 07 Mar 2006 07:06:35 -0500

Featuring patented thermal mass flow sensor design, Series 209 Mass FLO-SENSORS minimize zero drift while maintaining linear outputs. Aluminum units include NPT ports and analog output for remote data monitoring. They are suitable for variety of industrial, commercial, laboratory, and OEM applications, including furnace flow control, online gas blending, regulation of sample gas streams, and precise gas injection systems.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Flow Sensors

Candlestick Sensor measures temperature and air velocity.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 Dec 2005 07:08:26 -0500

Designed to characterize thermal conditions in electronic systems, Model MS 1000-CS-WC provides temperature measurements from -30 to +150°C, ±1°C and velocity measurements from 0-51 m/s, ±2%. Unit features 9.5 mm diameter base and comes in heights of 9, 12, and 20 mm. Narrow, low-profile design minimizes disturbance of heat flow in test domain, while plastic-sleeved stem facilitates installation and repositioning during testing process.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Velocimeters | Velocity Sensors | Temperature Sensors | Air Flow Sensors

Averaging Flow Sensor measures differential pressure.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 11 Nov 2005 07:06:09 -0500

Designed for long-term performance, Series SSS-1000 senses differential pressure of variable air volume terminal units, fan terminal units, and individual zones in HVAC systems. It is available with 1-4 sensing points and in lengths from 3 5/32-9 29/32 in. to accommodate box size diameters from 4-20 in. All units include 3/8 in. polyethylene tubing.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Differential Pressure Flowmeters | Flow Sensors

Flow Sensor works in fluids with particulates.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 17 Aug 2005 11:00:47 -0500

Suited for conductive fluid applications that contain particles, solids, and fibers, Signet 2551 Magmeter has no moving parts and can connect to other instrumentation via frequency or digital (S3L) signal output or 4-20 mA output option. Insertion style electro-magnetic flow sensor features stainless steel electrodes, PVDF or PP body, and 2-wire system design. Mounted into 0.5-0.8 in. pipes, unit has 0.15-33 fps flow range with repeatability of ±0.5% of reading.

This story is related to the following:
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
HVAC

Search for suppliers of: Flow Sensors

Acoustic Sensor features European ATEX II 3D approval.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Jul 2005 07:33:05 -0500

Used for continuous solids flow detection, SITRANS AS 100 is certified for use in hazardous areas and conditions where explosive dust may be present. It detects changes in high-frequency, structure borne sound waves from equipment and materials in motion, reacting instantly to changes in solids flow to warn of blockages, product absence, or equipment failure. Unit features 0-10 Vdc analog output, which works with SITRANS CU 02 controller or user's PLC.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Flow Sensors | Acoustic Sensors

Contactless Fluid Sensor works with tubes up to 0.25 in. OD.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 30 Jun 2005 08:19:57 -0500

Infrared optoelectronic sensors in OPB350 Series use IR LED/phototransistor pair to determine difference in refractive properties between full and empty tubing as it passes through housing. Able to accommodate clear tubing with ODs of 0.125, 0.187, and 0.25 in., products have plastic housing that features connection mechanism to PCB. Sensor creates output signal that can describe multiple output states: fluid present, no fluid present, or no tube present.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Infrared Sensors | Liquid Sensors | Flow Sensors

Fully Programmable Sensor monitors flow and temperature.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 06 Jun 2005 07:41:30 -0500

Self-contained Digital Read Out flow sensor operates on calorimetric principle and features solid-state construction with 316 stainless steel wetted parts. Along with 3-digit display, unit provides adjustable on and off delay feature, programmable set points, and adjustable filter. In-line-mounted unit, available with transistor, relay, or analog output, monitors changes in flow between 0.2 and 12 gpm. It operates with fluids such as water and glycol.

This story is related to the following:
HVAC
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Flow Sensors | Temperature Sensors