ThomasNet Industrial Newsroom -

Wireless Solution conserves energy in HVAC environments.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 24 Jun 2008 07:35:42 -0500

Retrofitting to existing infrastructures, MeshScape® 6424 Wi-Stat II wirelessly integrates multiple sensors and control actuators to optimize energy consumption and comfort within each zone in commercial and industrial HVAC environments. It utilizes 802.15.4 unlicensed radio band and operates bi-directionally within wireless sensor network for intelligent control action. Connecting to existing HVAC wires for power, system replaces existing analog, digital, and/or pneumatic thermostat.

This story is related to the following:
HVAC
Controls and Controllers

Search for suppliers of: HVAC Controls

Thermal Controllers suit military electronics applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 26 Mar 2008 07:45:42 -0500

Ruggedized to meet both Mil-STD-461 and Mil-STD 810F testing requirements, fully configurable Thermal Controllers leverage proprietary software allowing for programmable alarm thresholds and fan curves. On-board microcontroller monitors and controls fan speeds, communicates with host through serial interfaces, measures temperatures, detects filter blockages, and reports alarms.

This story is related to the following:
Controls and Controllers
HVAC

Search for suppliers of: Temperature Controllers

Energy Management Platform utilizes intelligent devices.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 31 Jan 2008 07:33:17 -0500

Uniphy(TM) energy management platform delivers comprehensive monitoring and control of Internet-enabled network thermostats and intelligent thermal management devices in geographically dispersed facilities. Systems leverage internet resources to deliver scalable remote monitoring, and are suitable for residential, educational, and light commercial applications. UniVista(TM) software is included for configuring, storing, and implementing device settings.

This story is related to the following:
HVAC

Search for suppliers of: Remote Monitoring & Reporting Energy Management Systems | Energy Management Systems | HVAC Energy Management Controls

HVAC Electronic Bypass provides back-up motor control.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 29 Jan 2008 07:30:28 -0500

Designed for HVAC industry, E-Clipse Bypass communicates over 45 individual points of data to Building Automation System master controller. Unit is available in UL Type 1, UL Type 12, or NEMA 3R enclosure, and integrates with ACH DriveIT Low Voltage 550 adjustable-speed ac drives. Dual switch design ensures uninterrupted operation since motor/load never needs to go offline. Bypass comes equipped with Modbus RTU, Johnson Controls N2, Siemens FLN, and BACnet communications protocols.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors
HVAC

Search for suppliers of: Motor Drives | HVAC Controls

Flow Controller creates stable air pressure.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 23 Jan 2008 07:45:34 -0500

Available for system capacities from 250-6,200 scfm, Kaeser Flow Controller (KFC) promotes effective storage by accumulating compressed air in receivers and only delivering air needed for production. Controller is designed for effective response to fluctuating demand and actively maintains constant system pressure downstream. Stored compressed air can also be used to satisfy air demand spikes without pressure drop at point of use.

This story is related to the following:
HVAC
Controls and Controllers

Search for suppliers of: Air Flow Controls | Air Flow Controllers

Thermal Controller is ATCA-compliant.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 Jan 2008 07:35:43 -0500

Used with engineered thermal solutions for electronic equipment, ATCA-compliant dual IPMI bus fan tray controller offers multiple filter clog and maintenance schemes as well as fan failure prediction and monitoring. Real-time selection of fan tray mode enables synchronized, closed-loop control of RPMs. Controller also offers real-time IPMI-based configuration of alarm thresholds and fan control curve set points as well as access to fan speeds, PWM values, and CLEI code data.

This story is related to the following:
Controls and Controllers
HVAC

Search for suppliers of: Temperature Controllers | Fan Controls

Head Pressure Controls are Pb-free and RoHS-compliant.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 06 Dec 2007 07:44:08 -0500

Used to protect AC/refrigeration systems, models ICM325/326/327HN are temperature-sensitive, motor fan speed controls that regulate head pressure by varying amount of airflow through condenser. Products run motor fan consistently at lower speed, rather than cycling it on or off, and continuously make any necessary temperature adjustments. Suited for temperature- and humidity-sensitive environments, each model can control up to 3 refrigerant circuits.

This story is related to the following:
Controls and Controllers
HVAC

Search for suppliers of: Speed Controls | Fan Controls

Heating Control Systems offer plug-and-play functionality.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 19 Nov 2007 07:46:56 -0500

Preconfigured for end-user's specific application, Hot Air Process Heating Control Systems include programmable PLCs that support multiple heat zones with independently controlled heaters and/or blowers. Turnkey systems offer redundant safety interlocks as well as counters, timers, variable airflow speeds, and recipes. Able to accommodate various heat sources and interface with other controllers, systems are designed to integrate with existing production and packaging applications.

This story is related to the following:
Controls and Controllers
HVAC

Search for suppliers of: Electric Heat Controls | Heat Controls

Fan Speed Control and Alarm promotes fan life and safety.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 24 Sep 2007 08:07:10 -0500

SmartFan Fusion-9 controls speed for up to 9 fans based on temperature, single- or dual-I2C interface, or analog control signal (PWM, 5.0 Vdc). Digital unit offers ATCA compliance for managed or intelligent FRU cooling systems and meets telecommunication industry's open standard for carrier-grade systems by communicating with shelf management modules via dual IPMBs. Control provides FRU information, individual fan status, and temperature readings.

This story is related to the following:
Controls and Controllers
HVAC

Search for suppliers of: Speed Controls | Fan Controls

Ionizer offers ESD control in process tool applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 20 Aug 2007 07:46:17 -0500

Maintaining ion balance of less than ±1 V or better with external monitor and less than ±3 V without, Ion Systems Critical Environment In-tool Ionizing Blower Model 5822i is suited for ESD control in process tools used in hard disk drive, backend semiconductor, and other automated manufacturing environments. It features internal automatic balance correction system, collimator, separate control box, and Hydro Wave bearing fan facility monitoring system connection.

This story is related to the following:
HVAC
Materials and Material Processing

Search for suppliers of: Blower Controls | Ionizing Air Blowers | Ionizers

Fan Speed Control and Alarm is designed for 12 Vdc fans.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 04 Jun 2007 07:44:15 -0500

Measuring 1.5 x 5 in., SmartFan Vortex I2C fan speed control is compatible with fans that offer open collector or voltage source tach pulses, and monitors tach pulses from up to 4 fans with maximum current rating of 5 A at 55°C or less. It accepts fan speed commands (including on/off) and gives individual pass/fail fan status via I2C interface. Fan speed can also be based on temperature. I2C interface provides temperature readings from on-board thermistor and EEPROM storage.

This story is related to the following:
HVAC
Controls and Controllers

Heating Products deliver instant hot water to every faucet.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 24 Oct 2006 07:51:02 -0500

Capable of saving households up to 15,000 gal of water per year, Autocirc® and UltraCirc® hot water circulation pumps bring hot water instantly to faucets and showers. Autocirc is geared for retrofit applications, while UltraCirc is designed for new construction. Both systems integrate with existing hot water supply line and can be installed by DIYs or plumbers. UltraCirc compact recirculation system includes timer-controlled pump and several valves.

This story is related to the following:
HVAC
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Controls and Controllers

Search for suppliers of: Pressurized Water Heating Systems | Hot Water Pumps | Hot Water Temperature Controls

Controller helps manufacturers cut energy usage.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Sep 2006 07:40:27 -0500

Suitable for batch processes in manufacturing plants, Furnace Energy Optimization solution is based on independently validated algorithm within LIN control environment, which calculates derivative of power required to heat furnace. When derivative is 0, steady state has been reached where power input is equal to furnace losses. Ability to pinpoint exact moment when center of load and piece parts reach required temperature allows cycle time to be optimized.

This story is related to the following:
Controls and Controllers
HVAC

Search for suppliers of: Temperature Controllers | Furnace Controls

Zone Controllers suit fan coil and heat pump applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 27 Apr 2006 06:32:47 -0500

Fan coil version of Xenta 121 can be used in 2- and 4-pipe installations and configured for use with variety of valve actuators, while heat pump model handles reversing and isolation valves and can be configured for up to 3 compressors. Demand-based, multifunctional fan control program handles multistage and variable speed fans for optimal comfort. Exception Modes allow users to pre-configure different modes to override normal control in case of specific event.

This story is related to the following:
Controls and Controllers
HVAC

Search for suppliers of: Fan Controls | Heat Pump Controls

A/C Motor Control Platform enables efficiencies to 95%.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 29 Mar 2006 07:05:09 -0500

As integrated power design platform, iMOTION(TM) enables variable-speed sinusoidal current control without position sensors for smooth torque output and minimal acoustic noise in motors. Optimized system architecture combines application-specific HVICs, PFC, discrete trench IGBTs, mixed-signal analog chip sets, and power stages. It also features digital control algorithms for motor control applications using dc link phase current sensing.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
HVAC

Search for suppliers of: Hardware Product Development & Prototypes | Air Conditioning Controls

Water Heater Control Module features LED display.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 29 Mar 2006 07:05:06 -0500

Cem-Trol(TM) Solid State Water Heater Control Module combines temperature control and limit functions for Cemline packaged steam and boiler water fired water heaters into single control module. Controller features on board operating PID temperature control, high temperature safety cut offs, and alarm indications.

This story is related to the following:
HVAC
Controls and Controllers

Search for suppliers of: Heater Temperature Controls

Fume Hood provides minimum turbulence.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Jan 2006 07:03:34 -0500

UniFlow SE Fume Hood utilizes aerodynamic face opening with airfoil to provide uniform and constant volume airflow into fume chamber. VaraFlow baffle system directs airflow to exhaust outlet with minimum turbulence. Featuring one-piece, unitized composite fiberglass superstructure, hood is fire retardant and chemical resistant. Units are available in 48, 60, 72, and 96 in. width, and 32 in. depth x 59 in. height.

This story is related to the following:
HVAC
Laboratory and Research Supplies and Equipment

Search for suppliers of: Laboratory Equipment & Supplies | Fume Hoods | Exhaust Hoods | Fume Hood Control Systems

Multi-Channel Controller measures energy/power consumption.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 Dec 2005 07:08:27 -0500

Designed to perform as all-in-one controller or function as transmitter for multiple parameters, Signet 8900 allows mixing and matching of up to 6 sensor types including flow, pH, ORP, conductivity/resistivity, pressure, temperature, and level. For HVAC applications, BTU calculator can execute heating and cooling, 2 cooling, or 2 heating functions simultaneously. It also allows user-selection of up to 9 heating and cooling totalizer units and up to 6 power units.

This story is related to the following:
HVAC
Controls and Controllers

Search for suppliers of: Power Controllers

Heater Control Banks operate multiple heating zones.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 10 May 2005 07:47:51 -0500

HBC-EZ series features pre-installed controller wiring harness for single-phase, 3-phase/2-pole, or 3-phase/3-pole applications. Relays offer zero cross-switching, max output of 6 A/pole at 40°C ambient temperature, and input control voltage range of 4-15 Vdc for dc model and 90-140 Vrms for ac model. Mounted on DIN rail clip and measuring 3 x 9 in., controls are suited for use in plastics molding, semiconductor manufacturing, medical, and food processing equipment.

This story is related to the following:
Controls and Controllers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
HVAC

Search for suppliers of: Control Relays | DIN Rail Mountable Relays | Heat Controls | Oven Controls | Heater Temperature Controls

Electric Actuator modulates loads up to 8,000 lb-ft.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 02 May 2005 07:50:26 -0500

Suited for large fan dampers typical of utility FD and ID applications, Group 22 Control Drive provides positioning of final control elements with resolution down to 0.1% of span. It is fully enclosed in weatherproof housing rated for service environments from -40 to +185°F. On-board control module feeds drive's motor windings directly, eliminating external motor starters and controls. Drive does not coast or overshoot, and will not overheat under continuous modulation.

This story is related to the following:
Controls and Controllers
HVAC
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Drive Components | Electric Controls | Fan Controls | Positioning Controls | Electric Linear Actuators