ThomasNet Industrial Newsroom -

Baghouse Dust Collectors feature PowerCore filter packs.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 11 Sep 2008 07:34:19 -0500

Available in stand-alone and bin vent configurations, Torit PowerCore® dust collectors can capture both large and small dust particles in wood, grain, cement, and plastics manufacturing operations. Measuring 7 in. long and combining Ultra-Web® surface-loading technology with fluted-media design, single PowerCore filter pack can replace 6 traditional 8 ft long fabric filter bags and can be removed from clean side of collector with one hand in minutes without using tools.

This story is related to the following:
HVAC
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Dust Collectors | Dust Filtering Systems | Dust Collecting Filters | Dust Collecting Systems

Hybrid Membrane Fiber targets air filtration bags.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 Apr 2008 07:51:39 -0500

Based on nanofiber science, Hybrid Membrane Technology Fiber is produced using spinning process that delivers continuous filaments with diameters from 200-600 nm. Incumbent polyester felt bags are commonly used at production facilities that generate particulates and dust from wood, cement, asphalt, paint, minerals, and powders. HMT also adds breathability and protection to bedding products as well as energy storage.

This story is related to the following:
HVAC

Search for suppliers of: Dust Collector Bags | Air Filtration Equipment & Systems

Dust Control Unit minimizes safety hazards in plants.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 Apr 2008 07:36:11 -0500

Unimaster dust control unit is suited for range of nuisance dust problems encountered during industrial processes. Contaminated air is drawn through inlet to filter by fan, with heavier dust particles falling into collection bin or hopper and finer dusts carried up to flat envelope shaped, multipad filter. When fan is switched off, filter fabric cleaning cycle is automatically activated and dust is dislodged by oscillating motion of shaker motor.

This story is related to the following:
HVAC

Search for suppliers of: Dust Control Equipment | Dust Collecting Systems

Dust Collectors eliminate OSHA confined space entry hazard.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 25 Feb 2008 07:51:11 -0500

By eliminating need for workers to enter dust collector at equipment design stage, PAC Sonic Jet Dust Collectors safeguard workers from exposure to potentially harmful situations while eliminating concern for compliance with OSHA's 29 CFR 1910.146. Front loading filter cartridge array enables filter inspection and replacement to be performed by one person from outside unit with no tools. Featuring modular design, collectors come in 7 models with capacities from 12-64 filters.

This story is related to the following:
HVAC

Search for suppliers of: Dust Collectors

Plastic Dust Collector Bags facilitate shop clean-up.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 05 Feb 2008 07:55:18 -0500

Designed to withstand constant use, disposable polybags fit dust collectors from various OEMs - Delta, Dustek, Grizzly, Jet - and save time by eliminating repeated dumping. These heavy-duty plastic collection bags come in rolls of 50, measure 6 mil thick, and are available in 2 sizes: 21 in. dia x 50 in. long and 24.5 in. dia x 72 in. long.

This story is related to the following:
HVAC
Material Handling and Storage

Search for suppliers of: Dust Collector Bags | Plastic Bags

Dust Collector suits pressure-blast cabinets.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 23 Jan 2008 07:45:27 -0500

With 3 hp blower and non-ferrous 3,450 rpm impeller, cartridge-type Model D1000 extracts adjustable 1,000 cu-ft of air/min. Unit is fabricated in continuously welded 12-gauge steel plate with overall dimensions of 112 x 40 x 50 in. Two pleated paper cartridges each have filter area of 226 sq ft and provide average efficiency of 99.99% for particles of 0.5 micron or larger. Automatic pulse jet cleaning of filter cartridges is microprocessor controlled.

This story is related to the following:
HVAC
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Blast Cleaning Equipment | Dust Collectors

Cyclone Dust Collectors feature storage hopper.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 Nov 2007 07:41:13 -0500

Available in 7 models from 1,500-12,000 cfm and 2-50 hp, Cyclone Dust Collectors centrifugally separate dust and chips from air stream, exceeding 99% efficiency by weight for wood dust and waste from steel grinding. Storage hopper, with capacity of 105 cu-ft, features 24 in. square rack and pinion slide gate with hand wheel or pull chain operator. It is suited for wood or plastic waste storage and enables gravity transfer into pick-up truck or garbage container.

This story is related to the following:
HVAC

Search for suppliers of: Cyclone Dust Collectors

Dust Vacuums offer clog free filtering.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 26 Oct 2007 07:43:56 -0500

CDCLarue(TM) Series of dust vacuums have fully automatic non-clogging filtration system that internally flushes filters clear during operation using only vacuum and ambient air. PTFE coated S.B.P. twist on filters eliminates dust particles as small as .1 micron. Features include steel dolly that has five 3 in. non-marking, conductive caster wheels, two handles that assist in dumping and moving tank, and microprocessors in PC Board that are designed for Pulse-Bac® filtration system.

This story is related to the following:
Chemical Processing and Waste Management
HVAC

Search for suppliers of: Dust Filtering Systems | Vacuum Systems

Reverse Air Dust Collectors filter 4,500-70,000 acfm.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 04 Sep 2007 08:16:10 -0500

RAC Series Reverse Air Collectors removes accumulated dust from filter bags without requiring compressed air. They feature internal blower and heavy duty ¾ hp explosionproof gear drive motor to move cleaning arm. High-velocity nozzles direct air for continuous cleaning of each filter bag on every rotation. System also features walk-in clean air plenum, 10 ga carbon steel construction, snap band top load filter bags, and heavy duty 12-wire cages made of 11 ga galvanized wire.

This story is related to the following:
HVAC

Search for suppliers of: Reverse Air Dust Collectors

Dust Collector offers downdraft velocity of up to 100 fpm.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 11 Jul 2007 07:51:05 -0500

With air volumes up to 2,500 cfm, Model SDB captures smoke, dust, and powders resulting from operations such as grinding, polishing, hand sanding, and dry buffing. System features 80 x 55 in. grated work surface that can accommodate loads up to 75 lb/sq-ft. It automatically self-cleans when pulses of compressed air dislodge dust from filters upon shutdown. By drawing particles and contaminants away from worker's breathing zone, SDB help companies comply with OSHA regulations.

This story is related to the following:
HVAC

Search for suppliers of: Down Flow Dust Collectors

Wet Type Dust Collector suits metal finishing operations.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 30 Apr 2007 08:02:01 -0500

ProScrub, constructed of 12 gauge sheet steel or stainless steel, uses current technology to scrub dust laden air stream with water. Unit comes with direct connected, C-face integral motor and fan assembly, NEMA 1 start/stop motor controls with overload protection, automatic water level control, lexan window and water fill line, and sludge monitoring and final stage mist eliminator filtration pack. It has no internal filtration mechanisms or additional pump hardware.

This story is related to the following:
Chemical Processing and Waste Management
HVAC
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Steel Sheet Scrubbing Machinery | Dust Scrubbers | Wet Scrubbers | Dust Collecting Systems | Wet Dust Collectors

Compact Dust Collector suits large-capacity applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 06 Apr 2007 07:46:09 -0500

Capable of 1,000 cfm performance, Model RP-1 Twister(TM) features cartridge collection with cyclonic drop-out design and quiet 72 DBA operation. Product uses 99.999% efficient fire retardant cartridge filter and measures 18.5 in. in diameter and 63.5 in. high. Roto-Pulse(TM) cartridge cleaning system, included, cleans 100% of cartridge area to promote efficient dust collection. Options include 100% spunbound polyester washable filter and wall-mount kit.

This story is related to the following:
HVAC

Search for suppliers of: Dust Collecting Systems | Cyclone Dust Collectors | Cartridge Dust Collectors

Dust Collector targets light-duty industrial facilities.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 21 Feb 2007 07:34:39 -0500

ArrestAll AR Series self-contained shaker-type dust collector is painted inside and out with powder-coat finish for corrosion-resistance. Featuring hinged side-access door with single access and self-aligning locking mechanism, device includes fan, motor, filter envelope, and automatic shaker unit. Shaker control allows for time and fan coast adjustments from 0.6-60 sec. ArrestAll filter is available with standard 16 pocket or extra wide 8 pocket spacing.

This story is related to the following:
HVAC

Search for suppliers of: Shaker Type Dust Collectors | Dust Collecting Systems

Filtration/Containment System features modular design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 21 Feb 2007 07:34:38 -0500

Equipped with self-cleaning HEPA filter, Cephir safely removes and contains high volumes of extremely fine dust particulates from exhaust air of production machines in variety of industries. Measuring 40 x 30 x 90 in., unit features parallel swing doors, pull-out control cabinet, and bag-in bag-out filter exchange. It also includes control interface MES/SCADA system, filter cassette with leak test gasket, and blower with variable frequency drive.

This story is related to the following:
HVAC

Search for suppliers of: Air Filtration Equipment & Systems | Dust Containment Systems

Dust Collector generates over 850 cfm.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 08 Nov 2006 07:49:11 -0500

Pulse-Bac® PB2500X is equipped with Pulse-Bac Technology, which automatically cleans filters and prevents clogging. Screw on-off filter with PTFE coating facilitates filter replacement. Dust extraction feature eliminates contact with debris and allows user to extract containments and discard them without turning off vacuum or stopping production. When attached to large surface preparation equipment, PB2500X operates virtually dust-free for any surface application.

This story is related to the following:
Cleaning Products and Equipment
HVAC

Search for suppliers of: Dust Collectors | Cleaning Equipment

Dust Collector delivers up to 450 cfm.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 08 Nov 2006 07:49:11 -0500

Suited for surface preparation applications, Pulse-Bac® PB1500X is equipped with Pulse-Bac Technology, which automatically cleans filters and prevents clogging. Dust extraction feature eliminates contact with debris and allows user to extract containments and discard them without turning off vacuum or stopping production. Screw on-off filter with PTFE coating facilitates filter replacement, while ergonomically designed cart let users maneuver in and around job sites.

This story is related to the following:
Cleaning Products and Equipment
HVAC

Search for suppliers of: Dust Collectors | Cleaning Equipment

Dust Collector is suitable for industrial cabinet blasting.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Oct 2006 07:42:10 -0500

With nonferrous blower assembly powered by 1.5 hp TEFC motor, Model D500 cartridge-type dust collector generates air extraction of 500 Cfm. Measuring 202 x 58 x 87 cm, unit features flame retardant pleated paper filter cartridge and purges dust by reverse pulse cleaning system. Color-coded manometer gauge displays pressure differential between clean and dusty sides of filter while dial-faced butterfly blast gate adjusts airflow.

This story is related to the following:
HVAC

Search for suppliers of: Reverse Air Dust Collectors | Pulse Jet Dust Collectors | Cartridge Dust Collectors

Mobile Filtration Unit cleans up fumes.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 26 Oct 2006 07:45:32 -0500

Suited for welding workshops and industrial settings, Farr Cart extracts moderate concentrations of smoke and light dust generated by intermittent processes such as welding and grinding, delivering 99+ efficiency on welding fume. Unit features injection-molded plastic construction, large rubber wheels, and slim design, offering mobility in tight spaces. Handles come with 10 ft flexible fume extraction arm and built-in halogen spotlight in hood.

This story is related to the following:
Chemical Processing and Waste Management
HVAC
Welding Equipment and Supplies

Search for suppliers of: Dust Filtering Systems | Filtration Systems | Fume Extraction Systems | Smoke Extraction Systems

Cartridge Dust Collectors come in 3 configurations.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 03 Oct 2006 07:42:17 -0500

Available as portable system (VP), downdraft bench (VB), and self-contained unit (VF), V Series captures contaminants at source with parabolic swing arm, downdraft table, or ducted inlet respectively. Series works in processes such as metalworking, grinding, blending, filling, and packaging. Available with selection of filters, products remove contaminants from air and return clean air to work area. Features include automatic filter cleaning cycle and quiet (below 82 dBa) operation.

This story is related to the following:
HVAC

Search for suppliers of: Dust Collecting Systems | Dust Collectors | Cartridge Dust Collectors

Dust Collectors are designed for wood production facilities.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 27 Sep 2006 07:43:28 -0500

Non-powered enclosure-less dust collectors come in variety of sizes up to 1,000 sq ft of filter area and are suitable for 800-20,000 cfm. Dust removal drawers, hopper style dust catches, and manual/electric/pneumatic shakers are available as options. Applications include machine shops, buffing/polishing operations, composite manufacturing, and transportation maintenance.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
HVAC

Search for suppliers of: Dust Collectors