ThomasNet Industrial Newsroom -

Fire Smoke Dampers are designed for easy access.

info@productnews.com (ThomasNet News) — Fri, 30 Oct 2009 08:45:08 -0500

Models GFSD-211 and GFSD-212 are out-of-wall combination fire smoke dampers designed for easy access throughe grille to the damper, closure device, and actuator. Separate compartment houses actuator, allowing for shallow operating depth of 13.5 in. Both models are qualified to velocities up to 2,000 fpm and pressure ratings up to 4 inches wg. Models GFSD-211 and GFSD-212 are available in vertical or horizontal mounts with a maximum size of 48 x 48 in.

This story is related to the following:
HVAC

Search for suppliers of: Fire Dampers | Ventilation System Dampers | Dampers

Round Dampers feature A-60 fire rating.

info@productnews.com (ThomasNet News) — Fri, 09 Oct 2009 10:05:55 -0500

Made of stainless steel, 700-A60R Series ranges from 12-36 in. in diameter and is available with electric or pneumatic actuation. Fully automatic units meet all requirements in accordance with IMO FTP Code, Annex 1, Part 3. Under terms of US-EC Mutual Recognition Agreements on Marine Equipment, 700-A60R line has also earned European Wheelmark of conformity.

This story is related to the following:
HVAC

Search for suppliers of: Electrically Operated Dampers | Fire Dampers

Slip Joints/Weld-On Hinges suit removable door applications.

info@productnews.com (ThomasNet News) — Tue, 29 Sep 2009 08:30:40 -0500

Allowing instant access to cabinet interior, Slip Joints comes in various sizes from 1 ½ to 3 in. long and 1 7/16 to 3 in. open width, with either blank leaves or standard hole patterns. Offering alternative to continuous, butt, or slip hinges, Weld-On Hinges have no leaves or fasteners to remove. They come in 12 sizes with options for fixed pin, fixed pin with grease fitting, or removable pin. All removable hinges are available in stainless, steel, and aluminum.

This story is related to the following:
Controls and Controllers
HVAC
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Transportation Industry Products Sponsored by: Terra Environmental Technologies, A Terra Industries Co. - Untitled

Search for suppliers of: Motion Control Dampers | Hinge Springs | Gas Springs | Stainless Steel Gas Springs | Locking Gas Springs | Tension Gas Springs | Non-Locking Gas Springs | Marine Gas Springs | Nitrogen Gas Springs

Iris Damper offers capacities to 20,000 cfm.

info@productnews.com (ThomasNet News) — Mon, 31 Aug 2009 08:35:46 -0500

Available in 10 sizes from 4-32 in., IRIS Damper permits airflow to be adjusted and measured in one location. Unit uses interlocking steel plates and calibrated control lever to form adjustable aperture. By measuring differential pressure across pressure ports, and referring to matching performance curve, airflow can be precisely determined. Manufactured of galvanized steel, damper is fitted with neoprene gasket for airtight mounting.

This story is related to the following:
HVAC

Search for suppliers of: Iris Dampers

Abort Gate increases dust collection equipment safety.

info@productnews.com (ThomasNet News) — Wed, 03 Jun 2009 08:28:52 -0500

Featuring heavy-duty, fully welded steel construction and OSHA safety yellow paint, High Speed Abort Gate can be located prior to inlet of dust collection system to prevent ingress of flame or burning ember. It can be actuated by leak detection or broken bag sensors and may also be placed on return air side of dust collector to redirect contaminated air to safe location. Other features include gate accelerating springs; fail-safe electro-magnets; steel gate seals; and limit switches.

This story is related to the following:
HVAC

Search for suppliers of: Dust Control Equipment | Summer/Winter Damper Abort Gates

Backdraft Dampers are rated for velocities up to 2,000 fpm.

info@productnews.com (ThomasNet News) — Thu, 07 May 2009 08:29:37 -0500

Round backdraft damper Model WDR-53 features galvanized steel frame with aluminum blade, while Model SSWDR-53 is constructed with 304 stainless steel frame and blade. They can be installed horizontally for vertical up/down airflow or mounted vertically for horizontal airflow, and offer pressures up to 2 in. wg in diameter sizes from 4-24 in. Both models are available with optional top frame extension.

This story is related to the following:
HVAC

Search for suppliers of: Backdraft Dampers

Hydraulic Dampers feature single or double acting design.

info@productnews.com (ThomasNet News) — Fri, 01 Aug 2008 07:51:05 -0500

Offering 250,000+ cycle life, self-contained hydraulic dampers feature body diameters ranging from 15-40 mm, stroke lengths of up to 800 mm, and adjustable travel speed that remains constant throughout stroke. Variety of end fittings and mounting brackets are available for installation. Units are suited for medical, defense, packaging, bottling, printing, fitness equipment, transportation, lawn equipment, furniture, RV, and amusement industries.

This story is related to the following:
HVAC

Search for suppliers of: Hydraulic Recoil Dampers

Iris Damper is calibrated for precise airflow measurement.

info@productnews.com (ThomasNet News) — Wed, 05 Dec 2007 07:44:36 -0500

Manufactured of galvanized steel and fitted with neoprene gasket for airtight mounting, Iris Damper uses interlocking steel plates and calibrated control lever to form adjustable aperture. It permits airflow to be adjusted and measured at one location, resulting in reduced field time and accurate air balancing. Available in 10 sizes from 4-32 in. with capacities ranging from 15-20,000 cfm, compact unit controls temperature, humidity, and ventilation rate.

This story is related to the following:
HVAC

Search for suppliers of: Iris Dampers | Air Conditioning Dampers

Damper System meets dust collection needs.

info@productnews.com (ThomasNet News) — Fri, 22 Dec 2006 07:46:42 -0500

Designed to optimize barrel change-outs while providing dust collection barrel seal, QuickLID pneumatic lift system comes in variety of configurations and can be custom built to user specifications. System allows collectors to remain running while barrel change-outs occur. Both Manual and Automated units offer pneumatic barrel lift. In addition, Automated system includes hopper bottom panel, pneumatic blast gate, flex hosing, and barrel cover.

This story is related to the following:
HVAC

Search for suppliers of: Compressed Air Operated Dampers

Iris Dampers control temperature/humidity/ventilation rate.

info@productnews.com (ThomasNet News) — Wed, 09 Aug 2006 08:09:55 -0500

Delivering air balancing accuracy to ±5%, Iris Damper permits airflow to be adjusted and measured at one location. It uses interlocking steel plates and calibrated control lever to form adjustable aperture. By measuring differential pressure across pressure ports and referring to matching performance curve, product enables airflow to be precisely determined. Ten sizes are available, from 4-32 in. dia, with capacities from 15-20,000 cfm.

This story is related to the following:
HVAC

Search for suppliers of: Iris Dampers

Radiation Dampers connect to ductwork at various angles.

info@productnews.com (ThomasNet News) — Wed, 19 Jul 2006 08:06:15 -0500

Fiberglass plenum box with ceiling radiation damper is designed as 1 and 1.5 in. thick rigid ductboard with registers/grilles or drop duct applications. Available in I, J, and K models with standard sizes ranging from 8 x 4 to 16 x 16. J and K models are offered in either R4.2 or R6.0 insulation thickness. All ceiling radiation dampers hold ARL approval for 1 hr fire resistance rating for use in UL Fire Resistance Rated Wood Truss Assemblies.

This story is related to the following:
HVAC
Safety and Security Equipment

Search for suppliers of: Plenums | Duct Dampers | Ceiling Dampers | Radiation Shielding Equipment

Drop-Gate Damper controls opening of vehicle tailgate.

info@productnews.com (ThomasNet News) — Thu, 25 May 2006 08:03:26 -0500

EZDOWN® drop-gate damper offers hands-free, fluid opening of vehicle's tailgate and also includes quick disconnect feature. Precise control prevents personal injury and vehicle damage. EZDOWN installation kit provides customers with all parts and tools necessary for installation, including Allen wrenches, cable bolt, tailgate mounting bolt and tee, and nut and cable foam.

This story is related to the following:
HVAC

Search for suppliers of: Dampers

Torque Dampers prevent lids from slamming shut.

info@productnews.com (ThomasNet News) — Fri, 28 Apr 2006 07:07:32 -0500

Torque Damper Industrial Hardware product line offers wide torque and range of two-way and one/two-way configurations. Dampers come in compact cartridges to provide smooth soft movement and function for electronic equipment, armrests, tool boxes, cabinets and furniture, and printer/copier covers. Product line includes rotary dampers with or without gears, disk dampers, and adjustable vane dampers. Rotary and disk dampers function in clockwise or counter clockwise directions.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
HVAC

Search for suppliers of: Hardware | Dampers | Rotary Dampers

Damper facilitates access to cabinets that open downward.

info@productnews.com (ThomasNet News) — Wed, 26 Apr 2006 08:12:32 -0500

Designed to facilitate opening and closing of doors and lids, Stab-O-Shoc® can securely hold door in open or closed position. Piston and valve system delivers damping force that influences nature of movements and vibrations. Hydraulic damping elements provide soft, quiet opening of cabinets with smooth motion and stopping control throughout process. Applications include cabinetry, woodworking, transport interiors, and kitchens.

This story is related to the following:
HVAC

Search for suppliers of: Vibration Dampers | Dampers

Guillotine Damper provides 100% gas isolation.

info@productnews.com (ThomasNet News) — Tue, 10 Jan 2006 07:13:19 -0500

Able to withstand extreme operating conditions, fully bonneted Flex-Seat(TM) Damper features self-cleaning rack-and-pinion drives that provide blade transfer, even under corrosive and debris-laden service conditions. Drives positively propel blade in both directions, eliminating possibility of mechanical binding. Self-cleaning perimeter seal consists of flexible metal seal covering solid convex seating surface that provides back up seal.

This story is related to the following:
HVAC

Search for suppliers of: Guillotine Dampers

Vibration Damper is RoHS-compliant.

info@productnews.com (ThomasNet News) — Wed, 28 Dec 2005 07:06:22 -0500

VD Series is designed with TPE center that provides shock and vibration protection as well as blind hole ends that provide rigid mounting in wood, particle board, and threaded metal or plastic. Ends are molded in flame-retardant UL94 V0 Nylon 6/6, and hand-installed parts accept range of panel thicknesses.

This story is related to the following:
HVAC

Search for suppliers of: Vibration Dampers

Dampers provide constant speed motion control.

info@productnews.com (ThomasNet News) — Tue, 26 Jul 2005 08:05:10 -0500

Compression and extension dampers are force-absorbing devices used where load or door must be lowered or swung in controlled motion at constant speed. Products are offered in rod/tube diameter sizes from .24 x .59 in. to .315 x .87 in., with stroke lengths from 2â�"7 in., extended lengths from 7.9â�"19.7 in., and max load capacities from 50â�"100 lb. Custom dampers are available in lengths to 26 in. with stroke to 10 in, and all dampers may be double-damped.

This story is related to the following:
HVAC

Search for suppliers of: Energy Absorbing Dampers | Dampers

Air Control Damper uses Lon-based programmable controller.

info@productnews.com (ThomasNet News) — Thu, 23 Jun 2005 08:10:04 -0500

Aluminum airfoil blade damper, Model IAQ-42 utilizes Speciflowâ"¢ technology with integrated airflow monitoring and control. It features rated accuracy of 5% of reading for face velocities of 300â�"2,000 fpm. Damper helps buildings meet minimum outdoor air requirements for ASHRAE Standard 62 and California Title 24. Unit is IECC compliant with leakage rating of 3 cfm/ft² at 1 in. wg or less.

This story is related to the following:
HVAC

Search for suppliers of: Ventilation System Dampers | Electrically Operated Dampers

Insulated Control Damper has thermally broken frame.

info@productnews.com (ThomasNet News) — Mon, 17 Jan 2005 07:35:38 -0500

Suited for outdoor air intake systems, Model ICD incorporates damper frame that has 2 thermal breaks with dual polyurethane resin gaps and is insulated on all 4 sides with polystyrene. Blades are thermally broken and filled with polyurethane for insulating characteristics. Product's design reduces transfer of heat or cold and virtually eliminates condensation.

This story is related to the following:
HVAC

Search for suppliers of: Heating Dampers

Snap-Fit Rotary Damper aids in opening doors.

info@productnews.com (ThomasNet News) — Thu, 07 Oct 2004 08:07:03 -0500

Available in 20 gf.cm and 40 gf.cm torque variations, RFRT-XXG-CLIP series aids in smooth opening of compartment or door. Snap-in design negates need for separate screws or ultrasonically welding this part. Push and snap-in motion holds damper firmly in place with its fixing wings. Using designated cut out in panel/chassis, damper is pushed into place through panel/chassis, exposing gear to integrate with toothed rack of compartment door.

This story is related to the following:
HVAC

Search for suppliers of: Rotary Dampers