ThomasNet Industrial Newsroom -

Blower and Frequency Converter promote efficient operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Jul 2008 07:42:24 -0500

At 10.2 in. long x 3.8 in. dia, MONO compact blower supplies up to 32 cfm and generates static pressure of 0.72 psi. It fits tight spaces and operates at ambient temperatures up to 140Â°F. With brushless motor, system is maintenance-free and suited for continuous operation. Separately available, FC 550 frequency converter conserves energy by restricting blower to lower frequency and maintaining minimal air volume. Air volume can be adjusted with preset frequencies or remote control.

This story is related to the following:
HVAC
Test and Measuring Instruments

Search for suppliers of: Frequency Converters | Air Blowers

Variable Speed Blowers are built for optimal service life.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 03 Jun 2008 07:42:12 -0500

Designed for gas-fired burner systems, NautilairÂ® 7.6 in. blowers incorporate brushless dc motors for reliable performance in excess of 20,000 hr with minimal maintenance. These pre-mix burner blowers deliver measured air/fuel mixture to optimize combustion as well as reduce N2O and CO emissions. Speed can be adjusted internally via onboard potentiometer or external PWM or dc control that actively varies blower performance, and onboard IntelliGen(TM) controller electronics integrate DSP.

This story is related to the following:
HVAC

Search for suppliers of: Variable Speed Blowers

Rotary Lobe Blower is 6 in. long at 1.75 lb.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Apr 2008 07:45:06 -0500

RL Series Rotary Lobe Blower delivers air flow up to 1.90 cfm, pressure to 2 psi, and vacuum to 4 in. hg. It can be mounted vertically or horizontally and is equipped with standard 3/8 in. OD hose barbs and 6 in. wiring harness. Featuring 12 V brushless dc motor and permanently lubricated timing gears, contactless blower is suited for fuel cells, laboratory pressure and vacuum sources, air samplers, gas boosting, and variety of portable air-moving devices.

This story is related to the following:
HVAC

Search for suppliers of: Rotary Lobe Blowers

Gas-Tight Blowers enable visual indication of seal condition.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 31 Mar 2008 07:40:55 -0500

Omega G Series gas-tight rotary blowers feature double piston ring and hardened-steel gas and oil seals. Vents may be piped back to suction or purged for single envelope, gas-tight operation. Input shaft double lip seals with oil barrier prevent air ingress and gas emissions, while mounted and piped reservoir provides visual indication of seal condition. Units are available in flows to 5,400 cfm at pressures up to 15 psi or vacuum up to 15 in. Hg.

This story is related to the following:
HVAC

Search for suppliers of: Gas-Tight Blowers

Blower Packages offer noise levels of 75 dBA or less.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 14 Feb 2008 07:13:24 -0500

CB 110 and CB 130C Com-paK Plus tri-lobe blower packages deliver up to 434 cfm in pressures to 15 psig and vacuum to 15 Hg. They include removable front panel, with automatic belt tensioning device, oil drains, and filter elements accessible from front as well as simplified check valve, angled inlet filter, and ventilation fan. Encased in sound dampening enclosure, devices have utility connections at rear, allowing multiple units to be mounted side-by-side.

This story is related to the following:
HVAC
Material Handling and Storage

Search for suppliers of: Blower Packages | Belt Driven Blowers

Brushless dc Blowers achieve max flow rates up to 190 cfm.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Jan 2008 07:30:47 -0500

Offered in bypass and thru-flow versions, variable-speed WindjammerÂ® Blowers accept line voltage up to 72 Vdc, depending on model. Units provide output pressure up to 97.7 in. H2O and are virtually maintenance free. Speed can be adjusted internally with onboard potentiometer, external PWM, or dc control. Measuring 5.7 in. dia, low-noise blowers are suitable for medical and industrial equipment, business machines, and fuel cells.

This story is related to the following:
HVAC

Search for suppliers of: Brushless DC Blowers

Combustion Blowers suit high-output gas-fired burner systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 02 Nov 2007 07:42:56 -0500

Engineered to deliver measured air/fuel mixture for optimized combustion and reduced nitrous oxide and CO emissions, Nautilair(TM) Series 12.3 in. variable speed brushless dc blowers can achieve maximum sealed pressure capabilities up to 170 in. of H2O and open flows to 800 cfm, depending on model. Versions can accept line voltage input of 120 and 240 Vac, and internal electronics convert ac input to dc. Units can be customized for specific application requirements.

This story is related to the following:
HVAC

Search for suppliers of: Brushless DC Blowers | Furnace Blowers | Variable Speed Blowers

Air Dryer resists corrosion and high temperatures.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 08 Oct 2007 07:50:06 -0500

Featuring split design that can be clamped around continuously moving material such as pipe, hose, cable, wire, and extruded shapes, stainless steel Super Air Wipe(TM) produces 360Â° airstream that can blow off, dry, clean, or cool material passing through center. Air velocity can be varied with instant on/off control, and additional shims can be installed if more blowoff force is required. Areas of use include food, chemical, and pharmaceutical applications.

This story is related to the following:
Cleaning Products and Equipment
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
HVAC
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Air Jets | Air Blast Equipment

Radial Blade Blower has precision-balanced design.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 01 Oct 2007 07:47:35 -0500

Constructed with welded 16-gauge steel housing and motor base, KRD radial blade direct drive blower is available without motor or with choice of single-/3-phase TEFC motors. Dynamically balanced cast aluminum wheel is self-cleaning and suited for air streams containing dirt, lint, or foreign material. Offering capacities to 3,420 cfm, precision-balanced air-moving package comes standard with CW bottom horizontal discharge - rotatable to 8 positions.

This story is related to the following:
HVAC

Search for suppliers of: Radial Wheel Blowers

Cooling Systems protect workers from heat stress, fatigue.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 04 Sep 2007 08:16:06 -0500

Mounted to short and full brim hardhats, PRO-AIR(TM) ACAIR3000(TM) provides forced ambient air throughout headwear to keep workers cool. Microprocessor-controlled unit, powered by rechargeable batteries, offers automatic and manual functions. Also available, ACAIR2000(TM) is designed for arc flash hood applications. It provides continuous air supply to worker while reducing hazardous effects of shield fogging. Rechargeable batteries offer 3 hr of continuous operation per charge.

This story is related to the following:
HVAC
Safety and Security Equipment

Search for suppliers of: Cooling Devices | Cooling Blowers | Personal Safety Products

Fan/Blower Motor delivers up to 1,025 W shaft power.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 31 Aug 2007 07:42:12 -0500

Based on electromotive coil technologies, NEMA 23 size Centrifugal Fan/Blower Motor provides 85 oz-in. continuous torque at 16,300 rpm, while operating at 80 V and 17.65 A, including amplifier losses. By replacing iron core and wire windings of conventional motors with precision machined copper sheet, issues such as hysteresis, cogging, and iron losses have been eliminated.

This story is related to the following:
HVAC
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Blower Parts | Fan Motors

Ionizer offers ESD control in process tool applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 20 Aug 2007 07:46:17 -0500

Maintaining ion balance of less than Â±1 V or better with external monitor and less than Â±3 V without, Ion Systems Critical Environment In-tool Ionizing Blower Model 5822i is suited for ESD control in process tools used in hard disk drive, backend semiconductor, and other automated manufacturing environments. It features internal automatic balance correction system, collimator, separate control box, and Hydro Wave bearing fan facility monitoring system connection.

This story is related to the following:
HVAC
Materials and Material Processing

Search for suppliers of: Blower Controls | Ionizing Air Blowers | Ionizers

Fume Hoods pass 3-stage ANSI/ASHRAE test.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 14 Aug 2007 07:43:32 -0500

Featuring redesigned air plenum and directional air vanes, 90% Energy Efficient Fume Hoods create uniform, low-velocity air curtain that contains and carries away fumes inside hood to rear exhaust port. Supplemental air is not forced down and on to hood operator. Combined supplemental air and exhaust air form push-pull effect that requires minimal energy power consumption of conditioned room air while offering maximum protection to lab personnel from toxic fumes.

This story is related to the following:
HVAC
Laboratory and Research Supplies and Equipment

Search for suppliers of: Fume Hoods | Laboratory Exhaust Fans & Blowers | Laboratory Fume Hood Exhausters | Laboratory Equipment & Supplies

Blower Systems include 15 ft duct and polyester carry bag.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 20 Jul 2007 07:46:28 -0500

Featuring portable design with carry handles and shoulder strap attachment, Air Bag Blower Systems are available with 8 or 12 in. metal blower, each with 9-blade fan and steel construction. Air Bag 8 features Â¼ hp motor and delivers up to 700 cfm, while Air Bag 12 is equipped with Â½ hp motor and produces 1,800 cfm. Both units contain single-ply vinyl/polyester PVC coated ducting. Zippered ends allow blower use without removing blower from carry bag.

This story is related to the following:
HVAC

Search for suppliers of: Portable Blowers | Motor Driven Blowers

Packaged Drying System replaces compressed air blow-offs.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 08 Jun 2007 07:44:47 -0500

Designed to remove debris and moisture, PowerDry(TM) System incorporates centrifugal blower that develops air flow and pressure from 3 hp motor. FDA compliant hose carries airflow to 6-nozzle air tube that delivers successive hits of high impact air. As alternative to compressed air, PowerDry eliminates potential contamination from oils and scale in compressed air supply. It features washdown design suited for food, beverage, and packaging operations.

This story is related to the following:
Chemical Processing and Waste Management
Cleaning Products and Equipment
HVAC

Search for suppliers of: Dryer Blow-Off Kits | Drying Systems | Centrifugal Blowers

Blower Package has polymer enclosure for quiet operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 23 Mar 2007 07:45:45 -0500

Along with motor and silencers, Com-paK Plus BB52C comes with Omega Plus tri-lobe blower in molded polymer shell. Scratch-, dent-, and corrosion-resistant enclosure lowers noise levels to 75 dB(A) or less, and all maintenance points - automatic belt tensioning device, oil drains, filter elements - are accessible through canopy. All power and process connections are at rear, allowing multiple units to be mounted side by side with no need for additional access clearance.

This story is related to the following:
HVAC
Material Handling and Storage

Search for suppliers of: Belt Driven Blowers | Blower Packages

Variable-Speed Brushless Blowers have electronic controls.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 28 Feb 2007 07:55:52 -0500

Offered with max diameter of 5.7 in. and heights from 5.30-6.87 in., IntelliGen(TM) series has sealed vacuum capabilities to 120 in. H20 and max wide-open flow to 280 cfm. Electronic drive controller incorporates DSP, offering customization capability to meet specific requirements. Each unit may be programmed to maintain constant pressure over wide range of flow or accurately maintain ratio of specific speed/output pressure to user's speed command input signal.

This story is related to the following:
HVAC

Search for suppliers of: Variable Speed Blowers | Brushless DC Blowers

Cold Gun minimizes heat build-up in machining operations.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 01 Feb 2007 06:59:29 -0500

Producing stream of 20Â°F air, High Power Cold Gun is suitable for continuous use without possibility of freezing up. Stainless steel vortex tube converts ordinary supply of compressed air into cold air, while flexible ball and socket hose directs cold air to point where heat is generated. Eliminating filtration, clean-up, and disposal of liquid coolants, gun is suited for laser cutting, tool sharpening, drill and cutter grinding, milling, drilling, and band sawing.

This story is related to the following:
HVAC
Portable Tools

Search for suppliers of: Cooling Blowers | Compressed Air Coolers | Blow Air Guns

Brushless DC Blowers serve medical and industrial uses.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 30 Jan 2007 07:17:34 -0500

MicrojammerÂ® variable-speed, brushless dc blowers provide output pressures up to 51 in. H2O and flows up to 26 cfm. Low voltage, 12/24 Vdc blowers feature bearing system and rear-balancing disk standard on 5.1 in. model. Microjammer 3.0, 3.3, and 4.5 in. blowers integrate Â½ wave electronic controller into motor to enable compact, 2-wire operation. Optional 8-wire configuration for connection to external, full wave electronic controllers can also be ordered.

This story is related to the following:
HVAC

Search for suppliers of: Variable Speed Blowers | Brushless DC Blowers

Motor Blowers incorporate digital speed control.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Jan 2007 07:30:24 -0500

Available for 120 and 230 V with 1- and 2-stage fan systems, GEN II INFIN-A-TEK switched-reluctance motor blowers come in 5.7 and 7.2 in. dia tangential bypass models as well as 5.7 in. dia AcustekÂ® low-noise peripheral bypass discharge model and 9.1 in. dia high-suction and high-airflow FLO-TEK(TM) tangential bypass models. Units incorporate multi-phase bearing alignment and air-seal protection system. They provide cool running operation in elevated thermal and high-vibration environments.

This story is related to the following:
HVAC
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Brushless Motors | Motor Driven Blowers