ThomasNet Industrial Newsroom -

Vertical Gas Fired Air Handler has energy efficient design.

info@productnews.com (ThomasNet News) — Tue, 15 Sep 2009 08:31:10 -0500

Available with staged heating from 75-400 MBH to provide right amount of heat depending on outside temperature, Model CAUA helps save on energy usage. Unit can handle up to 100% outside air and has multiple options for air mixing boxes, filter boxes, and discharge arrangements. With optional separated combustion and outside supply air capability, unit suits buildings requiring indoor air quality control. It can be coupled with M Series condensing unit to provide staged cooling as well.

This story is related to the following:
HVAC
Green & Clean

Search for suppliers of: Air Handling Systems

Air Handling Units offer unlimited range of configurations.

info@productnews.com (ThomasNet News) — Tue, 15 Sep 2009 08:31:09 -0500

Featuring bolted construction with lifetime ultra-low leakage seal, custom CTM-TB Series has baked electrostatic powder coat finish on exterior, polyurethane foam injected insulation up to R-26, and dual-gasketed access doors with roller-cam latch mechanisms. Units may be designed with integral desiccant wheels, runaround heat recovery coils, heat pipe coils, and air-to-air heat exchangers. Typical applications include pharmaceutical, research laboratories, and healthcare facilities.

This story is related to the following:
HVAC

Search for suppliers of: Air Handling Systems

Air Handling Units feature modular design.

info@productnews.com (ThomasNet News) — Tue, 15 Sep 2009 08:31:09 -0500

Providing alternative to fully custom air handlers, MLR Series offers variety of customizing options such as dual fans with isolation dampers, coated coils, HEPA filtration, and energy recovery. Units have 2 in. thick double-wall panels with basic thermal break design and injected polyurethane foam insulation. Available in indoor and outdoor designs, handlers offer capacities up to 40,000 cfm. Removable panels allow full access for servicing components.

This story is related to the following:
HVAC

Search for suppliers of: Air Handling Systems

Fan Coil Unit suits multi-story air handling applications.

info@productnews.com (ThomasNet News) — Wed, 05 Aug 2009 08:28:24 -0500

Available in 6 sizes with capacities up to 1,300 cfm, Model VSH vertical stack high-rise fan coil unit provides space heating/cooling for hotels, dorms, condominiums, and other multistory buildings. Units are available in concealed/exposed housing and can be configured with 2 or 4 pipe water coils and electric heaters with optional silent contactors. Features include three-speed PSC motor, 1 in. fiberglass insulation, 1 in. MERV 5 disposable filter, and front access panel to coils.

This story is related to the following:
HVAC

Search for suppliers of: Air Handling Systems | Fan Coil Units

Rack Cooling Solution eliminates hot spots in datacenters.

info@productnews.com (ThomasNet News) — Mon, 01 Dec 2008 07:50:02 -0500

HP 10K G2 Air Duct channels hot exhaust air from rear of racks directly into top plenum to eliminate hot spots and air mixing in datacenter, increasing cooling efficiency by returning hotter air to computer room air handler units. Solution suits racks using 5-14 kW power, and air duct is adjustable for different ceiling heights. With no fans or moving parts, units operate silently, can be retrofitted to existing problem racks, and can work with single or multiple racks.

This story is related to the following:
Plant Furnishings and Accessories
HVAC

Search for suppliers of: Computer Room Equipment & Supplies | Air Handling Systems | Air Ducts

HFC Refrigerant Condensers offer large tonnage capacities.

info@productnews.com (ThomasNet News) — Tue, 18 Nov 2008 07:41:21 -0500

Available in 50-140 ton capacities, R-410A condensing units feature average EER of 10.6 that exceeds ASHRAE 90.1-2010 requirements. All-aluminum, microchannel condensers help extend product life, and all-aluminum construction eliminates galvanic corrosion. If leak occurs, only lost refrigerant must be replaced. Split system air handling units are also available.

This story is related to the following:
HVAC

Search for suppliers of: Air Handling Systems | Refrigeration Condensers

Air Handling Unit is designed for ease of installation.

info@productnews.com (ThomasNet News) — Wed, 18 Apr 2007 07:36:36 -0500

Available for contactors and distributors, E-Series enhanced model air handler is designed for use with SpacePak air distribution system. Horizontal DX fan coil unit features leak- and rust-proof polyethylene drain pan as well as simplified internal electric cabinet with terminal blocks. Refrigerant connections are located at supply air end of unit for optimal accessibility. Other components include removable return air panel and integral Schrader valve.

This story is related to the following:
HVAC

Search for suppliers of: Air Handling Systems

Air Handling Units provide 100% fuel efficiency.

info@productnews.com (ThomasNet News) — Tue, 22 Aug 2006 08:04:02 -0500

Offered in air volumes from 1,000-60,000 cfm and inputs from 0.1-6.5 Mbtu/hr, direct-fired COMBAT® DF-Series provides multiple installation options, including indoor and outdoor as well as vertical and horizontal configurations. Galvanized steel heaters are available in natural gas or propane gas models with 30:1 fully modulating burner and double-width, double-inlet, forward-curved centrifugal fan that puts 100% of available heat in air stream.

This story is related to the following:
HVAC
Thermal and Heating Equipment

Search for suppliers of: Direct-Fired Heaters | Air Handling Systems

Air Handling Units incorporate energy recovery system.

info@productnews.com (ThomasNet News) — Thu, 30 Mar 2006 07:14:13 -0500

Integrated Custom Air Handling (ICA) units in active desiccant dehumidification systems are offered with optional PowerPurge(TM) energy recovery system. PowerPurge collects waste heat off hottest section of desiccant wheel and uses it to help with regeneration, reducing energy required for reactivation while lowering discharge temperature of process air.

This story is related to the following:
HVAC

Search for suppliers of: Air Handling Systems | Energy Recovery Systems

Vertical Indoor Air Handler has small-footprint design.

info@productnews.com (ThomasNet News) — Wed, 03 Aug 2005 08:08:59 -0500

Able to be floor-mounted in closet or mechanical room, Destinyâ"¢ combines blower coil with modular, low-pressure air handler. Full double-wall, foamâ�"injected panel construction facilitates cleaning for improved indoor air quality, while operating static pressure offers flexibility in unit ducting and placement. Suited for applications from 600â�"15,000 cfm, unit offers multiple coil, filter, and mixing box selections and also comes in horizontal configuration.

This story is related to the following:
HVAC

Search for suppliers of: Air Handling Systems

Vertical Indoor Air Handler heats and/or cools buildings.

info@productnews.com (ThomasNet News) — Fri, 17 Dec 2004 07:44:47 -0500

Featuring insulated double-wall construction, Model VFC vertical fan coil air handling unit is suited for use in schools, office buildings, and medical facilities. Panels on each side of unit offer access to all internal components, and internal neoprene isolation reduces potential of vibration noise. Equipped with flexible blower connection to housing, unit is available in 7 sizes with capacities from 300â�"3,500 cfm and up to 3.5 in. wg.

This story is related to the following:
HVAC

Search for suppliers of: Air Handling Systems

Indoor Air Handler suits limited space applications.

info@productnews.com (ThomasNet News) — Thu, 02 Sep 2004 07:48:27 -0500

Available in 8 sizes, horizontal Model LFC Low Profile Fan Coil covers performance range from 300â�"4,700 cfm and up to 3.5 in. wg. It features insulated double wall housing, removable stainless steel drain pan, 4 access panels, and internally-isolated drive frame to help eliminate potential for noise transmitting through ductwork. Unit is suited for cooling and/or heating schools, office buildings, churches, apartments, and condominiums.

This story is related to the following:
HVAC

Search for suppliers of: Air Handling Systems

Centrifugal Utility Sets handle temperatures to 600°.

info@productnews.com (ThomasNet News) — Tue, 08 Apr 2003 07:38:16 -0500

With Class I or Class II construction, fans offer forward curve, backward inclined, or airfoil wheels in diameters from 7â�"36 in. Units are AMCA certified for sound and air and are available with UL 705 or UL 762 listings. They are offered in galvanized steel, hot dipped galvanized steel, 6 mil epoxy, stainless steel, or all aluminum. Accessories include variable inlet vanes, outlet shutters, and weather covers.

This story is related to the following:
HVAC

Search for suppliers of: Centrifugal Fans | Air Handling Systems

Custom Air Handler features double wall construction.

info@productnews.com (ThomasNet News) — Mon, 20 Jan 2003 08:13:19 -0500

Integrated Custom Air Handler incorporates no-through metal design in either 2.5 or 4 in. wall thickness. Smooth-fitting panels create fewer joints, preventing leaks, while sloping roof eliminates standing rainwater. Doors are available in inward and outward swinging or plug design. Standard options include chilled water piping, refrigeration packages, filtration, full temperature and humidity controls, face and bypass heating and humidity control.

This story is related to the following:
HVAC

Search for suppliers of: Air Handling Systems

Snow Shieldâ"¢ protects filters by melting snow.

info@productnews.com (ThomasNet News) — Thu, 26 Dec 2002 07:37:40 -0500

Deep pocket design prevents snow from clogging air filters and diminished air flow into buildings. Design also provides constant drainage, prevents refreezing of snowmelt, and eliminates stagnant water pools. Extracting snow flakes from air as it enters buildings, product installs into factory built air handlers and field built HVAC systems. It is available in various panel sizes for 3,000â�"30,000 cfm range; multiple panels can handle over 100,000 cfm.

This story is related to the following:
HVAC
Materials and Material Processing
Architectural and Civil Engineering Products

Search for suppliers of: Snow Melting Systems | Air Handling Systems | Ice & Snow Melters | Snow Filters

Flow Converting Devices can be used with blowers.

info@productnews.com (ThomasNet News) — Wed, 02 Jan 2002 13:37:37 -0500

Flow-converting devices are for use with regenerative blowers ranging from 1/3 hp to 50 hp. Airflow can instantly change from vacuum to pressure, or can be rerouted to different lines. Flow converting devices can be actuated by 24 VDC, 115 VAC, 220 VAC, or pneumatically, and can be mounted directly to blower or down stream.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
HVAC

Search for suppliers of: Air Handling Systems | Converters

Isolation Systems protect against airborne contaminants.

info@productnews.com (ThomasNet News) — Thu, 08 Nov 2001 08:03:00 -0500

AirShelterâ"¢ Isolation Systems use HEPA-filtered air to create contained, positive-pressure environments. Their main component is American Air Filter's AstroCel® II HEPA filter. The combination of positive pressure ventilation(PPV) and HEPA filtration provides filtration levels greater than 99.97% on 1 to 5 micron particles. AirShelter line includes ceiling and floor-mounted HEPA filtration systems and associated monitoring and control equipment.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
HVAC

Search for suppliers of: Air Handling Systems | Air Purification Systems | Air Filters